How many days are highways free during National Day?

Which country does the Citroën brand belong to?

Citroën is the third largest automobile company in France, founded in 1915. Citroën's main models include the all-new C6 premium sedan, third-generation C5, all-new C4L, C4 C-Elysée, all-new Elysée, C3-XR, and imported models such as the all-new C4 Picasso. The Citroën logo is based on the double chevron design, featuring a metallic color scheme with more three-dimensional and rounded contours, exuding a modern aesthetic. Key milestones in Citroën's development are as follows: In 1919, Citroën launched the Type-A car, which was the first mass-produced car in Europe and the first car sold as a complete unit. In 1924, André Citroën, the founder of Citroën, established Citroën Limited, dedicated to automobile manufacturing. In 1982, Citroën delivered 150 CX models to the Guangzhou Dongfang Hotel, marking its entry into the Chinese market. In 2010, China's Changan Automobile Group and France's PSA Peugeot Citroën Group jointly announced the signing of a letter of intent to establish an automotive joint venture in China, with each party holding a 50% stake in the new company. Changan Automobile would become PSA's second joint venture in China, following Dongfeng Motor.

19

1

Share

What Causes the Haval H6 to Shake When Accelerating?

The Haval H6 shaking when accelerating can be attributed to the following 4 reasons: 1. Excessive wear of the inner CV joint in the half-shaft: Due to changes in the force application point, a certain angle is formed between the transmission and the half-shaft, resulting in a jerking sensation in the vehicle; 2. Degraded performance or use of inferior spark plugs: Both the ignition coil and spark plugs are wear-prone components. When the spark plugs' performance degrades or inferior spark plugs are used, it can lead to weak acceleration and shaking during acceleration; 3. Malfunction of sensors and circuits controlling idle speed: For example, when the idle switch fails to close, the ECU incorrectly determines that the engine is under partial load, leading to incorrect control of the air intake; 4. Excessive carbon buildup in the idle air passage and throttle valve: This causes changes in the intake cross-sectional area, leading to inaccurate control of the idle air passage. As a result, the amount of air entering the cylinder deviates from the normal value, causing the air-fuel mixture to be too rich or too lean, resulting in abnormal combustion and unstable engine idle speed.

18

2

Share

What are the reasons why the engine fault light stays on and cannot be turned off?

The reason why the engine fault light stays on may be due to poor gasoline quality, leading to incomplete combustion of the air-fuel mixture in the cylinder, which triggers the pollution light. Reasons for the engine light to come on: Carbon deposits in the intake tract and on the piston top can cause poor atomization, leading to incomplete combustion and triggering the pollution light. During cold starts, especially when the temperature drops sharply, the pollution light may come on due to the computer's temperature correction issue. However, once the temperature stabilizes at a certain level, the light will usually stabilize. If the engine has been driven for a long mileage, weakened spark plug performance can cause the pollution light to illuminate. Excessive carbon deposits can make ignition difficult, leading to reverse breakdown of the ignition coil, resulting in ignition failure and incomplete combustion, which triggers the pollution light. A distinct characteristic of this issue is severe and persistent engine shaking when the ignition coil fails. If the shaking is not persistent, the ignition coil can usually be ruled out. Solutions for when the engine fault light comes on: Use fuel additives to clean the entire fuel system. After cleaning the engine, switch to a higher-grade gasoline. Use high-quality fuel additives to improve the cleanliness level of the fuel. Replace the catalytic converter.

12

5

Share

How many points are deducted for crossing a solid line to change lanes, and how long does it take to check?

Crossing a solid line to change lanes results in a 3-point deduction. The violation captured by electronic surveillance typically takes 3 to 7 days to process, and the result can be checked after one week. Below is relevant information about crossing solid lines to change lanes and violation penalty inquiries: Violation Penalty Inquiry Time and Methods: If crossing a solid line to change lanes is captured by electronic surveillance, the result usually takes 3 to 7 days to process. You can check the violation record on your mobile phone. Regulations require data collection and organization to be reviewed within 10 days, and the results are uploaded online for inquiry within 3 days after review. If no violation is found after 15 days, it means there was no violation. If the violation system reviews the case, a violation record will appear because the machine lacks the ability to discern. A white solid line painted on a road section is used to separate motor vehicles and non-motor vehicles traveling in the same direction or to indicate the edge of a lane. When painted at an intersection, it can serve as a guide lane line or a stop line. Hazards of Crossing Solid Lines to Change Lanes: Vehicles at intersections cannot proceed normally, easily causing traffic congestion; left-turning vehicles crossing yellow lines do not slow down when entering the intersection. Once encountering danger, they cannot take emergency braking measures in time, which can easily lead to traffic accidents.

13

5

Share

Where is the amplifier located in the Porsche Cayenne?

In the right side interior of the trunk. Related information: Porsche Cayenne: The Porsche Cayenne is an SUV model. The Porsche Cayenne plug-in hybrid model Cayenne S E-Hybrid is equipped with green brake calipers and Michelin Latitude Sport low rolling resistance tires. Porsche Cayenne models: The Porsche Cayenne is specifically divided into five categories: Cayenne, Cayenne S, Cayenne Turbo, Cayenne Turbo S, and Cayenne GTS. Born from Porsche, a company renowned for producing sports cars, the Cayenne, despite being an SUV, inevitably carries many sports car characteristics. In Spanish, Cayenne means "pepper." And this Porsche-produced SUV, both externally and internally, indeed resembles a red pepper, attracting people's attention.

2

5

Share

When Will the Exclamation Mark Light Up?

There are five scenarios when an exclamation mark appears on the car dashboard: general faults, automatic transmission faults, braking system faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these five situations: General Faults: An exclamation mark inside a triangle indicates a fault in the car's general performance, components, or functions. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission fault or low transmission lubricant level. Transmission fluid should be replaced promptly. Braking System Fault: An exclamation mark inside a circle with parentheses represents a braking system warning, typically indicating a braking system malfunction or low brake fluid level. Immediate inspection of the braking system is required to avoid accidents. Abnormal Tire Pressure: An exclamation mark below a horizontal line inside parentheses is the tire pressure monitoring warning light, which illuminates when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.

8

5

Share

How many days are highways free during National Day?

Which country does the Citroën brand belong to?

What Causes the Haval H6 to Shake When Accelerating?

What are the reasons why the engine fault light stays on and cannot be turned off?

How many points are deducted for crossing a solid line to change lanes, and how long does it take to check?

Where is the amplifier located in the Porsche Cayenne?

When Will the Exclamation Mark Light Up?

What is the Volkswagen TAYRON car brand?

How often should the spark plugs of Golf 7 be replaced?

What is the grade of SP-grade engine oil?

What are the requirements for buying a Bentley car?