How many days after enrolling in a driving school can you make an appointment?

1 Answers
Guzman
07/30/25 6:36am
After successfully enrolling in a driving school, you can schedule an exam in about a week. Notes for online driving test appointment: 1. Note 1: Training must be completed to qualify for the driving test appointment. The traffic management department states that the student's exam permit must be valid, the training for the subject to be tested must be completed and the course must be concluded before an appointment can be made. Cheating on the exam will result in a one-year waiting period before another appointment can be made. The online system will automatically review the student's qualifications, and unqualified applications will be rejected. 2. Note 2: Before making an appointment, ensure that the required driving practice hours have been completed. Otherwise, during the online appointment process, if the comparison of identity information reveals insufficient practice hours, the appointment will be automatically canceled. 3. Note 3: Students must know in advance the appointment time for their driving school's group and schedule an online appointment 20 days before this time. After a successful appointment, promptly contact the driving school to pay fees and print the exam permit. Additionally, the number of online slots is calculated based on the exam capacity of each test center and the actual number of driving school vehicles, which may change monthly. Students should regularly check the official Weibo of the Vehicle Management Office for updates.
Was this review help?
5
2
Share
More Forum Discussions

Is the Replacement Subframe as Good as New?

After replacing the car's subframe, it can be as good as new, but only if you use genuine OEM parts. If aftermarket parts are used, the molds for these parts do not meet OEM standards, which may result in slight dimensional deviations. However, this is not the biggest issue. The main problem is that the material quality of aftermarket parts is inferior to that of OEM parts, often being thinner and less durable. Below are some driving precautions: 1. Check mirrors: Always use turn signals and slow down when turning or changing lanes. Before turning, always check the mirrors—left turns require checking the left mirror, right turns the right mirror, and both turns require checking the interior rearview mirror. 2. Avoid fixating on the front of the car: When driving on clear roads, look straight ahead about 100 meters and avoid staring at the immediate front of the car. 3. Clutch control: Generally, when decelerating above 40 km/h, there's no need to press the clutch immediately; wait until the speed drops to around 20 km/h before pressing it. 4. Steering: Turn the wheel slowly at high speeds and quickly at low speeds.
12
5
Share

How Many Types of Off-Road Vehicles Are There?

There are three types of off-road vehicles. Those with high load capacity are called heavy-duty off-road vehicles; those with small load capacity are called light off-road vehicles; and those between light and heavy are called medium off-road vehicles. Off-road vehicles ORV (Off-Road Vehicle) are specially designed for off-road use, mainly referring to vehicles that can operate on rough terrain. The following modifications do not require registration: 1. Body stickers: As long as the stickers do not exceed 30% of the body area, they can be used on the road normally without registration. If they exceed 30%, penalties will be imposed, and the original appearance must be restored. However, mirror-reflective paper cannot be used, and no film or paper should cover the lamp covers. 2. Anti-collision devices: Anti-collision devices refer to items like protective bumpers on off-road vehicles. As long as they are installed safely and stably, no registration is required. 3. Wheel rims: If the original wheel rim specifications (size, diameter, width) are not changed, no registration is needed. 4. Xenon lights: If the high-end version comes with xenon lights, they can be modified, but a lens must be installed.
6
4
Share

What is the maintenance interval for BMW vehicles?

BMW's maintenance schedule recommends the first service at 5,000 kilometers, followed by regular maintenance every 10,000 kilometers. Engine oil and oil filter require replacement at every service interval. Air filters, cabin air filters, and fuel filters should be replaced every 20,000 kilometers, while brake fluid replacement is recommended every 40,000 kilometers. Below are the basic maintenance items: 1. Engine oil and filter replacement: Improves oil quality for smoother power delivery and extends engine lifespan. 2. Fuel filter: Removes impurities and water from fuel to ensure optimal engine performance. 3. Spark plugs: Prevents ignition difficulties and engine power loss. 4. Brake fluid: Absorbs moisture from air to enhance braking performance and ensure driving safety. 5. Brake pads: Worn brake pads reduce braking efficiency; replacement ensures stable vehicle control. 6. Air and cabin air filters: Improve intake air quality for efficient air distribution; filters dust and unpleasant odors from the air.
17
0
Share

What does 'strt' mean on a car?

strt on a car refers to the second-gear start function switch. When this switch is turned on, the automatic transmission does not start from first gear but from second gear. Its main function is to be used on slippery roads to prevent the high torque of first-gear starts from causing wheel slippage, similar to the TRC (Traction Control) function. Below is an introduction to the gears of an automatic transmission car: 1. L gear: Low gear, which limits speed. When engaged while going uphill, it maintains a high RPM and low gear state. 2. S gear: Sport mode, where the transmission can shift freely, but the shift timing is delayed, keeping the engine at high RPM for a longer time, allowing the car to move at low gear and high RPM for an extended period. 3. D gear: Drive gear, used for forward movement of the car. 4. N gear: Neutral gear, used during brief stops. 5. P gear: Park gear, used when parking; placing the gear in P stops the car's braking, preventing it from rolling. 6. R gear: Reverse gear, used when reversing. However, R gear can only be engaged when the vehicle is completely stopped; engaging R while the car is slowly moving forward can cause serious damage to the car's transmission.
17
1
Share

What is the valve clearance of the Yuchai 6M four-valve engine?

The valve clearance of the Yuchai 6M four-valve engine is 0.25-0.30 for the intake valves and 0.30-0.35 for the exhaust valves. If there is no clearance or the clearance is too small between the valves and their transmission components in the cold state, the thermal expansion of the valves and their transmission components in the hot state will inevitably cause the valves to close improperly, resulting in air leakage during the compression and power strokes of the engine, thereby reducing power output. In severe cases, it may even be difficult to start the engine. Below is an introduction to car maintenance: 1. Introduction to car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Scope of car maintenance: Modern car maintenance mainly includes the maintenance of the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. Purpose of car maintenance: The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life.
19
2
Share

Where is the Transmission Oil Filter Located?

The transmission oil filter is located inside the transmission. Below is additional information: 1. Function of transmission oil: Transmission oil is a lubricant that keeps the gear shifting system clean, ensuring proper transmission operation and extending the lifespan of the transmission components. 2. Automatic transmissions on the market: Most transmission oils can be used with automatic transmissions available on the market. In fact, each automatic transmission design has different technical requirements. Even the same model of transmission configured in different vehicle models may vary in torque, weight, speed, and structure. Therefore, the original manufacturer specifies its own dedicated transmission oil. Different transmission oils are one of the factors affecting shift quality. 3. The fundamental difference: lies in the friction system. HFM-ATF has finer oil molecules and superior shear resistance. Under semi-clutch conditions or at the moment of engagement, the oil film on the friction material surface creates an effective suspension state, preventing slippage and cushioning powerful instantaneous impacts, resulting in smoother engagement and shifting. Additionally, the fine oil molecules significantly reduce valve sticking, ensuring smoother valve body operation.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.