How many days does it usually take to learn reversing into the garage in Subject 2?

1 Answers
StJasper
07/25/25 4:42am
Generally, learning to reverse into the garage takes about 4 class hours per day, and it usually takes about a week to master, depending on individual circumstances. Criteria for reversing into the garage: Failing to follow the prescribed route or sequence results in disqualification; the vehicle going out of bounds, failing to enter the garage, or stopping midway results in disqualification; taking more than 4 minutes to complete the reversing into the garage results in disqualification. Standard garage dimensions: The standard dimensions for reversing into the garage in Subject 2 are a garage length of 5.25 meters and a width of 2.3 meters. No stopping during the test: There is no time limit for reversing into the garage, but it's important to note that stopping midway is not allowed. If the wheels remain stationary for 3 seconds, the system will judge it as stopping midway, so controlling the speed is crucial.
Was this review help?
2
4
Share
More Forum Discussions

Are sports cars more commonly manual or automatic transmission?

Sports cars come with both automatic and manual transmissions. Most sports cars are manual transmission, as manual transmission sports cars have faster acceleration, stronger control feel, and better speed control. Automatic transmission sports cars allow drivers to be more relaxed, without constantly thinking about shifting gears. The advantages and disadvantages of sports cars are as follows: 1. Advantages: Sports cars are called sports cars because of their high speed and more agile response during acceleration, which is why many people choose them. Additionally, sports cars have better aerodynamics, making them more eye-catching when driving, and they are highly favored by young consumers. The strong engine sound of sports cars also provides a real experience of speed and passion. 2. Disadvantages: However, sports cars are not perfect, especially in terms of comfort. Due to the pursuit of speed, sports cars are designed to be lower, which may make the driving position more reclined and uncomfortable for larger individuals. The low chassis also requires extra caution when going over speed bumps.
12
2
Share

What are the causes of ESC system failure?

When the ESC warning light illuminates, possible causes include: 1. Sensor failure: Malfunction in ESC system sensors such as yaw rate sensor, lateral acceleration sensor, or steering wheel angle sensor; 2. Wiring issues: Problems in system wiring including short circuits or open circuits; 3. Control unit failure: Malfunction in the control unit itself may also lead to ESC failure. Below is an introduction to the ESC system: 1. System function: ESC is an electronic vehicle stability control system and a supplementary system for driving safety, which helps avoid hazards. During rapid turns or lane changes when the vehicle becomes extremely unstable, it compensates for vehicle stability by applying wheel brakes or controlling engine torque. ESC is a vehicle stability system - continuous illumination indicates system failure, while flashing indicates active operation. 2. Components: The system consists of three main parts: sensors, electronic control unit (ECU), and actuators. The electronic control unit monitors vehicle operating conditions and intervenes in the engine and brake system control. A typical automotive electronic stability control system mainly includes four wheel speed sensors, steering wheel angle sensor, lateral acceleration sensor, yaw rate sensor, and brake master cylinder pressure sensor in its sensor array. The actuation part includes conventional brake systems (vacuum booster, pipelines, and brakes), hydraulic regulators, etc. The electronic control unit interacts with the engine management system to intervene and adjust engine power output.
17
5
Share

What Are the Tips for Using Large Truck Rearview Mirrors?

Truck rearview mirrors can be divided into: main rearview mirror, wide-angle mirror, blind spot mirror, front down-view mirror, and interior rearview mirror. Here are the usage tips: 1. Main rearview mirror The main rearview mirror is the largest reflective surface among all mirrors. For the left main exterior rearview mirror, it is recommended to adjust the ground plane to the middle of the mirror vertically, and adjust horizontally so that the body occupies one-quarter of the mirror's field of view. This allows you to see both the condition of the cargo box and the road on both sides of the vehicle. 2. Wide-angle mirror adjustment: Vertically, it is recommended to adjust the ground plane to the middle of the mirror, which provides a clear view of vehicles on both sides behind. Horizontally, it is suggested to adjust so that the body occupies one-quarter of the mirror's field of view. This setup allows visibility of both the cargo box and the road on both sides of the vehicle. 3. Blind spot mirror: Vertically, it is recommended to adjust so that the body occupies one-quarter of the mirror's field of view. Horizontally, it is suggested to adjust so that the tire midline is positioned at two-fifths of the blind spot mirror. This provides a clear view of the ground on the right side of the vehicle and partial visibility of the vehicle body.
10
1
Share

Why did both the high and low beams suddenly stop working?

There are many reasons why both high and low beams may stop working. Below are common faults: 1. Wiring issues: Poor or loose connections, or improperly seated connectors can cause this type of fault. 2. Incorrect wattage: Using bulbs with inconsistent wattage during replacement may lead to this issue. 3. Usage duration: In some vehicle models, prolonged use can cause aging or cracking of the reflector (headlight), resulting in light failure or insufficient brightness, necessitating headlight replacement. When poor sealing due to prolonged use (or quality issues) leads to water ingress, foreign objects, or dust accumulation that obstructs the light, it can result in weak or insufficient brightness.
6
0
Share

Can You Downshift Directly from 3rd Gear to 1st Gear?

If the vehicle speed significantly decreases, you can skip gears when downshifting. Below is relevant information about downshifting in vehicles: 1. Purpose of downshifting: While driving, when you feel insufficient engine power and the speed gradually decreases, it indicates the current gear can no longer maintain normal vehicle operation. You should promptly and swiftly shift to a lower gear. 2. Key points of downshifting: Release the accelerator pedal, quickly depress the clutch pedal, move the gearshift lever to neutral, release the clutch pedal, quickly tap the accelerator pedal with your right foot, rapidly depress the clutch pedal again, move the gearshift lever to the next lower gear, and release the clutch pedal following the quick-pause-slow technique to continue driving in the new gear.
15
0
Share

How to Adjust Bose Car Audio for Optimal Performance?

To achieve the best performance from your Bose car audio system, you can perform adjustments such as head unit tuning, front soundstage adjustment, rear soundstage tuning, and bass adjustment. Here is some relevant information about car audio systems: 1. Introduction to Car Audio: Car audio (auto-audio) refers to the radio and playback devices installed to alleviate the monotony of driving and traveling for both the driver and passengers. Initially, car AM radios were used, followed by AM/FM radios and cassette players, evolving to CD players and digital audio systems compatible with DCC and DAT. 2. Components of Car Audio: A car audio system mainly consists of three parts: the head unit, speakers, and amplifier. The head unit is the most crucial component of the car audio system, akin to the human brain, as it controls the type of sound produced.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.