How Many Days After Booking the Subject 2 Test Will the Exam Take Place?

1 Answers
Matt
07/30/25 7:14am
After successfully booking the Subject 2 test, the exam can be scheduled no earlier than 10 days after obtaining the study driving permit. Here are the relevant details: 1. Regulations: According to Article 40 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," for first-time applicants or those applying to add a permitted vehicle type, the following rules apply when booking the Subject 2 test: Applicants for small cars, small automatic transmission cars, low-speed trucks, three-wheeled cars, small automatic transmission passenger cars for the disabled, wheeled self-propelled machinery, trolleybuses, or tram permitted vehicle types can schedule the exam no earlier than 10 days after obtaining the study driving permit. Applicants for large buses, tractors, city buses, medium-sized buses, or large truck permitted vehicle types can schedule the exam no earlier than 20 days after obtaining the study driving permit. 2. Notes: In areas where conditions permit, applicants can simultaneously book the Subject 2 and Subject 3 road driving skill tests. If the booking is successful, the exams can be taken consecutively. After passing both the Subject 2 and Subject 3 road driving skill tests, applicants can take the Subject 3 safe and civilized driving knowledge test on the same day.
Was this review help?
17
1
Share
More Forum Discussions

What does the service light on a Citroen C4L mean?

The service light on a Citroen C4L indicates that the vehicle requires maintenance. Below are the relevant details: 1. Introduction: The service light is designed by the manufacturer to remind the owner to perform maintenance at specified intervals. After maintenance is completed, the service reminder light needs to be reset following a specific procedure to turn it off. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the vehicle, also known as car servicing. 2. Content: Modern car maintenance mainly includes the maintenance of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc.
9
5
Share

What are the reasons for the ABS light coming on in an Iveco?

There are various states of the ABS light being on, and the causes and solutions differ depending on the state. The details are as follows: State 1: The ABS warning light stays on continuously (most common). Cause 1: The ABS wheel speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle's speed and the wheel's slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the dirt off the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal due to loose connections in the system wiring or poor contact in the ABS relay, leading to system failure. Solution: Check the wiring connections and reconnect any loose parts. State 2: The ABS warning light intermittently turns on but goes off when accelerating. Cause: When multiple vehicle electrical components are in use, the battery voltage drops below 10.5V. As the engine speed increases, the voltage rises, and the ABS light turns off. Another cause is insufficient power supply voltage to the ABS system, such as poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: The ABS warning light stays on after the engine starts and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; poor wiring connection in the ABS hydraulic valve body; ABS computer malfunction. Solution: Loosen the grounding screw of the hydraulic valve body, then retighten it, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. State 4: The ABS warning light comes on during high-speed driving. Cause: At high speeds, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: The ABS warning light intermittently turns on. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: Start the engine, press the brake pedal, push the brake switch linkage down fully with a finger, then release the brake pedal to complete self-positioning; replace the brake light switch if necessary. If the ABS warning light is on, it is recommended not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, making it difficult for the driver to slow down or adjust the vehicle's trajectory, posing significant safety risks.
17
1
Share

What are the causes of automatic transmission failure in the Chevrolet Sail?

Causes of transmission failure in the Sail include: solenoid valve failure, mechanical failure, control unit failure, clutch failure, and computer failure. The details and corresponding solutions are as follows: 1. Solenoid Valve Failure Inside the small solenoid valve, there is a valve core. The valve core operates via electrical current, performing rapid piston-like movements. However, if the valve core becomes stuck or damaged, it can cause unstable oil pressure inside the transmission, leading to jerking, impact, and other issues. Use diagnostic tools to check whether the solenoid valve is damaged. If problems are found, replace the solenoid valve with a new one. 2. Mechanical Failure Internal mechanical wear in the transmission can also lead to transmission failure. Issues such as damaged shift forks, worn bearings, and other mechanical component failures are part of transmission mechanical failure. If the shift fork is damaged or broken, there will be mechanical wear inside the transmission, manifesting as abnormal noises, failure to shift up, shaking, or impact. Replacing the damaged parts and adjusting the transmission can easily resolve mechanical failures. 3. Control Unit Failure Control unit failure is also one of the common issues. Internal components like accumulators, slave cylinders, or valve body damage can cause control unit failure. Replacing the damaged parts of the control unit can resolve the issue. 4. Clutch Failure Clutch wear in the EMT transmission is a common problem. The reason is simple: this EMT transmission is essentially a manual transmission with an added actuator, turning it into an automated manual transmission. The advantage is that it significantly reduces manufacturing costs. In manual transmissions, the clutch tends to fail after the vehicle reaches a certain mileage. If this type of failure occurs, inspect and confirm the issue before replacing the clutch. 5. Computer Failure This transmission uses an external computer. Computer failures are rare, but they do occur occasionally. Typically, computer failures are caused by issues with the computer board or sensors. Replacing the sensors or computer board can resolve the problem. Computer failures are usually sporadic. Methods to address Chevrolet Sail transmission failure: Inspect the internal clutch, actuator, shift fork, and solenoid valve for damage. Repair or replace the clutch, actuator, shift fork, and solenoid valve to completely resolve the transmission failure issue in the Chevrolet Sail.
7
4
Share

What causes a Chevrolet steering wheel to suddenly become immovable?

Chevrolet steering wheel suddenly becomes immovable mainly due to air not being completely expelled from the steering system after fluid leakage. Below are the relevant details:1. Overview: This situation occurs because air remains in the steering system after fluid leakage. If the power steering pump operates for a long time without sufficient oil, it can lead to severe wear, reducing the performance of the steering system. Repairing oil leaks in the steering pump can be resolved by replacing sealing rings and oil seals, or replacing the entire assembly if necessary.2. Additional Notes: Cars equipped with vacuum-assisted steering will not experience immovable steering wheels after the engine starts unless the power steering pump is damaged. The phenomenon of the steering wheel suddenly becoming very tight and immovable is more common in vehicles equipped with electronic steering systems. The power steering system uses electronic assistance, and repeatedly turning the steering wheel while stationary or at low speeds places an extremely high load on the power steering system, easily causing the steering gear to overheat and enter protection mode, resulting in heavy steering. It can return to normal after cooling down, which is a normal phenomenon.
15
3
Share

What does it mean when the off light in the Sylphy is illuminated in yellow?

The off light in the Sylphy illuminating yellow indicates that the vehicle's Electronic Stability Program (ESP) is either turned off or malfunctioning. Below are the relevant details: 1. Overview: The off light in a car primarily refers to ESP-OFF. ESP stands for Electronic Stability Program, which is an active safety feature designed to prevent the vehicle from skidding or losing control. If the ESP-OFF light is illuminated, it means the vehicle's stability control system is either deactivated or experiencing a malfunction. 2. Additional Information: In vehicles equipped with ESP, the system is enabled by default upon starting the car. The ESP-OFF function is rarely used during normal driving and is only necessary to activate under specific circumstances. Therefore, when the ESP-OFF indicator light is on, it signifies that this function is not active and should be turned on promptly. In case of a malfunction, immediate repairs are necessary.
5
4
Share

What are the reasons for the Golf's reversing camera not displaying?

Golf's reversing camera not displaying reasons are as follows: 1. Poor line contact: It is very likely due to poor line contact. It is necessary to promptly check the connection between the lines and the vehicle's installation to see if there is any loose connection. If there is, simply reconnect the loose part properly. 2. Line aging: It could also be due to aging of the video power cable. You can try replacing it with a new power cable. Additionally, prolonged use of the reversing camera may lead to poor chip photosensitivity, resulting in a snowy screen phenomenon, or in severe cases, the so-called black screen phenomenon.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.