How many days after booking can you take the Subject 2 test?

How Long Can Motor Oil Be Stored After Opening?

The shelf life of opened motor oil is categorized as follows: 1. Motor oil remaining after car maintenance but already opened has a shelf life of about one year. 2. Motor oil poured into the engine has a shelf life of about six months. 3. Unopened motor oil has a shelf life of approximately five years. Relevant information is introduced below: 1. The storage environment for motor oil bottles must be clean and dry, ensuring no exposure to sunlight to prevent oxidation reactions in the oil. After opening, the motor oil must be sealed immediately. After car maintenance is completed, a clean plastic film should be placed over the bottle mouth, and the motor oil cap should be tightened. 2. Motor oil, also known as engine lubricant, serves to lubricate and reduce friction in the engine, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption and buffering.

9

3

Share

How to Remove Adhesive Residue from a Car?

Methods for removing adhesive residue from a car are as follows: 1. Essential balm is an organic solvent that can effectively remove stubborn adhesive residues. Apply the balm to the adhesive marks, wait until it fully penetrates, then wipe vigorously with a towel to remove the residue without leaving any traces. 2. Purchase a specialized adhesive remover for a simple and convenient solution that cleans off tape marks thoroughly. 3. Alcohol is relatively safe and won't harm the car body. However, if removing residue from a windshield with a sun film, avoid spraying alcohol directly as it may damage the film; instead, use a towel dipped in a small amount to wipe it off. 4. You can also ask the car wash staff to help remove the residue during a car wash.

11

5

Share

When will the new National Standard 6 for vehicles be implemented?

National Standard 6 for vehicles will be implemented starting from July 1, 2023. The standard is divided into two phases, a and b. As early as July 1, 2019, all light-duty vehicles sold and registered must comply with National Standard 6. The requirements for the two phases are as follows: 1. Phase a requirement: By no later than July 1, 2023, all light-duty vehicles sold and registered must comply with National Standard 6. 2. Phase b limit requirement: National Standard 6a can only be considered a transitional phase, while National Standard 6b is the true National Standard 6 phase. Note: Currently, some regions have implemented the National Standard 6 emission standards ahead of schedule. For example, Guangzhou implemented the National Standard 6 emission standards for light-duty gasoline and diesel vehicles starting from March 1, 2019; Shenzhen required light-duty diesel vehicles to comply with National Standard 6 starting from July 1, 2018, and light-duty gasoline vehicles to comply with National Standard 6 starting from July 1, 2019.

11

5

Share

What are the methods to eliminate formaldehyde in car interiors?

Methods to remove formaldehyde in the car include: 1. Develop the habit of driving with windows slightly open to maintain fresh air circulation and accelerate the release of formaldehyde. 2. Use activated carbon to absorb formaldehyde. 3. Use an air compressor to atomize and spray solvents inside the car. 4. Use water-based disinfectants in the car. 5. Visit a car maintenance center for negative ion deodorization services. Methods to detect formaldehyde include: 1. Using a formaldehyde detector to accurately measure formaldehyde levels. 2. Using a formaldehyde self-test kit for an economical and convenient option. 3. If you detect a pungent odor in the car, harmful gases including formaldehyde may be present.

8

4

Share

Why is the paint surface not smooth like matte?

If the car paint is not smooth and has a matte surface, it may be due to an oxidation layer on the car body. Polishing and glaze sealing can be performed. Relevant information is introduced as follows: If an oxidation layer appears on the car paint, polishing is required, and the effect will be better after polishing followed by glaze sealing. However, if it is a new car, polishing is not recommended, and coating is better than glaze sealing. Polishing is a method to remove scratches and rough areas on the car paint surface using polishing wax and a polishing machine. Polishing can grind off the aging paint film, allowing a new paint film to form and restore the paint's brilliance. Waxing or glaze sealing after polishing can achieve more ideal results.

15

1

Share

Where Should a Fire Extinguisher Be Placed in a Car?

Fire extinguishers in a car can be placed in the following locations: 1. Inside the glove compartment. 2. Next to the seat. 3. In the trunk. The storage environment temperature for car fire extinguishers should be within the range of -10 to 45 degrees Celsius, and the placement location should be kept dry and ventilated to prevent the extinguisher from getting damp and corroding. Precautions for using a fire extinguisher include: 1. Do not cover the extinguisher with objects; it should be easily accessible for quick retrieval. 2. Fire extinguishers are only suitable for putting out initial fires. 3. Use the extinguisher correctly. 4. Check the extinguisher's pressure once a month. 5. Fire extinguishers have an expiration date; they should be configured and replaced as required.

17

5

Share

How many days after booking can you take the Subject 2 test?

How Long Can Motor Oil Be Stored After Opening?

How to Remove Adhesive Residue from a Car?

When will the new National Standard 6 for vehicles be implemented?

What are the methods to eliminate formaldehyde in car interiors?

Why is the paint surface not smooth like matte?

Where Should a Fire Extinguisher Be Placed in a Car?

What age of children need a safety seat?

What is the tire size of the Honda Avancier?

What Causes Brake Noise During Startup?

Which consumes more fuel, 1.5T or 2.0T in cars?