How many cylinders does the Jingyi X5 engine have?

What Does It Mean When a Car Indicates an Engine Fault?

When a car indicates an engine fault, it means there is a problem with the engine. The engine's function is to convert the thermal energy of gasoline or diesel into mechanical energy by burning the fuel in a sealed cylinder, causing the gas to expand and push the pistons. Possible causes of engine faults include: Poor-quality gasoline, leading to incomplete combustion of the air-fuel mixture in the cylinder. Carbon deposits on the piston top, causing poor atomization and incomplete combustion. Excessive mileage, weakening the performance of the spark plugs. Advanced vehicle age, with mechanical wear leading to poor engine operation and inefficient combustion or ignition. Malfunctions in certain sensors or the engine control unit (ECU). If the fault light is on but the engine runs smoothly or with only slight vibration, the owner can continue using the vehicle normally. However, it is advisable to visit a repair shop at the earliest convenience to use a diagnostic scanner to read the fault codes and perform repairs based on the code definitions. Engine maintenance methods: Regularly change the engine oil and oil filter; use lubricants of appropriate quality grades; periodically clean the radiator; regularly replace the air filter, oil filter, and fuel filter; maintain good crankcase ventilation with periodic cleaning; and clean the fuel system regularly.

17

2

Share

Does the Civic belong to GAC Honda or Dongfeng Honda?

The Civic is a model under Dongfeng Honda, while the more well-known Accord and Fit belong to GAC Honda. Below is an introduction to the related content: 1.0-liter turbocharged engine: The Civic is a compact sedan equipped with two engines, one being a 1.0-liter turbocharged engine and the other a 1.5-liter turbocharged engine. The 1.0-liter turbocharged engine is a three-cylinder engine with a maximum power of 92 kW, maximum torque of 173 Nm, maximum power speed of 5500 rpm, and maximum torque speed ranging from 2000 to 4500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a CVT transmission. 1.5-liter turbocharged engine: The 1.5-liter turbocharged engine has a maximum power of 130 kW, maximum torque of 226 Nm, maximum power speed of 5500 rpm, and maximum torque speed ranging from 1800 to 5500 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 6-speed manual transmission or a CVT transmission.

17

1

Share

How to Check Where the License Plate Has Been Shipped?

The license plate sent by the DMV can be tracked through the following methods: calling 11183, using the Traffic Management 12123 app, or the Postal APP. Generally, it takes 3-4 days for the license plate to be delivered. The license plate delivery service is provided by EMS, and the delivery speed might be slightly slower. Typically, from the time the license plate is shipped to the time it is received by the owner, it will not exceed one week at the latest. Below are the detailed instructions: 11183 Phone Inquiry: 11183 is the phone number for China Post EMS. After dialing, transfer to a customer service representative, provide the license plate number, and you can get the logistics progress of the license plate. Generally, it takes 3-4 days for the license plate to be delivered. The license plate delivery service is provided by EMS, and the delivery speed might be slightly slower. Typically, from the time the license plate is shipped to the time it is received by the owner, it will not exceed one week at the latest. Traffic Management 12123 App Inquiry: Register and log in to the app. For Apple phones with iOS 15 or above, use the Traffic Management 12123 app (V2.8.1B437). You can check the progress of the license plate under the 'Online Progress' section. Once the license plate is made and shipped, you can also track the logistics. If your phone number is bound, you will receive an SMS notification when the license plate is shipped. Postal APP Inquiry: For Apple phones with iOS 15 or above, download the Postal APP (V3.5.5). This is the official app of China Post. Open the app, and at the top, there is a mail progress search bar. Click to enter the inquiry page. On the page, select 'Motor Vehicle License Plate' and enter the license plate number or acceptance number to check the status. The Traffic Management 12123 app is the official client of the Internet Traffic Safety Comprehensive Service Management Platform, supported by the Traffic Management Science Research Institute of the Ministry of Public Security. It provides comprehensive traffic safety services for vehicle owners and drivers, including user registration, appointment and processing of vehicle and driver's license services, traffic safety information inquiry, business reminders, service guidance, road access services, and more. Main Features: User registration; Binding personal vehicles and driver's licenses; Handling traffic violations recorded by electronic monitoring devices; Appointment for driver's license tests; Pre-selection of new vehicle license plates; Replacement of vehicle registration certificates, license plates, and driver's licenses; Replacement of vehicle safety inspection certificates; Extension of driver's license renewal, review, and submission of physical condition certificates; Inquiry and notification of vehicle and driver's license-related information; Navigation to traffic management service locations; New online self-service for handling traffic violations.

16

1

Share

What does AT mean?

AT stands for torque converter automatic transmission. Other types of automatic transmissions include AMT, DCT, and CVT. The AT transmission is the most mature and widely used transmission technology. DCT, also known as dual-clutch transmission, has a structure similar to manual transmissions but features two sets of clutches. One clutch controls odd-numbered gears, while the other controls even-numbered gears. DCTs offer fast shifting speeds, high transmission efficiency, and are well-suited for use with small-displacement turbocharged engines. AMT is the earliest type of automatic transmission. Its structure is identical to a manual transmission, but it includes a control mechanism that operates the clutch and gear shifts. CVT transmissions are commonly used in some domestic and Japanese cars. They are compact, lightweight, and cost-effective. Most vehicles equipped with CVTs are highly fuel-efficient. CVTs provide smooth shifting without any noticeable jerking. AT transmissions exhibit minimal shift shock, while DCTs can produce noticeable jerking during low-speed shifts. AMT transmissions have significant shift shock and have largely been phased out. The development and manufacturing costs of AT transmissions are generally high, and they are often used in high-end vehicles. A manual-automatic transmission combines manual and automatic shifting modes. This type of transmission integrates the advantages of both automatic and manual transmissions, minimizing power loss in the shifting system. While manual mode allows drivers to freely adjust gears and RPMs, unlike pure manual transmissions, manual-automatic transmissions feature an automated clutch system. In manual mode, drivers only need to shift gears up or down based on speed. If the speed doesn't match the selected gear, the transmission will automatically downshift; if the speed exceeds the gear's range, manual upshifting is required. Working Principle: Structurally, a manual-automatic transmission consists of a standard gearbox (similar to a manual transmission), an electronically controlled clutch, an automatic shift mechanism, and an electronic control unit. The electronically controlled clutch automatically engages, disengages, or partially engages the clutch as needed, controlled by the transmission ECU via a stepper motor. The automatic shift mechanism selects the appropriate gear using two stepper motors, also controlled by the ECU. The gear lever resembles that of an automatic transmission, with no clutch pedal. Essentially, the system simulates manual shifting through automation. During normal driving, it operates like a hydraulic automatic transmission, but the clutch disengages when the vehicle is stationary, requiring the brake to be pressed on slopes to prevent rolling. In manual mode, the driving experience resembles that of a manual transmission, with direct power delivery and no need to operate the clutch. Gear changes can also be skipped rather than sequential. Product Types: Electronic and hydraulic controls are added to the base automatic transmission. Even in manual mode, the system remains under automatic control—automatically upshifting if forgotten, preventing downshifts at high speeds, starting in 1st or 2nd gear, and switching to "adverse weather mode" to prevent wheel slip. Combines a traditional H-pattern manual transmission with an automated clutch system, retaining the manual shift mechanism while automating clutch operation. Integrates an automated clutch with electronic-hydraulic sequential shifting, based on a manual transmission.

18

2

Share

What is the emission standard of the Honda Fit?

The Honda Fit complies with the China V emission standard. All third-generation Fit models produced after 2014 meet the China V emission requirements. The Fit is a hatchback launched by GAC Honda, with dimensions of 4065mm in length, 1695mm in width, and 1525mm in height, and a wheelbase of 2530mm. The Fit features a new geometric front MacPherson strut independent suspension and a high-rigidity rear torsion beam semi-independent suspension, both equipped with stabilizer bars for excellent response and handling stability. The new CVT transmission delivers powerful acceleration and exceptionally smooth gear shifts, while the G-design Shift provides a dynamic and exhilarating driving experience.

8

1

Share

How to Distinguish BMW Mini Models?

BMW Mini model differentiation methods: 1. Different engines: BMW Countryman: 1.6L turbocharged engine; BMW JCW: 2.0L turbocharged engine; BMW Clubman: 1.6L turbocharged engine; 2. Different fuel consumption: BMW Countryman's fuel consumption is 8.3; BMW JCW's fuel consumption is 5.7; BMW Clubman's fuel consumption is 7.3. BMW Mini is a British microcar brand, now under the BMW Group. The dimensions of the BMW Mini are 3729mm in length, 1683mm in width, 1407mm in height, with a wheelbase of 2467mm.

18

0

Share

How many cylinders does the Jingyi X5 engine have?

What Does It Mean When a Car Indicates an Engine Fault?

Does the Civic belong to GAC Honda or Dongfeng Honda?

How to Check Where the License Plate Has Been Shipped?

What does AT mean?

What is the emission standard of the Honda Fit?

How to Distinguish BMW Mini Models?

What are car headlights?

How to Turn on the Cold Air in the Southeast DX3 Air Conditioning?

Where to Go for Vehicle Ownership Transfer?

Is the Sehol Engine Made by Volkswagen?