How Many Days Does It Take to Check Traffic Violation Information After Running a Red Light?

2 Answers
SanNaomi
07/24/25 10:55pm
After running a red light, it usually takes 3 to 7 days to check the violation information, with the latest not exceeding 13 working days. However, some cities now offer "instant electronic police capture alerts," where you can receive an SMS notification within 5-10 minutes of being captured. However, the notification does not equate to a violation; it serves only as a capture alert. Whether it is a confirmed violation will take 3-7 days to determine. If it is indeed a violation, you will receive another SMS notification. For traffic violations captured by surveillance cameras, vehicle owners generally do not receive an immediate violation SMS; there is a delay, and the duration may vary. This is because after an electronic camera captures a violation, the relevant violation information needs to be transmitted through a dedicated channel to the traffic police management center, where it is compiled and then forwarded to the relevant traffic police department staff for verification. If confirmed as a violation, the system will automatically retrieve the vehicle owner's phone number based on the license plate information and send the violation details via SMS. Only then will the owner receive the corresponding violation message. After receiving the violation SMS, the vehicle owner must go to the traffic police department where the violation occurred within one month before the annual vehicle inspection to handle the matter. Generally, if a vehicle owner suspects they have committed a violation, they can use 15 days as a benchmark. If no violation SMS is received after 15 days, it is likely that no violation was recorded. Traffic Violation Query Methods: Traffic violation queries refer to checking motor vehicle violations of traffic management regulations via the internet or query terminals. Vehicle violation queries can be conducted through vehicle violation websites, phone calls, SMS, or mobile apps. Website Query: You can search for "vehicle violation query" and enter your vehicle information to check. Phone Query: To query violations, you can call the local 114 (area code + 114) or 12580 for traffic violation confirmation. Violations can only be processed at the location where the violation occurred or where the vehicle's license plate was issued. For on-the-spot violations, such as those directly caught by a traffic officer, they must be handled at the violation location. SMS Query: Open your phone's SMS interface; enter "W + license plate number" in the message content; enter 1062650001 as the recipient, then click send. Mobile App Query: Open the Traffic Management 12123 app, select "violation query," and find unresolved violations to clear them.
Was this review help?
3
1
Share
Mckenzie
08/10/25 3:11pm
I've had a similar experience before. After running a red light, it usually takes a few days for the violation to show up in the system, typically 3 to 7 days for the data to update. If you're in a hurry, you can download the Traffic Management 12123 App on your phone, register, and link your license plate number to monitor it in real time. Once, I accidentally ran a red light during a weekend road trip, checked on Tuesday and found nothing, but the ticket didn't appear until Friday. Nowadays, with technological upgrades, after the camera captures the violation, it needs to be uploaded and reviewed. The processing speed depends on the efficiency of the local traffic department—big cities might show the result the same day, while smaller towns may take a bit longer. My advice is not to keep refreshing the webpage anxiously. Just drive safely and check again after the weekend. Also, if you do find a violation, make sure to handle the fine promptly. Delaying it could affect your driver's license points, so be more careful next time you drive—safety first. In short, just be patient and wait it out.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

What are the common faults of the Cadillac SRX?

It is difficult to start the engine for the first time after each refueling. The seat heating switch automatically pops up. Below is some relevant information about the Cadillac SRX: 1. Dynamic Stability Control System: Utilizes a 4-channel (independent control of all four wheels) active control system to manage TCS and ABS, assisting drivers in confidently handling wet, snow-covered, or icy road conditions; prevents understeer or oversteer during high-speed driving or sharp turns. Delivers excellent tracking performance and composed handling. 2. Rear Seat Entertainment System: The upgraded rear seat entertainment system in the Cadillac SRX features a Blu-ray player and two 8-inch displays, along with a remote control and wireless headphones, allowing passengers to customize their entertainment programs and enjoy a mobile cinema-like audiovisual experience for second-row passengers.
10
5
Share

Can the old Cruze use 95 octane gasoline?

Yes, it can. Here are the relevant details: 1. Exterior: The most noticeable change in appearance is the alteration of the rear emblem, where "330T" and "320" are used to distinguish between models equipped with the 1.4T turbocharged engine and the 1.5L engine, respectively. This makes the Cruze the second Chevrolet model, following the Equinox, to adopt a three-digit and letter naming system for its rear emblem. 2. Powertrain: The vehicle continues to be powered by the 1.5L and 1.4T engines, with maximum power outputs of 114 horsepower and 150 horsepower, respectively. In terms of the transmission system, the 1.4T model is paired with a 7-speed dual-clutch transmission, while the 1.5L model comes with either a 6-speed automatic transmission or a 6-speed manual transmission.
3
3
Share

What procedures are required for replacing a car engine?

The procedures required for replacing a car engine are: 1. The vehicle owner must bring their ID card, vehicle license, motor vehicle registration certificate, and proof of the new engine to the vehicle management office. A staff member will issue a vehicle inspection application and take an imprint of the new engine number, providing the owner with an envelope and the inspection application form; 2. The owner takes the envelope and inspection application form to the inspection station for vehicle testing; 3. The inspection station will reseal the envelope previously given to the owner and also provide an inspection compliance certificate. The owner then takes these two documents, along with the original and photocopies of the vehicle license, registration certificate, ID card, temporary residence permit, etc., to the location where the imprint was taken for photography. After obtaining the photos, they can proceed to the service hall to complete the process.
6
1
Share

What is the speed range for second gear?

Second gear is suitable for speeds between 20 km/h and 35 km/h. Gear shifting tips: Shift gears according to the vehicle speed. Generally, start in first gear, shift to second gear after driving a few meters, then shift to third gear when the speed reaches above 20 mph but below 35 mph, shift to fourth gear when the speed reaches above 35 mph but below 45 mph, and shift to fifth gear when the speed exceeds 45 mph. The above applies to standard five-speed transmission vehicles. For vehicles with six or more gears, you can upshift each time the speed increases by approximately 15 mph. Pay attention to the engine RPM during gear shifts and shift promptly when it reaches around 2,500 RPM. Coordinate the clutch and throttle properly during shifting: depress the clutch fully, release the throttle pedal immediately, then quickly shift to the appropriate gear.
3
0
Share

Where is the USB port of the Haval F7?

The USB port of the Haval F7 is located in the storage compartment below the gear lever. During use, ensure that the connection between the external device and the input interface remains stable. Avoid unplugging the internal device randomly during playback to prevent the system from failing to recognize the device properly. The Haval F7 is a compact SUV featuring a brand-new hexagonal front grille design and eagle-eye-style LED headlights. Its body dimensions are 4620mm in length, 1846mm in width, and 1690mm in height, with a wheelbase of 2725mm. This model is equipped with two engines: a 1.5L turbocharged engine and a 2.0L turbocharged engine.
10
1
Share

Can a Car Be Started If Water Enters the Exhaust Pipe?

The car exhaust pipe is a device installed between the engine exhaust manifold and the muffler to reduce vibration and noise, facilitate installation, and extend the lifespan of the exhaust muffler system, providing flexible connection for the entire exhaust system. Whether a car can be started if water enters the exhaust pipe depends on the amount of water ingress, which can be divided into the following two scenarios: 1. Small amount of water ingress, can start: The typical wading depth for cars is between 50-70 cm, and the position of the exhaust manifold is similar in height to the intake manifold. 2. Large amount of water ingress, cannot start: The end of the exhaust pipe has a muffler. If a large amount of water enters (e.g., due to backflow during wading or flooding when parked in low-lying areas and the engine is off), it can accumulate in some dead corners of the muffler, eventually leading to rust and perforation.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.