How many cylinders does the Lavida engine have?

1 Answers
VanMaverick
07/29/25 8:46pm
The Lavida is equipped with two four-cylinder engines: a 1.5L and a 1.4T. The 1.5L engine has a maximum power of 83KW and a maximum torque of 145NM, with the maximum power achieved at 6000 rpm and the maximum torque at 3900 rpm. The 1.4T engine delivers a maximum power of 110KW and a maximum torque of 250NM, with the maximum power achieved at 5000 rpm and the maximum torque between 1750 to 3000 rpm. The Lavida's body dimensions are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm.
Was this review help?
16
5
Share
More Forum Discussions

What to Do If You Lose Your Santana Car Key?

The solutions for losing your Santana car key are: 1. Use the spare key; 2. Contact a professional locksmith company; 3. Visit a 4S shop to configure a new key; 4. Replace the entire car lock. Taking the Santana 2021 model as an example, its body dimensions are: length 4475mm, width 1706mm, height 1469mm, wheelbase 2603mm, fuel tank capacity 52.8l, and body structure is a 4-door 5-seater sedan. The Santana 2021 model is equipped with a 1.5l naturally aspirated engine, with a maximum power of 82kw and a maximum torque of 145nm, matched with a 5-speed manual transmission.
10
0
Share

Is the Mazda CX4 a domestic model?

Mazda CX4 is not a domestic model, but a joint venture car. It is a niche joint venture automobile brand model under Mazda, produced by FAW Mazda in Changchun. The Mazda CX4 is positioned as a compact SUV, with body dimensions of 4633mm in length, 1840mm in width, and 1535mm in height, and a wheelbase of 2700mm. The Mazda CX4 is equipped with Skyactiv-G 2.0L and 2.5L naturally aspirated engines, featuring water-cooled inline 4-cylinder DOHC 16-valve configuration, paired with a six-speed manual or six-speed automatic transmission. It also comes with the Mazda Connect infotainment system and the i-ACTIVSENSE Mazda Intelligent Safety Assist System.
2
2
Share

What Are the Consequences of Water Entering the Engine?

Engine water ingress can lead to the following consequences: 1. Engine connecting rod deformation, resulting in shortened piston stroke and insufficient gas compression; 2. Piston rings losing elasticity or failing to seal, causing air leakage and compressed gas entering the crankcase; 3. Intake and exhaust valves failing to seal properly when closed, leading to compressed gas leakage into the intake and exhaust manifolds. Precautions after engine water ingress include: 1. Do not start the engine immediately; tow the vehicle to a safe location; 2. Tow the car to a repair shop for servicing; 3. Replace the engine oil and clean related engine components. Engine maintenance methods include: 1. Use high-quality engine oil; 2. Use qualified coolant; 3. Regularly clean the radiator scale; 4. Periodically remove carbon deposits from the car; 5. Replace the three filters on time; 6. Maintain reasonable engine speed.
16
4
Share

Can Run-Flat Tires Still Be Driven When Flat?

Run-flat tires can still be driven when flat. Relevant information is as follows: 1. Driving: Even if the air pressure in the tire is completely lost, you can still continue driving at a speed of 80 km/h without immediately replacing the tire. 2. Driving Distance: Run-flat tires can still travel up to 250 kilometers after a puncture. In reality, if encountering significant damage (such as being punctured by a large sharp object) or poor road conditions, the driving distance may be reduced to several tens of kilometers, typically within the range of around 100 kilometers. The reason run-flat tires do not collapse after losing air is mainly due to their thickened rubber sidewalls. Even without air pressure, the sidewalls can support the vehicle's weight, preventing severe deformation. Therefore, a punctured run-flat tire does not significantly affect the vehicle's driving, and the driver might not even notice it.
16
2
Share

What causes the engine vibration in the Tayron?

The Tayron is equipped with a direct injection engine, which tends to exhibit more noticeable vibration compared to naturally aspirated engines. If the vibration is steady and rhythmic, it is considered normal. However, if you observe a significant increase in vibration or persistent symptoms, it is advisable to inspect and repair the vehicle. Common causes of engine vibration include engine misfire, deterioration or loosening of engine mounts, carbon buildup, and fuel system malfunctions. The Tayron is a mid-size SUV under the Volkswagen brand, with dimensions of 4589mm in length, 1860mm in width, and 1660mm in height, and a wheelbase of 2731mm. The Tayron lineup features three engine options: a 1.4-liter turbocharged engine, a low-power 2.0-liter turbocharged engine, and a high-power 2.0-liter turbocharged engine.
9
0
Share

What are the causes of cylinder liner cracks?

Causes of cylinder liner cracks, apart from manufacturing factors, are primarily due to improper assembly and operational usage. The specific reasons are as follows: 1. Insufficient cooling water: If the diesel engine is operating with a severe shortage of cooling water and cold water is suddenly added to the radiator, the cylinder liner material may contract abruptly, leading to cracks. 2. Overload operation: Prolonged operation of the diesel engine under overload conditions causes a sharp increase in mechanical and thermal stress, which can also result in cylinder liner cracks. 3. Improper operation: If the diesel engine driver or operator forgets to drain the cooling water inside the engine body during winter, the surrounding cooling water may freeze and expand, causing the cylinder liner to crack. 4. Human error: If maintenance personnel do not assemble the cylinder liner according to technical requirements, causing misalignment within the engine block, it can also lead to cylinder liner cracks.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.