How many days does it take to know about a traffic violation?

How to Solve the Problem of Window Noise?

Here are the specific causes and solutions for window noise: 1. Component aging: Turn on the switch button, observe the movement track, and check if there is any obvious up and down fluctuation. If there is, it should be due to component aging, and the only solution is to replace the component. 2. Foreign objects: After long-term use, it is inevitable that there will be some debris particles on the slide rail. When moving on the slide rail, friction with these debris can cause noise. Open the lubricant and apply it to both sides of the slide rail. 3. Loose screws: Loose screws can cause noise in the roof and sunroof, and even pose a risk of falling off. Tightening the screws can solve the problem.

14

5

Share

How to open the front hood of an Audi?

Audi front hood opening method is: 1. The engine hood release lever is located on the left front side of the driver's position; 2. Grasp the lever and pull it outward with slight force to unlock the front hood; 3. After unlocking, locate the secondary release catch at the front hood position and flip it to fully open the engine compartment; 4. Once opened, automatic support rods will hold the hood up on both sides - to close, simply apply moderate downward pressure on the hood. The Audi is a dynamic and versatile SUV. Taking the Audi Q5 as an example, its body dimensions are 4629mm in length, 1898mm in width, and 1655mm in height.

4

5

Share

What Causes Chassis Noise on Slightly Bumpy Roads?

Here are the specific reasons for chassis noise on slightly bumpy roads: 1. Disc brake malfunction: When driving at low speeds on flat roads, irregular intermittent noises occur near the wheel axle. The noise slightly intensifies with increased speed but remains unchanged during uphill, downhill, or turns. On uneven roads, the noise becomes louder, and pressing the brake pedal reduces or eliminates the sound. During inspection, rotating the wheels back and forth can reproduce the noise. This is caused by damage, deformation, or detachment of the disc brake's shoe support plate, damping spring plate, or guide plate, increasing the gap between the brake shoe and caliper bracket, leading to impact noises. Deformed parts should be repaired and detached parts replaced at a service station. 2. Front suspension ball joint failure: When driving at low gear on bumpy roads, continuous noise occurs near the front axle, intensifying with worse road conditions and higher speeds. Vigorously shaking the front of the parked vehicle produces noise. On smooth roads, irregular intermittent noises resembling metal cracking impacts occur. This is due to excessive clearance between the ball joint and its socket. Since the ball joint socket is a sealed structure and non-detachable, replacement at a service station is necessary. 3. Front wheel shock absorber failure: On smooth roads, slight noise can be heard from the front of the vehicle, worsening during sharp turns. Pressing down on the front of the parked vehicle to create rebound motion reproduces the noise, with intensity proportional to the force applied. The vehicle feels stiff and lacks elasticity. This usually results from driving on poor roads with inadequate maintenance, causing shock absorber oil leakage and damage. Depending on severity, repair or replacement at a service station is required.

8

5

Share

What is the function of the lubrication system?

The function of the lubrication system is to continuously deliver an adequate amount of clean oil at an appropriate temperature to the friction surfaces of all transmission components during engine operation, forming an oil film with lubricating properties. The lubrication system not only effectively reduces friction between parts but also minimizes power loss, ensuring the engine's service life while maintaining optimal working conditions. The lubrication system refers to the collective term for a series of oil supply and discharge devices and their auxiliary components that deliver lubricants to lubrication points. Lubrication systems can be divided into five types: circulating lubrication systems, centralized lubrication systems, spray lubrication systems, oil immersion and splash lubrication systems, and total-loss lubrication systems for oil and grease.

9

2

Share

What is the real fuel consumption of the Accord 1.5t?

The real fuel consumption of the Accord 1.5t is 7.81L/100km. Here are some methods to reduce fuel consumption: 1. Strengthen car maintenance: Car adjustments and maintenance affect engine performance and driving resistance. Owners should regularly visit car repair shops for routine maintenance, such as checking tire pressure, wheel alignment, adjusting brake pad and drum clearance, lubricating points on the car chassis, timely oil changes, and filter inspections. Additionally, among the specified oil types in the manual, choose the one with the lowest viscosity, as higher viscosity increases friction and fuel consumption. 2. Avoid prolonged engine idling: Engine fuel consumption during idle is much higher than during normal driving. Therefore, if the car is not moving for a long time, such as when parked and waiting, it is best to turn off the engine. During cold starts, warming up the car should not exceed one minute; maintaining low-speed driving for a few minutes is sufficient. 3. Avoid sudden braking and acceleration as much as possible: Smooth and steady driving is the most fuel-efficient. During the starting phase, avoid stomping on the accelerator. The correct method is smooth acceleration, and after reaching a certain speed, maintain a steady speed as much as possible. When driving in congested areas, also pay attention to the road conditions ahead to avoid sudden braking.

2

4

Share

Will insurance cover a car flooded in a rainstorm?

Whether insurance covers a vehicle flooded due to a rainstorm depends on the type of insurance purchased by the owner: Compulsory traffic insurance (CTI): If only CTI is purchased, the insurance company will not compensate. CTI and commercial insurance: If both CTI and commercial insurance are purchased, the insurance company will not cover engine damage. If the commercial insurance includes vehicle damage insurance, the owner can call the insurance company's claim hotline to report the incident after the vehicle is flooded. The insurance company will then follow the procedure to compensate. However, it is important to note that the vehicle damage insurance does not cover engine flooding in this case. Other damages to the car, such as interior or electronic control units, will be assessed for liability and compensation based on the specific circumstances. CTI, commercial insurance, and water-related damage insurance: If the owner has purchased CTI, commercial insurance, and water-related damage insurance, the insurance company will provide compensation.

6

3

Share

How many days does it take to know about a traffic violation?

How to Solve the Problem of Window Noise?

How to open the front hood of an Audi?

What Causes Chassis Noise on Slightly Bumpy Roads?

What is the function of the lubrication system?

What is the real fuel consumption of the Accord 1.5t?

Will insurance cover a car flooded in a rainstorm?

What are the differences between gasoline engines and diesel engines?

What is the Function of an Automotive Oxygen Sensor?

How Often Should Car Shock Absorbers Be Replaced?

What does LO mean on the car air conditioner?