How many days after window tinting can you not roll down the windows?

1 Answers
DelWyatt
07/30/25 4:26am
You should not roll down the windows for 7 days after window tinting. Opening or closing the windows shortly after tinting may cause the film to shift, as it hasn't fully dried between the film and the glass. After tinting, park the car in a sunny area to facilitate moisture evaporation from the film. Avoid washing the car for three days to prevent water from getting under the film and causing it to peel off. The steps for vehicle window tinting are: 1. Ensure the working environment is clean and thoroughly clean both the inside and outside of the car windows; 2. Cut the tint film to the appropriate size according to the window dimensions; 3. Before application, spray some water on the glass and use a heat gun to shape the film; 4. After shaping, proceed with installation by spraying cleaning solution on the inner glass and using a long triangular plastic squeegee to remove water.
Was this review help?
8
2
Share
More Forum Discussions

How to Solve the Brake Noise Issue in Kia Sportage?

Noise is more likely to be caused by brake pad issues. Severe wear, metal particles, or improper installation could all lead to noise. Additionally, in winter, the rubber components of the brake suspension may harden due to low temperatures, causing noise that naturally disappears once the car warms up. Below are the possible causes of brake noise: If the noise is a low-pitched thud, it might be the sound of the ABS (Anti-lock Braking System) activating. After ruling out the ABS, consider whether the cold weather is causing the brake rubber pads to deform, leading to misalignment and noise. If the noise disappears after driving for a while, this is likely the case. However, there are many potential causes for brake noise during startup, most of which are related to brake pads. Severe wear or improper installation of brake pads could cause noise. Other possibilities include issues with the brake caliper, wear on the brake pad pins, or detachment of the brake pad spring clips, all of which could also result in noise.
8
0
Share

Is Original Car Paint Really That Important?

Original car factory paint is important. The differences between original factory paint and repainted paint are as follows: 1. The most obvious difference: Original factory paint is a high-temperature paint, baked at temperatures of at least 130 degrees Celsius, resulting in stronger adhesion of the coating; whereas the repair paint used for repainting is typically baked at around 80 degrees Celsius, with much poorer coating adhesion. 2. Original factory paint: Original factory paint consists of a primer, mid-coat, color coat, and clear coat. If the original primer is scratched off, it is completely impossible to repair this layer of original primer during repainting. This is because this primer layer is applied in the car factory's spray shop by immersing the entire car body in a paint pool and attaching it through cathodic electrodeposition, a process that cannot be replicated once the car leaves the factory. The primer applied during repainting is usually a phosphating-treated coating, which is incomparable to the original factory primer, and the adhesion process is vastly different.
13
0
Share

Can I Add Tap Water When the Windshield Washer Fluid Runs Out?

Windshield washer fluid cannot be replaced with tap water. Windshield washer fluid serves the following functions: 1. Cleaning properties: Windshield washer fluid is formulated with various surfactants and additives. Surfactants typically have wetting, penetrating, and solubilizing functions, thereby achieving cleaning and stain removal. 2. Antifreeze properties: The presence of alcohol and ethylene glycol significantly lowers the freezing point of the liquid, providing antifreeze effects and quickly dissolving frost. 3. Anti-fog properties: A single-molecule protective layer forms on the glass surface. This protective film prevents the formation of fog droplets, ensuring the windshield remains clear and transparent with unobstructed visibility. 4. Lubrication properties: Windshield washer fluid contains a high viscosity ethylene glycol, which provides lubrication, reducing friction between the wiper and the glass to prevent scratches.
12
5
Share

Can I join Ruqi Chuxing with my own car?

Ruqi Chuxing does not accept private vehicles. Related information about Ruqi Chuxing: 1. Vehicle models: Ruqi Chuxing operates its own fleet, all sourced from GAC Group, including various high-quality models such as GAC New Energy GE3-530, Aion-S, and GAC Toyota Levin Hybrid. 2. Driver recruitment requirements for Ruqi Chuxing: (1) Possession of a ride-hailing driver qualification certificate; (2) A C1 or higher driver's license with at least 3 years of driving experience; (3) No records of traffic crime, dangerous driving crime, drug use, drunk driving, or violent crime; no accumulation of 12 penalty points in any of the last three scoring cycles; (4) For those without a ride-hailing driver certificate, must have Guangzhou household registration or a Guangzhou residence permit; (5) Citizens who have not reached the national statutory retirement age, have at least junior high school education, and are in good health.
14
4
Share

What are the causes of air pollution inside a car?

Sources of air pollution inside a car mainly include the following: 1. The new car itself: The interior of a car is mainly composed of leather, fiber, and various engineering materials, and these materials require the use of harmful substances such as formaldehyde and benzene during production. 2. Car decorations: In the market, car decorations come in various types and materials, with varying quality, and even some 'unbranded' interiors are mixed in. 3. Car air conditioning: For example, when the engine is running, it produces carbon monoxide, gasoline volatiles, nitrogen oxides, etc. 4. Smoking inside the car: If the driver or passengers smoke, it will greatly increase the concentration of pollutants such as volatile organic compounds, carbon monoxide, and dust. 5. Car washing: When washing the car, if cleaning agents or dry cleaning agents are used inside the car and ventilation is not properly managed afterward, it may cause secondary pollution.
14
2
Share

Why does traffic congestion occur and what is the first car doing?

When traffic congestion occurs, it is mostly due to accidents ahead or the first car breaking down and being unable to move. Additionally, encountering road repairs or highway construction is also one of the major causes of traffic jams. Under normal driving conditions, even when encountering traffic lights, vehicles do not become excessively congested because the red light lasts at most a little over a minute. Normal traffic flow is not a problem, just slower. More details are as follows: 1. Main causes of highway congestion: Apart from congestion on city roads, highways can also experience traffic jams. Besides accidents or vehicle breakdowns involving the first car, highway construction can cause congestion. The first car must slow down for safety, leading to subsequent vehicles also slowing down, resulting in congestion. 2. Secondary causes of highway congestion: Highways have many ramps, and many vehicles must slow down when entering them. Therefore, when the first car slows down, the following cars also slow down, forcing high-speed vehicles to reduce speed and causing congestion.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.