How many days can a tire last with a nail in it without being pulled out?

2 Answers
Zara
09/02/25 2:38am
A tire with a nail in it can last for 1-2 days without being pulled out. The performance and structure of the tire are as follows: Tire performance: The tire is one of the important components of a car, which directly contacts the road surface, ensuring good ride comfort and smooth driving, as well as good adhesion between the wheel and the road surface, thereby improving the car's traction, braking, and passability. Tire structure: A tire generally consists of three parts: the outer tire, the inner tube, and the bead. The inner layer of the tire has a rubber layer with excellent airtightness, gradually moving towards lightweight development. The outer tire is mainly composed of the carcass, tread, sidewall, and bead, with the carcass and bead forming the force-bearing structure of the car's pneumatic tire.
Was this review help?
16
1
Share
ElenaAnn
09/14/25 5:01am
I remember when I got a nail in my tire last year and decided to leave it for a bit; it lasted three whole days before the air started leaking noticeably. Each morning, I'd check the pressure, and it dropped slowly—about 2-3 PSI a day at first. Things like where the nail pierced the tread played a big role: center punctures can act like a temporary plug, sealing the hole longer, while side hits leak faster. Driving habits affected it too—taking smooth roads helped it hold, but highway speeds or bumps made it worse. By day four, it was dangerously low, risking a blowout or rim damage. I learned to never push it; get it repaired within 24 hours to save money and stay safe. Always carry a tire pressure gauge and know where your nearest auto shop is for quick fixes.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

Should car tires be replaced after five years of use?

Tires that have been in use for 5 years should be replaced promptly. The longer the tires are used, the higher the risk of tread deformation and blowouts. Tires are rubber products. When exposed to air for extended periods, especially in contact with air and sunlight, they gradually age, leading to a decline in performance and a sharp increase in the likelihood of blowouts. To extend the service life of tires, it is recommended to rotate the front and rear tires every 10,000-20,000 kilometers. Generally, front tires wear out more severely than rear tires. Rotating them ensures more even wear and prevents excessive wear on the front tires, which could render them unusable. When rotating the tires, it is also advisable to perform a four-wheel alignment and tire dynamic balancing. This helps prevent uneven tire wear that may necessitate premature replacement. Four-wheel alignment adjusts the suspension parameters to ensure the wheels are aligned straight forward, while dynamic balancing uses counterweights to ensure the weight distribution of the entire wheel is balanced. Before driving, always check the tire pressure—neither too high nor too low. Generally, maintain it around 2.2-2.5 Bar. In winter, due to the effects of thermal contraction, tire pressure tends to drop as temperatures decrease. It is recommended to inflate the tires appropriately during colder months.
6
2
Share

Which year was the Haojue 125-2 old model produced?

The Haojue 125-2 old model was produced between July 2010 and July 2019. Below are some relevant introductions about motorcycle riding: Cooling before washing: Always let the hot engine cool down before washing. Suddenly rinsing the engine, exhaust pipe, and other components with cold water can damage the oil seals in various parts due to thermal expansion and contraction, leading to engine oil leakage. Many motorcycle enthusiasts experience slight engine oil leakage due to this reason. It can also cause the chrome plating at the connection between the exhaust pipe and the engine to peel off, oxidize, and rust. Wipe cleaning: It is best not to directly rinse areas such as the headlight, left and right handrails, ignition switch, exhaust pipe outlet (it's better to block it with something), horn, spark plug, air filter, and battery with water. These areas contain circuits, and getting them wet can cause short circuits or leakage, resulting in issues like non-functioning lights, unresponsive horn, failure to start, and weak performance. It is recommended to use a cloth for wiping. Drying with a cloth: After washing the motorcycle, the entire vehicle should be dried with a dry cloth, especially areas like the ignition switch, instrument panel, left and right handrails, spark plug, and fuel tank cap. Special attention should be paid to removing the spark plug cap and shaking it a few times to remove any water inside the sleeve, as it may affect ignition.
10
5
Share

What does abs001 mean?

ABS is an anti-lock braking system in vehicles. The following is a related introduction to the vehicle anti-lock braking system ABS: Function of ABS: ABS has a self-diagnostic function that can monitor the working condition of the system. Once a fault is detected that affects the normal operation of the system, it will automatically turn off the ABS, light up the ABS warning light, and send a warning signal to the driver. Role of ABS: The role of ABS is to control the braking force during heavy braking, allowing the vehicle to maintain steering capability even under heavy braking. If this warning light appears, the fault must be resolved by a professional before it can be eliminated.
13
5
Share

Is the difference between 95W and 95Y tires significant?

The preceding number indicates the load index, while the following letter denotes the speed rating. Here are the relevant details: W represents a designed maximum speed of 270 km/h. Y is designed for a speed of 300 km/h. Load index: The load index and maximum load capacity of each tire are molded on the sidewall. 95 corresponds to a maximum load capacity of 690 kg per tire. 95 indicates that the maximum load for a single tire is 690 kilograms. Regularly check tire pressure: Tire pressure is a crucial factor affecting tire lifespan. Avoid overinflation or underinflation; always inflate according to the vehicle's indicated tire pressure.
9
1
Share

How often should Evans Waterless Coolant be replaced?

Determining whether coolant has deteriorated is not simply a matter of observing color changes with the naked eye or estimating based on time. The correct method requires professional instrument measurement, which is generally available at authorized 4S shops or auto repair shops. Below are the relevant steps: Check for leaks: Open the cooled engine cover and first inspect the cooling system pipelines, joints, etc., for any signs of leakage, and clean the relevant parts. Drain and clean: Drain the existing water or water-based coolant from the radiator into a shallow basin or bucket, observing whether it is clear, transparent, and free of impurities. If it is generally acceptable, rinse the cooling system twice with clean water.
18
0
Share

Can ABS Cause Side Slip When Steering During Emergency Braking?

ABS does not cause side slip when steering during emergency braking. This is because ABS prevents the wheels from locking up during emergency braking, allowing the vehicle to maintain good directional stability even under hard braking. How ABS Works: During braking, ABS quickly determines the wheel lock-up status based on speed signals from each wheel speed sensor. It closes the normally open input solenoid valve for wheels that begin to lock, keeping the braking force constant. If the wheel continues to lock, the normally closed output solenoid valve opens, causing the braking pressure on that wheel to drop rapidly as it connects directly to the brake fluid reservoir, preventing complete wheel lock-up due to excessive braking force. This keeps the braking state at the optimal point (20% slip ratio S), achieving the best braking performance and maximum driving safety. Functions of ABS: Maximizes brake efficiency, reducing braking time and distance. Effectively prevents vehicle side slip and fishtailing during emergency braking, ensuring excellent driving stability. Allows steering during emergency braking, providing good steering control. Avoids severe friction between tires and the road surface, reducing tire wear.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.