How Many Cylinders Does the Geely Emgrand Engine Have?

1 Answers
StDeclan
07/29/25 1:27pm
Geely Emgrand adopts a four-cylinder engine. Below is the relevant introduction of Geely Emgrand: Power: Equipped with a 1.5L naturally aspirated engine, paired with a 5-speed manual transmission and a continuously variable transmission, delivering a maximum horsepower of 109, a maximum power of 80 kW at 6000 rpm, and a maximum torque of 142 Nm at 4400 rpm. Body Dimensions: Geely Emgrand is a compact car under Geely Auto, with exterior dimensions of 4632mm in length, 1789mm in width, and 1470mm in height, a wheelbase of 2650mm, and a body structure of a 4-door, 5-seater sedan.
Was this review help?
12
3
Share
More Forum Discussions

What does 'slow through sand or fast through sand' mean?

When encountering sandy roads, it is necessary to pass through as quickly as possible. This is a rule summarized by drivers based on long-term experience while driving on such surfaces. The biggest threat on sandy terrain is getting stuck. If a car slows down while passing through sand, once it stalls, the required torque becomes very high. Starting under such conditions in sand can easily lead to getting stuck deeper. The most reasonable approach is to appropriately increase the speed (avoid slamming the accelerator) and avoid slowing down or stopping before passing through. Although waterlogged sections, like sandy terrain, create resistance to driving, the main concern is water splashing into the exhaust pipe, causing the engine to stall. Therefore, driving through water should be done at a low gear and low speed. Other techniques are as follows: Low gear for climbing hills: What matters when going up or down hills is the RPM rather than the speed. If the RPM drops below 2500, climbing will become more difficult. Shifting to a lower gear midway not only saves no fuel but also increases mechanical friction. Rush red, not green: When approaching a green light, gradually reduce the speed to prepare for a sudden change to red. If it's a red light, maintain normal speed, as it is likely to turn green by the time you reach the intersection. Rear different from front: If the front wheels skid, correcting in the opposite direction is the right approach. However, if the rear wheels skid, correcting in the opposite direction will increase the skid's magnitude. The principle is simple: if the rear wheels skid to the right, turning left will cause the right side of the rear wheels to accelerate, reducing the grip on the right side and causing greater displacement. Conversely, turning right will speed up the left wheels, increasing the grip on the right side and helping the car regain direction.
20
1
Share

How to Disassemble the Murano's Center Console?

The method for disassembling the Murano's center console is as follows: 1. Pry open the rubber cover beneath the silver trim; 2. Unscrew the bolts under the silver trim and remove the silver trim; 3. Unscrew the screws on both sides of the air vents and remove the air conditioning vents; 4. Remove the bolts above and below the main unit to disassemble the center console. Taking the 2021 Murano as an example, its body dimensions are: length 4897mm, width 1908mm, height 1691mm, wheelbase 2830mm, fuel tank capacity 72l, trunk capacity 535l, and curb weight 1656kg. The 2021 Murano features a front McPherson independent suspension and a rear longitudinal trailing arm semi-independent suspension, with a maximum horsepower of 175ps, maximum power of 104kw, maximum torque of 235mm, and is paired with a 6-speed manual transmission.
10
5
Share

What Causes the Squeaking Sound When the Car is Cold That Disappears After Warming Up?

The reasons for the squeaking sound when the car is cold that disappears after warming up are: 1. The generator belt has aged after prolonged use, causing it to slip during cold starts; 2. Worn bearings in the water pump or generator. The correct method for warming up the car is: 1. Start the vehicle and keep the air conditioning turned off; 2. Let the engine idle for 1 minute to warm up; 3. Drive slowly after the engine runs smoothly; 4. Once the engine temperature gauge rises by 1 to 2 bars, you can drive normally and use the air conditioning. The effects of not warming up the car include: 1. Increased wear on the engine, transmission, and other engine components, leading to a shortened lifespan; 2. Higher fuel consumption, making the engine more prone to carbon buildup.
4
1
Share

How to Deal with the Audi Yellow Triangle Exclamation Warning Light?

A triangle with an exclamation mark inside indicates a malfunction in the vehicle's general performance or components and functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, and engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault warning in cars. In addition to the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark inside, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four situations: Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a problem with the transmission or transmission fluid level being below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire Pressure Abnormal: A bracket with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, indicating a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or perform a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.
15
0
Share

How to Take a 45-Degree Photo for the Vehicle License?

When taking the photo, it should be shot from a 45-degree angle on the left front side of the vehicle. For motorcycles and trailers, the photo should be taken from a 45-degree angle on the left rear side. The vehicle license photo should be a color photo of the exterior of the motor vehicle. Specifications: Length 88mm±0.5mm, width 60mm±0.5mm, with a corner radius of 4mm±0.1mm. Additional Information: 1. Processing Location: Embassies (consulates) and foreign license plate vehicles should go to the Vehicle Management Office. Other motor vehicles should go to the branch office of the Vehicle Management Office corresponding to the address recorded in the owner's identity document. 2. Processing Time: For replacement (renewal) of the vehicle license, it will be completed within one working day from the date of acceptance. 3. Fees: Temporary vehicle license plates cost 5 yuan per sheet, and the vehicle license costs a processing fee of 15 yuan per book.
11
0
Share

What is required to renew a driver's license after six years?

To renew a driver's license after six years, the following steps are required: 1. Prepare two copies of your ID card and bring the original ID card. 2. Bring your original driver's license. 3. Prepare two recent one-inch, bareheaded, color photos. 4. Fill out and prepare the motor vehicle driver's license application form, with the photo pasted in the upper right corner. 5. Bring a medical examination certificate from a county-level or higher hospital. Alternatively, you can undergo a free medical examination at the vehicle management office. Additional relevant information is as follows: 1. After preparing these materials, submit them to the vehicle management office staff. Once verified, you can receive your new driver's license. 2. In some cities, the license can be issued on the spot, while in larger cities, it takes 15 working days to process, and the holder will be notified to pick it up. You can also opt for express delivery, but the holder must bear the courier fee.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.