How many cylinders does the Honda Civic 1.5T engine have?

3 Answers
DiElena
07/29/25 6:11am
The Honda Civic 1.5T version is equipped with a four-cylinder engine, which adopts Honda's technology and is a domestically produced engine. The model of the Honda Civic's 1.5T engine is L15B8, with a maximum power output of 130kW and a maximum torque of 220Nm. For daily maintenance of the Honda Civic's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, which can cause various problems for the engine. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication parts, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
Was this review help?
7
1
Share
OJuliet
08/12/25 9:39am
My friend owns a Honda Civic 1.5T, which I've driven a few times. The engine is a 4-cylinder one. It feels quite powerful, with immediate thrust when you step on the accelerator, and paired with that turbocharger, it's very responsive when starting in the city and easy to handle in traffic jams. In terms of fuel consumption, it's around 6 to 7 liters per 100 kilometers, saving a lot on gas money. The Civic's design is very practical, with a lightweight and durable 4-cylinder engine that makes it agile to drive, and it doesn't get too tiring even on long trips. The engine sound is steady, and it doesn't become annoying even after prolonged driving. Honda's technology in compact cars has always been reliable, and the Civic's strong sales are partly due to this engine. If you're choosing a car, this 4-cylinder combination is worth considering—it's both practical and economical.
Was this review help?
1
1
Share
Expand All
BryceMarie
08/12/25 9:40am
As a car enthusiast, I've studied the Honda Civic 1.5T engine, which is an inline 4-cylinder turbocharged configuration. This layout is very popular in compact cars because of its small size and light weight, saving space and improving efficiency. The turbo system delivers peak torque at low RPMs, providing quick acceleration response and making daily driving very enjoyable. The engine has a maximum horsepower of around 174, and combined with the Civic's lightweight body, it offers powerful yet fuel-efficient performance. The design incorporates variable valve timing technology to optimize combustion efficiency and reduce emissions. Honda has a strong reputation in engine development, and this 4-cylinder engine is one of its representative works. It delivers smooth performance, making it ideal for those who appreciate a great driving experience.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

What to pay attention to when buying a used Audi A6

When buying a used Audi A6, you need to pay attention to the vehicle's age, odometer tampering, and the appearance and operation of the engine. Here are the specific details: 1. Vehicle Age: Check the rubber panels on the pedals, as they can reveal the actual age of the vehicle. Worn pedal mats, dirty seats, and scuffed door handles all indicate that the car has been driven a significant distance. If the seller provides seat covers, be sure to inspect the original seat cushions. Many people worry about odometer tampering by the previous owner. You can request the vehicle's recent maintenance invoices from the seller, which should note the mileage. 2. Odometer Tampering: To get a better price, some sellers may give the car a full cosmetic makeover to make it look newer. However, some unscrupulous individuals may tamper with the odometer, turning a car that has driven hundreds of thousands of kilometers into one that appears to have only driven tens of thousands. It’s reported that many auto repair shops offer odometer adjustment services, which can be done in as little as half an hour. 3. Engine Appearance and Operation: Many people assume that a quieter engine is better, but this isn’t always accurate. Instead, listen to whether the engine starts with a loud, crisp sound or if there are any unusual noises. Also, observe if the engine idles smoothly. Start the engine and check the color of the exhaust. If the exhaust is semi-transparent light gray, the engine is in good condition. Black smoke indicates poor engine tuning, blue smoke suggests the engine is heavily worn, and white smoke means the cylinder gasket is nearing failure.
12
5
Share

Why is my Geely car not starting?

Geely car not starting due to insufficient fuel pressure. Detailed reasons for no start: 1. Insufficient fuel pressure: If the horn and headlights work, the owner can use a screwdriver to test spark at the negative terminal of the ignition wire. Solution: Refuel. 2. Incorrect throttle position sensor signal: If neither horn nor headlights work, test spark at the starter terminal with a wire. Solution: Replace. 3. Faulty fuel pump. Solution: Replace. 4. Faulty spark plugs: Test spark between the distributor insulator terminal and distributor housing. If no spark, there's a broken wire between the distributor insulator terminal and the ignition coil "-" terminal. Solution: Replace spark plugs.
18
0
Share

What Causes the Key to Fail to Start the Vehicle?

Car steering wheel lock, incorrect gear position, and vehicle malfunctions can prevent the key from starting the vehicle. Car steering wheel lock: When the steering wheel cannot be turned and the key cannot be twisted, it is due to the vehicle's simple anti-theft feature being at the intersection of key unlocking and lock cylinder torque. Incorrect gear position: For automatic transmission vehicles, the gear must be in "P" (some vehicles include "N") to start. Some vehicles even prevent the key from being removed unless the gear is in "P". Vehicle malfunction: If the car still cannot start in "P" gear or the dashboard shows an abnormal gear position, it may be due to a faulty electronic gear sensor or electro-pneumatic valve. Solutions for the key failing to start the car: If the steering wheel is locked, gently turn the steering wheel clockwise (or counterclockwise) and then lightly twist the key to unlock it. When parking, try to straighten the steering wheel before turning off the engine and removing the key. For incorrect gear positions, check the gear before starting and develop the habit of placing the gear in "P" before turning off the engine. For vehicle malfunctions, it is recommended to seek timely repairs.
6
3
Share

What are the basic components of a car?

Automobiles are generally composed of four major parts: the engine, chassis, body, and electrical equipment. Below is relevant information: 1. Engine: crankshaft connecting rod mechanism, valve train, fuel supply system, ignition system, lubrication system, cooling system, and starting system. 2. Chassis: transmission system, running gear, steering system, and braking system. The transmission system transfers engine power to the driving wheels and consists of assemblies such as the clutch, gearbox, universal transmission device, and main reducer. The running gear is composed of the frame, steering axle, drive axle, suspension, wheels, etc. The steering system consists of the steering gear and steering mechanism. The braking system generally comprises two independent devices: the service brake system and the parking brake system. 3. Body and electrical equipment: The body is used to accommodate the driver, passengers, and cargo. The electrical equipment consists of the power source, ignition system, starting system, as well as the automobile lighting system, signal system, and instruments.
6
2
Share

What are the differences between the Lingpai and the Accord?

Both the Lingpai and the Accord have multiple models under their lineups, and the comparison results may vary depending on different configurations and price points. To objectively compare these two vehicles, we selected the latest top-trim models of each for comparison. The latest top-trim model of the Lingpai is the 2020 Hybrid 1.5L Sharp Flagship Edition, while the latest top-trim model of the Accord is the 2021 Hybrid 2.0L Sharp Intelligence Starry Sky Limited Edition. The comparison is as follows: 1. Price: The official price of the top-trim Lingpai is cheaper than that of the top-trim Accord. 2. Overall Body: The body of the top-trim Lingpai is shorter than that of the top-trim Accord, and the wheelbase of the top-trim Lingpai is also shorter than that of the top-trim Accord. 3. Overall Configuration: The top-trim Accord has more features than the top-trim Lingpai. 4. Power Output: The top-trim Accord has a more powerful output than the top-trim Lingpai.
2
4
Share

Do I need to watch the traffic lights when driving on the auxiliary road?

Auxiliary roads need to observe the traffic lights on the main road. When entering the main road from the auxiliary road, you should watch the straight-going signal lights of the main road, i.e., you can enter the main road when the signal light is green. Before entering the auxiliary road, you need to carefully observe the traffic lights. The method to check the traffic lights when entering the main road from the auxiliary road is as follows: 1. If there are no traffic lights when entering the main road from the auxiliary road: you can turn on the left turn signal and follow the green light traffic flow to enter the main road; 2. If there are traffic light turn indicators on the auxiliary road: you must drive according to the traffic light instructions; 3. Function: Generally, the main function of this light is to allow vehicles on the auxiliary road to directly enter the left-turn lane. If you want to turn left and go straight on the main road, you can merge when the green light is on, but you need to pay attention to the vehicles on the main road.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.