How many cylinders does the imported BMW 118i have?

1 Answers
ColemanDella
07/30/25 5:25am
The imported BMW 118i has four cylinders. This model is equipped with a 1.5T turbocharged engine, which delivers a maximum power of 100kw and a peak torque of 200Nm. It is paired with an 8-speed automatic transmission. The imported BMW 118i is a compact sedan launched by BMW, featuring the brand's signature interior design with black plastic and silver aluminum panels. The dashboard is relatively simple and slightly tilted towards the driver's side for easier operation while driving.
Was this review help?
20
2
Share
More Forum Discussions

Does Stalling on a Slope Mean Immediate Failure?

Stalling during Subject 2 (practical driving test) does not count as an immediate failure, but it will result in point deductions. However, you must restart the engine within 30 seconds; otherwise, it will be considered a test failure. Proper clutch control during the slope parking and starting segment of Subject 2 can prevent stalling. The Subject 2 examination consists of five mandatory components: reverse parking, parallel parking, slope parking and starting, right-angle turns, and curve driving (commonly known as S-turns). Below is an introduction to the driving test subjects: 1. Subject 1: A written examination on road traffic safety laws, regulations, and related knowledge (Subject 1), conducted on a computer. The full score is 100, with 90 or above required to pass (including 90). 2. Subject 2: A practical driving skills test (Subject 2) conducted in a closed course with a real vehicle. Results are simply pass or fail. The five mandatory components—reverse parking, parallel parking, S-turns, right-angle turns, and slope parking and starting—are performed in sequence. The full score is 100, with 80 or above required to pass (including 80). 3. Subject 3: A road driving skills test (Subject 3) conducted on actual roads or simulated environments with a real vehicle. The full score is 100, with passing scores of 90 or above for large buses, 80 or above for large trucks, and 70 or above for other vehicle types. 4. Subject 4: A written examination on safe and civilized driving knowledge (Subject 4). The full score is 100, with 90 or above required to pass (including 90).
14
3
Share

Can You Press the Accelerator While Reversing?

Whether you need to press the accelerator while reversing mainly depends on whether there are obstacles during the process. Below are some key points about reversing: 1. Precautions: Whether you're a beginner or an experienced driver, this is a crucial point to note. Not only should you avoid pressing the accelerator while reversing, but you should also avoid half-pressing the brake. Beginners, in particular, should drive at a speed slower than idle when reversing. This allows more time to observe the surroundings. 2. Basic Techniques: When parking in a parking lot, first, visually assess the width of the parking space, check for obstacles behind, whether there are cars parked on either side, and if the length suits your vehicle. If visibility is poor at night, step out to check the exact position before reversing.
1
4
Share

How Many Turns is a 90-Degree Steering Wheel Rotation?

A quarter turn. Below is relevant information about steering wheels: 1. Introduction to steering wheels: A wheel-shaped device used to control the direction of cars, ships, aircraft, etc. 2. Function of steering wheels: The steering wheel is generally connected to the steering shaft via splines, and its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. When turning with a larger diameter steering wheel, the hand force required from the driver can be reduced. The steering intermediate shaft, as a connecting component between the steering gear and the steering shaft, facilitates the standardization of steering gears, compensates for errors during manufacturing and installation, and makes the installation of the steering gear and steering wheel in the vehicle more reasonable.
11
2
Share

Where to Connect the Reverse Control Wire?

Reverse control wire is a controlled wire, controlled by the reverse light wire, and draws power from the reverse light positive wire. Below is an introduction related to reversing: 1. Precautions: Whether you are a novice or an experienced driver, this is a must-notice point. Not only should you not press the accelerator while reversing, but you should also avoid half-pressing the brake, especially for novices who should drive at a speed slower than idle speed. This allows more time to observe the surrounding environment. 2. Basic essentials: When parking in a parking lot, first, visually estimate the width of the parking space, check for any obstacles behind, whether there are cars parked on both sides, and whether the length fits your vehicle model. If visibility is poor at night, step out to observe the exact position before reversing.
13
5
Share

What brand is FF car?

FF car is Ferrari FF. Additional information: 1. Dimensions: The Ferrari FF is one of the larger models in the Ferrari family, with a length of 4907mm, width of 1953mm, height of 1379mm, and a wheelbase of 2990mm. 2. Model: The Ferrari FF is a very comfortable and highly attractive model, exuding elegance from head to toe, with every detail and decoration reflecting sophistication and prestige. Its cabin also radiates unique charm. The Ferrari FF has a trunk size of 450 liters, and the two rear seats can be folded individually to increase luggage space, up to a maximum of 800 liters. The central part of the Ferrari FF's rear backrest can also be folded down to accommodate particularly large items.
2
1
Share

What are the lighting features of the GL8?

Detailed explanation of Buick GL8 lighting features is as follows: 1. Turn signals: Push the control lever downward to activate the left turn signal; lift the control lever to activate the right turn signal. 2. High beams: To turn on the high beams: first turn on the low beams from the lighting control panel on the left side of the driver's seat, then push the lighting control lever forward. 3. Fog lights: The fog light switch is located next to the lighting control knob; press it to turn on the fog lights. 4. Automatic headlights, low beams, and position lights: Rotate the lighting knob to the AUTO position to activate the automatic headlights. By rotating the lighting control button sequentially, you can turn on the position lights, automatic headlights, and low beams in order.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.