How many cylinders does the Mercedes-Benz SLS engine have?

1 Answers
StNevaeh
07/30/25 7:37am
Mercedes-Benz SLS is equipped with a 6.2-liter V-8 engine from Mercedes, paired with a new 7-speed dual-clutch transmission, delivering a maximum output power of 420 kW and a peak torque of 630 Newton-meters. Common cylinder counts for automotive engines: Automobile engines commonly have 3, 4, 5, 6, 8, 10, or 12 cylinders. Engine cylinder count representation: Engines below 1 liter displacement typically use 3 cylinders (e.g., Xiali 7100), 1-2.5 liters generally use 4-cylinder engines, around 3 liters usually have 6 cylinders, approximately 4 liters have 8 cylinders, and above 5.5 liters use 12-cylinder engines.
Was this review help?
16
2
Share
More Forum Discussions

What is the function of active grille shutters?

About the function of active grille shutters, the relevant introduction is as follows: 1. Maintain car temperature: When the car is just started, the engine temperature is relatively low, especially in cold winter. At this time, the active grille shutters will automatically close to prevent external air from entering the engine, filling the car interior with warm air, thereby allowing the engine to reach the optimal working temperature in the shortest time. When the engine temperature reaches a certain level, the grille shutters will open to prevent the engine from overheating, thus maintaining the optimal working temperature. 2. Reduce wind resistance and improve fuel economy: If the grille shutters remain open, it will increase the car's wind resistance, thereby increasing the driving burden and fuel consumption. The automatic grille shutters will open and close appropriately based on vehicle speed and engine temperature, reducing wind resistance and improving the car's stability. Additionally, with reduced burden and the engine maintaining optimal temperature, fuel can burn more completely, thereby reducing fuel consumption.
19
0
Share

What is a Forthing car?

Forthing is the car emblem of Dongfeng Fengxing (also known as Dongfeng Forthing), featuring a distinctive rear design with the English logo "FORTHING" displayed above. Below is an extended introduction: Brand Introduction: Fengxing is a sub-brand of Dongfeng Liuzhou Motor Co., Ltd. The Dongfeng Group owns numerous sub-brands, such as Dongfeng Fengshen, Dongfeng Venucia, and Dongfeng Fengxing. Among them, Dongfeng Fengxing has developed rapidly in recent years and currently offers the Jingyi series and multiple SUV models like the Fengxing SX6. Last month, the Dongfeng Fengxing T5 Evo was officially launched. Exterior: As a compact SUV, the Dongfeng Fengxing T5 Evo measures 4565mm in length, 1860mm in width, and 1690mm in height, with a wheelbase of 2715mm. The over 2.7-meter wheelbase provides a comfortable interior space for passengers.
14
0
Share

Can a car without the green book be sold?

A car without the green book cannot be sold. The green book of a motor vehicle is the legal proof of its legitimacy. Without the green book, the vehicle is considered illegal, and the transfer of ownership cannot be processed. Below is relevant information about the green book: Replacement of the green book: When replacing the green book, it will show the mortgage status. The mortgage record is stored in the system of the vehicle management office. After the user applies for a new green book, the mortgage record will also be reissued. Moreover, if the owner has already mortgaged the green book to apply for a loan, the green book cannot be replaced during the loan period. Only after the loan is fully repaid and the green book is unfortunately lost can a replacement be applied for. The replacement process takes within 15 days. Function of the green book: The motor vehicle registration certificate is kept by the vehicle owner and does not need to be carried with the vehicle. However, when handling any vehicle registration procedures such as transfer of ownership or change of registration, the motor vehicle registration certificate must be presented, and relevant vehicle information will be recorded in the certificate.
11
0
Share

How to Replace Coolant in Lavida?

Lavida coolant replacement method is as follows: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a focus on the five-way water pipe. The five-way pipe is named for its five connections to various parts, and the coolant is distributed to different sections of the car after flowing through it. If there is any coolant leakage in this part, replace the water pipe or re-secure the connections as needed. Drain the old coolant and then flush the liquid channels with clean water. Add clean water to the coolant reservoir and continue filling it to allow water to flow continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir will have a faint pink color. Keep adding clean water until the outflow is clear. Note: Remember to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose to allow it to flow quickly into the radiator. Then, add another container of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the coolant level will drop. Top it up again until it reaches the "MAXT" mark on the reservoir.
19
1
Share

How to Remove Fog on the Outside of the Windshield?

Here are the methods to deal with fog on the outside of the car's front windshield: 1. When there are water droplets on the outside glass. Adjust the air conditioning temperature slightly higher, set the vents to avoid blowing directly on the glass, and use the windshield wipers with washer fluid to promptly address the issue of water droplets forming outside. 2. When fog forms inside the car. If this occurs during summer after rain, immediately turn on the air conditioning in cooling mode and adjust it to blow air onto the front windshield to quickly disperse the fog. If fog forms inside the car during winter when temperatures are generally lower and the cooling effect of the air conditioning is slower, it is best to immediately open the windows to resolve the fog more quickly. Using the air conditioning in heating mode can also remove fog, but this method is slower and may cause more fog to form on the side windows, affecting driving safety and is not recommended. Additional information: 1. When the temperature inside the car is low and the outside temperature is high, you may notice water droplets forming on the outside glass where the air conditioning blows. This is due to moisture in the air condensing into droplets when it meets the cold surface, similar to how condensation forms on air conditioning units. 2. When the outside is cold and the inside is warm, fog forms very quickly, which is a situation drivers fear the most. This is also caused by moisture in the car's air condensing into small droplets when it meets the cold glass.
17
5
Share

What Are the Reasons for the Car's Electric Fan Not Spinning?

Car air conditioning fan not spinning reasons are poor contact of the air conditioning switch, damage to the fan motor coil, detachment of the fan bearing, and the water temperature not reaching the required level. The solutions for a car fan not spinning are: Poor contact of the air conditioning switch: If the air conditioning switch has poor contact, it cannot control the normal startup of the car's air conditioning, leading to the fan not spinning. In this case, replace the air conditioning control switch and check for any short circuits in the connecting wires. Damage to the fan motor coil: If the fan motor coil is damaged, the fan cannot receive power normally, causing it not to spin. In this situation, inspect and repair the fan motor coil, or replace it if necessary. Detachment of the fan bearing: When the fan bearing is detached, turning on the air conditioning will only cause the bearing to spin idly without the fan turning properly. In this case, reinstall and secure the fan bearing. Water temperature not reaching the required level: Most car fans operate using electronic temperature control technology, and the air conditioning system can only function properly when the water temperature reaches the standard. If the air conditioning fan does not spin due to the water temperature not meeting the standard, this is a normal phenomenon. Simply ensure the water temperature reaches the normal standard.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.