How many days after failing the subject three test can you make another appointment?

1 Answers
EvaLee
07/28/25 5:19pm
If you fail the subject three test, you can generally make another appointment after ten days. Here are some precautions for the subject three test: 1. Check before getting in the car: Before the subject three test, you need to walk around the car for inspection. There are usually two sensors on the test car, one at the front and one at the back. When walking around the car, you need to pause briefly near the sensors to ensure they detect you. 2. Adjust before operating: Adjust the car's rearview mirrors and seat height, then confirm if they are suitable. When observing through the rearview mirror, make sure you can see the rear wheels. Fasten your seat belt and confirm the gear is in neutral before starting the engine.
Was this review help?
3
5
Share
More Forum Discussions

How to Turn on the Windshield Wipers?

To turn on the windshield wipers, push the lever upward, and the wipers will start working continuously. Release the lever, and it will automatically return to its original position, stopping the wipers. Windshield wipers are used to clear small amounts of water or debris from the front windshield. The switch is located on the right side of the steering wheel and is designed as a lever. The wipers help reduce the impact of rain on driving visibility. The letter meanings on the wiper control: 1. OFF means the front wipers are in the stopped state, which is the off position of the car wipers. Rotate to this position to turn them off; 2. LO stands for continuous operation. Pull the lever down one more notch, and the wipers will work automatically at a continuous rate; 3. INT stands for automatic intermittent operation. Pull the lever down one notch, and the wipers will start working automatically in an intermittent mode.
17
3
Share

Is it okay to drive at 80 km/h continuously on the highway?

It is not okay to drive at 80 km/h continuously on the highway, mainly depending on the speed limit of the driving lane. If you are in the left fast lane, the minimum speed is 100 km per hour. Maintaining a speed of 80 km per hour would violate the driving speed regulations, so you should drive according to the speed limit signs. According to relevant regulations, the speed should be maintained between 60 and 120 km per hour, and when driving on the ramp, the speed limit is 40 km per hour. When driving on the highway, be sure to turn on the turn signal in advance before overtaking or changing lanes, and pay attention to the exit signs. If you miss the exit, do not slow down, brake, or make a U-turn, as stopping or making a U-turn on the highway is illegal. Also, pay attention to the following distance. If the speed is above 100 km per hour, maintain a distance of 100 meters; if the speed is below 100 km per hour, maintain a distance of 50 meters.
3
4
Share

What is the normal position for the pressure gauge needle on a fire extinguisher?

The pressure gauge needle of a fire extinguisher is normal when it is in the green zone, with the pressure value typically between 1.2 to 1.5 MPa. When the needle points to the green zone, it indicates that the extinguisher is safe to use. If the needle points to the red zone, it means the pressure inside the cylinder is insufficient, rendering the extinguisher unusable and requiring replacement. When the needle points to the yellow zone, it indicates excessive pressure, which can be dangerous, and the extinguisher should be sent to a specialized agency for inspection and repair. If functional inspection reveals any issues with the fire extinguisher, it must be entrusted to a qualified maintenance unit for repairs, including replacing damaged parts, conducting a hydrostatic test on the cylinder, and refilling the extinguishing agent and propellant gas. The maintenance unit must strictly adhere to the fire extinguisher scrapping policy. Every five years and before each refill, the main pressure-bearing components of the fire extinguisher, such as the head and cylinder, must undergo a hydrostatic test. Only those that pass the test can continue to be used. After testing, the extinguisher should be promptly dried, and the inner wall should be inspected for any significant corrosion. If the hydrostatic test fails, the extinguisher must not be repaired using methods such as welding and should not be used.
8
1
Share

What is the displacement of 330tsi?

330tsi has a displacement of 1.8L, and 330tsi represents a TSI engine with 330 N·m of torque. In TSI, 'T' stands for Twincharger, which means turbocharger plus supercharger; 'S' stands for Stratified; and 'I' stands for Injection. It is a high-power, low-speed, high-torque engine. Generally, the larger the displacement, the more fuel it consumes. According to the standards in mainland China, car classifications by displacement are as follows: mini cars have a displacement below 1L; compact cars range from 1.0L to 1.6L; mid-size cars range from 1.6L to 2.5L; executive cars range from 2.5L to 4.0L; and luxury cars have a displacement above 4L.
13
3
Share

Which city does the license plate Chuan W belong to?

Chuan W license plate belongs to Liangshan Yi Autonomous Prefecture in Sichuan. The license plate codes for various regions in Sichuan are as follows: Chuan A is Chengdu, Chuan B is Mianyang, Chuan C is Zigong, Chuan D is Panzhihua, Chuan E is Luzhou, Chuan F is Deyang, Chuan H is Guangyuan, Chuan J is Suining, Chuan K is Neijiang, Chuan L is Leshan, Chuan M is Ziyang, Chuan Q is Yibin, Chuan R is Nanchong, Chuan S is Dazhou, Chuan T is Ya'an, Chuan U is Aba Tibetan and Qiang Autonomous Prefecture, Chuan V is Ganzi Tibetan Autonomous Prefecture, Chuan W is Liangshan Yi Autonomous Prefecture, Chuan X is Guang'an, Chuan Y is Bazhong, Chuan Z is Meishan. The first Chinese character on the license plate is the abbreviation of the province, and the first English letter following the Chinese character represents the prefecture-level city code where the vehicle is registered. Generally, it is assigned by the provincial vehicle management office based on the status of each prefecture-level city, with A being the provincial capital, B being the second-largest city, and so on.
2
3
Share

How to Solve the Airbag Light On?

Solutions for the airbag light being on: 1. First, determine if it is a false alarm. Sometimes, low battery voltage can trigger similar faults, and repair shops usually check this first. 2. Remove the car key, disconnect the negative terminal of the battery, wait for 5 to 10 minutes, and then check if the light is still on. If it turns off, it is a false alarm. If it remains on, a professional diagnostic tool can be used to clear the fault code. The airbag system is a passive safety protection system that, when used in conjunction with seat belts, provides effective collision protection for occupants. In a car collision, airbags can reduce head injuries by 25% and facial injuries by approximately 80%.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.