How many cylinders does the Lynk & Co 03 2.0t engine have?

1 Answers
StJasper
07/24/25 10:48pm
The Lynk & Co 03 2.0t is equipped with a four-cylinder engine. The function of the engine is to convert the thermal energy of gasoline into mechanical energy by burning and expanding the gas in a sealed cylinder, thereby pushing the piston to perform work. Taking the 2021 Lynk & Co 03 2.0t as an example, its body structure is a four-door, five-seater sedan with body dimensions of 4657mm in length, 1840mm in width, and 1472mm in height, with a wheelbase of 2730mm and a curb weight of 1570kg. The 2021 Lynk & Co 03 2.0t features a MacPherson independent front suspension and a multi-link independent rear suspension. It is powered by a turbocharged engine with a maximum horsepower of 190ps, a maximum power of 140kw, and a maximum torque of 300nm, paired with a 6-speed automatic manual transmission.
Was this review help?
13
2
Share
More Forum Discussions

What Causes Abnormal Noises After Starting the Car?

Abnormal noises after starting the car are usually the sound of the fuel pump working. Below are the reasons for abnormal noises when starting a car: 1. Working Principle: After the vehicle starts, the starter gear may engage with the engine flywheel ring gear. The starter gear is adjusted by an electromagnetic coil, which may produce a buzzing sound during operation. These sounds are generally normal. 2. After Starting the Car: The abnormal noise is the sound of the fuel pump working. Once powered, the fuel pump starts operating to prepare for engine startup. If the fuel pump does not work after power is applied, the fuel injection system will not have sufficient injection pressure during engine startup, leading to difficulties in starting the engine.
11
1
Share

How to Adjust the Headlight Height on the Encore?

The Encore adjusts the headlight height using a height control knob. The different height settings are as follows: 1. Setting 0 is the lowest height position, with a shorter illumination distance. 2. Setting 1 is slightly higher than setting 0, increasing the illumination distance. 3. Setting 2 is a medium height position, with a medium illumination distance. 4. Setting 3 is the highest position, offering the farthest illumination distance. 5. The high/low beam switch is adjusted using the light control lever. Additional information about the Encore: 1. The Encore is a product developed by General Motors on the new-generation global small car platform Gamma II. 2. Its exterior design features strong family styling, resembling a scaled-down version of the Enclave and GL8 overall, with a more compact size compared to typical urban SUVs. 3. The Encore's four-wheel-drive model is equipped with the AWD intelligent four-wheel-drive system, centered around an electromagnetic multi-plate clutch. It boasts a compact structure, rapid response, and energy-saving characteristics. The system can comprehensively assess the vehicle's driving conditions and switch from front-wheel drive to four-wheel drive within 0.2 seconds. The front/rear axle torque distribution can be continuously controlled between 100/0 and 50/50, providing excellent driving capability on slippery, icy, or snowy roads, as well as off-road capability in muddy or rough conditions.
3
5
Share

How to Estimate Road Distance for Beginner Drivers

Beginner drivers can estimate road distance with some tips: 1. How to judge the distance of the rear vehicle when overtaking or changing lanes: The relationship between the car image size in the mirror and its distance is as follows: The car image occupies the entire rearview mirror - the distance is 3m; occupies 2/3 of the mirror - 5m; occupies 1/2 - 9m; occupies 1/3 - 12m. 2. How to judge the distance of the front vehicle in traffic jams: A following distance of about 2 meters is generally appropriate. Too close may cause rear-end collisions, while too far may allow other vehicles to cut in. Normally, the distance can be judged based on the driver's view of the front vehicle's rear bumper and tires from the outline of their own car's front.
12
5
Share

What are the reasons for the Audi A6 starter not responding?

Audi A6 starter not responding may have the following reasons: 1. Insufficient battery voltage, the starter cannot start the engine. 2. The starter itself is damaged. The general service life of a starter is around 100,000 kilometers. If used for too long, the carbon brushes are prone to damage, which can also cause the starter to fail to start. 3. The fuel pump is damaged, leading to no fuel supply. 4. The car cannot be started if the gear is in D (Drive) position. This is a self-protection mechanism of the car to prevent it from lurching forward after ignition. 5. The engine speed sensor (crankshaft position sensor) is damaged, causing the vehicle to have no high-voltage spark, making it impossible to start normally.
1
3
Share

What is the tire size specification for the Volkswagen Tiguan?

From the detailed configuration table of the Tiguan, it can be seen that the Urban and Trendline models use 215/65-R16 tires for both front and rear, while the Comfortline, Highline, R-Line, and Flagship models use 235/55-R17. More details about the Tiguan are as follows: 1. Exterior: The newly launched generation of the Tiguan is named Tiguan L. Compared to the older model, the new version has a more sporty appearance, offering consumers a fresh visual experience. 2. Body Dimensions: The new Tiguan has increased dimensions compared to the older model, with a length increase of 206mm, a width increase of 30mm, and a wheelbase increase of 107mm. The new model performs better in terms of space. 3. Powertrain: The Volkswagen Tiguan L is equipped with 1.4T and 2.0T high/low power engines. The 1.4T engine has a maximum power of 110kw and a maximum torque of 250 Nm. The 2.0T low-power engine has a maximum power of 137kw and a maximum torque of 320 Nm, while the 2.0T high-power engine has a maximum power of 162kw and a maximum torque of 350 Nm. In terms of the transmission system, the 1.4T model is matched with a 6-speed dual-clutch transmission, and the 2.0T high/low power engines are matched with a 7-speed dual-clutch transmission.
13
4
Share

Does a 2013 car need to go through the inspection line in 2019?

A 2013 car needs to go through the inspection line during the annual inspection in 2019. Here are some recommendations before the annual inspection: 1. Inspection items: Check the lighting system, braking system, exhaust emissions, chassis, and appearance. If any of these items fail the inspection, the annual inspection will not pass. 2. Repair before inspection: Fix any faults in advance to avoid unnecessary trouble. 3. Replace the old catalytic converter: Older cars often fail the exhaust emission test because certain sensors are damaged or the catalytic converter is no longer effective. A catalytic converter can lose effectiveness over time, causing the car to fail the exhaust emission test. 4. Maintenance before inspection: If the car hasn't been serviced for a long time, a pre-inspection maintenance check can help it pass the annual inspection smoothly. Regular maintenance is essential for daily car use.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.