How Many Days Does It Usually Take to Repair a Car at a 4S Shop?

What are the causes of engine shaking and abnormal noise?

Engine is a key component of many machines. There are three main reasons for its shaking and abnormal noise: 1. Root cause: Engine mount damage. The mount bears continuous repeated impacts, making rubber prone to fatigue. The generated high heat will inevitably cause vibration-damping rubber to age over time, weakening its damping effect. Replacement is needed to prevent engine vibration from transmitting into the cabin during operation. 2. Damage to the soft rubber connection between engine and frame. Natural rubber lifespan is 5 years, while mount rubber is designed for 80,000-100,000 km. Both pure rubber and hydraulic mounts face aging/cracking issues requiring inspection and replacement. 3. Other causes: Issues like flywheel, cylinder misfire, or carbon buildup can also cause idle shaking.

7

3

Share

How often should Nissan transmission fluid be changed?

It is recommended to change the Nissan CVT transmission fluid approximately every 40,000 to 60,000 kilometers, and it is necessary to use the manufacturer's specific fluid. Below is an introduction regarding Nissan transmission: 1. Taking the Nissan CVT transmission as an example, most failures occur around 100,000 to 150,000 kilometers, and their common characteristic is that the transmission fluid has never been changed. Conversely, those that had the transmission fluid changed before this mileage rarely encountered issues. 2. The working environment of CVT transmission fluid is relatively harsh, and oxidation is inevitable under high temperature and high pressure. At the same time, moisture in the air can be absorbed by the transmission fluid, leading to deterioration of the fluid quality, which reduces its cleaning, lubrication, and cooling functions. 3. If symptoms such as sluggish acceleration, jerky gear shifts, or rough shifting appear while driving, it may be time to consider changing the transmission fluid.

19

5

Share

What are the safety precautions when maintaining the cooling system?

Safety precautions when maintaining the cooling system include the following: After parking, check for large amounts of water under the car and any water traces in the engine compartment. Regularly clean the front radiator and condenser, using high-pressure air or a water gun. When the water temperature is high, observe whether the electric fan is running or turn on the air conditioning. During routine maintenance, add antifreeze as required. Adding antifreeze can raise the boiling point of the coolant, reduce scale formation, and minimize impurities. When checking the engine coolant level, wait until the engine has cooled down, then inspect the coolant level in the reservoir. If the level is between the high and low marks on the reservoir, it indicates sufficient fluid. If the level is low, add coolant. If the coolant in an automatic transmission vehicle appears milky white or pink, it is often due to transmission cooling oil leaking into the radiator. Stop the vehicle immediately and contact a repair shop. If the coolant is insufficient, top it up until it overflows, avoiding the use of hard water (which can cause scale buildup). If the coolant becomes dirty or full of scale, drain all the coolant and clean the cooling system. Causes and solutions for cooling system failures: Low coolant level in the cooling system: Cracks or leaks in the radiator or damage to the cylinder water jacket, causing coolant to leak; damaged inlet or outlet hoses leaking water; faulty switches leading to fluid leakage. Solution: Stop the leak. If severe, replace the radiator. Replace the inlet and outlet hoses; replace the switch. Excessive engine coolant: Insufficient coolant; broken or loose fan drive belt, reducing efficiency; excessive scale in the cylinder water jacket and radiator, affecting cooling performance; abnormal water pump operation causing poor water circulation; bent radiator fins or air in the connecting hoses; faulty water temperature gauge or sensor. Solution: Add coolant; replace or tighten the belt; clean the cooling system; repair the water pump; inspect the outlet hose, eliminate any constriction, and repair the radiator fins.

2

5

Share

What are the symptoms of a faulty crankcase ventilation valve?

Crankcase ventilation valve failure can lead to the following symptoms: 1. It can cause an increase in pressure within the crankcase and contaminate the engine oil inside. When the engine is running, the combustion of the air-fuel mixture pushes the piston downward, allowing some gases to enter the crankcase through the piston rings. When there is an excessive amount of gas in the crankcase, the pressure inside increases, making it more difficult for the piston to move downward. 2. When the crankcase one-way valve is damaged, severe oil leakage may occur from the oil pan gasket. The crankcase ventilation system includes a one-way valve; if this valve is damaged, it can cause excessive pressure inside the crankcase, potentially leading to oil seepage from some gaskets.

2

Share

What to Do If Your Car License Plate is Cloned for Traffic Violations?

If your car license plate is cloned for traffic violations, the handling methods are as follows: 1. Collect evidence proving your absence: After confirming that your plate has been cloned, start gathering evidence that proves you were not present at the scene of the violation. This includes parking receipts, highway toll receipts, videos saved from your dashcam, and surveillance footage from parking lots or residential areas. 2. File an appeal with the traffic management department: Once you have collected sufficient evidence of your absence, you can submit an appeal to the traffic management department where your vehicle is registered or where the violation occurred. 3. Apply for a new license plate number: When appealing the violations caused by the cloned plate, you must first settle any legitimate traffic violations associated with your own vehicle. Violations attributed to the cloned plate will be handled after verification. Within 15 days of processing at the local vehicle management office, you can apply to change your license plate number, i.e., request a new license plate.

8

3

Share

When Will You Receive the SMS After Running a Red Light?

After running a red light, the SMS notification for the violation is usually received within 3 to 7 days, and at the latest within about 13 days. However, some cities have now introduced "instant electronic police capture alerts," where you can receive an SMS notification within 5-10 minutes of being captured. However, this notification does not equate to a violation; it serves only as a capture alert. The final determination of whether it constitutes a violation takes 3-7 days. If it is indeed a violation, you will receive another SMS notification. For violations captured by surveillance cameras, vehicle owners generally do not receive the violation SMS immediately; there is a delay, and the duration of this delay can vary. This is because after the electronic camera captures the violation, the relevant violation information needs to be transmitted through a dedicated channel to the traffic police management center, where it is compiled and then handed over to the relevant traffic police personnel for verification. Once the violation is confirmed, the system automatically retrieves the vehicle owner's phone number based on the license plate information and then sends the violation details via SMS to the owner, who will then receive the corresponding violation SMS. After receiving the violation SMS, the vehicle owner must settle the violation within one month before the annual vehicle inspection. Generally, if a vehicle owner suspects they have committed a violation, they can use 15 days as a benchmark. If no violation SMS is received beyond 15 days, it is likely that no violation has been recorded. Methods for Traffic Violation Queries: Traffic violation queries refer to checking motor vehicle violations of traffic management regulations through online platforms or query terminals. Methods for vehicle violation queries include website queries, phone queries, SMS queries, mobile app queries, and offline terminal queries. Website Query: You can search for "vehicle violation query" and enter your vehicle information to check. Phone Query: To query violations, you can call the local 114 (area code + 114) or 12580 for confirmation. Violations can only be processed at the location where the violation occurred or where the vehicle's license plate was issued. For on-the-spot violations, such as those directly caught by traffic police, they must be processed at the violation location. SMS Query: Open your phone's SMS interface; enter "WZ" followed by your license plate number and color in the message body; enter "1062650001" as the recipient and click send. Mobile App Query: Open the Traffic Management 12123 app, select "violation query," and find any unprocessed violations to clear them. Offline Terminal Query: You can visit the local traffic management hall and use the self-service query machine to enter your license plate number and check recent violation records.

10

0

Share

How Many Days Does It Usually Take to Repair a Car at a 4S Shop?

What are the causes of engine shaking and abnormal noise?

How often should Nissan transmission fluid be changed?

What are the safety precautions when maintaining the cooling system?

What are the symptoms of a faulty crankcase ventilation valve?

What to Do If Your Car License Plate is Cloned for Traffic Violations?

When Will You Receive the SMS After Running a Red Light?

How to Clean Asphalt from Car Surface?

What is the appropriate tire pressure?

What are the steps to replace the cabin air filter?

What to Do When the Spark Plug Cannot Be Removed?