How many cylinders does the Geely DHE15 hybrid engine have?

2 Answers
StElliott
07/23/25 11:59pm
Geely DHE15 hybrid engine is a three-cylinder engine. Number of engine cylinders: Common cylinder counts for automotive engines include 3, 4, 5, 6, 8, 10, and 12 cylinders. With the same bore diameter, more cylinders mean larger displacement and higher power output. For the same displacement, more cylinders allow for smaller bore diameters and higher achievable RPM, resulting in greater power enhancement. Displacement and cylinder count correspondence: Engines with 1.0L-1.5L displacement typically use 3 cylinders, 2.0L engines generally have 4 cylinders, 2.5L engines use 5 cylinders, approximately 3.0L engines usually have 6 cylinders, around 4.0L displacement employs 8 cylinders, 5.2L engines use 10 cylinders, and engines above 5.5L utilize 12 cylinders.
Was this review help?
13
2
Share
DiCaleb
08/10/25 7:48pm
I recently studied Geely's hybrid system, the DHE15 engine is a 1.5-liter three-cylinder, which is particularly suitable for hybrid design. The three-cylinder engine is lighter than traditional four-cylinder ones, and the reduced weight allows the car to start faster, making it quite fuel-efficient for daily city driving. Geely uses turbocharging and electric assistance to compensate for the common vibration issues of three-cylinder engines. I test-drove the Borui equipped with this engine, and in hybrid mode, I hardly felt any vibration—it was actually very quiet. However, there is a slight noise at high speeds, but the overall fuel efficiency is truly impressive, averaging around 5L/100km, which saved me a lot of money on long trips. For those new to hybrids, this three-cylinder design combined with the advantages of electric motors is worth noting, as the lightweight design can also extend battery life.
Was this review help?
14
5
Share
Expand All
More Forum Discussions

What Are the Hazards of Overfilling Transmission Fluid?

Hazards of excessive transmission fluid level: 1. Automatic transmission may leak oil externally: When the transmission fluid level is too high, rotating components come into contact with the oil during operation. Under the high-speed rotation of planetary gear mechanisms or clutches, the oil becomes agitated, leading to expansion and boiling, causing it to leak out through the filler hole and vent valve. 2. Can cause shifting shock: Excessive air entering the fluid can also cause air blockage at the drain holes on the control valve body, resulting in poor drainage and leading to shifting shock. 3. Can result in low working oil pressure: An excessively high transmission fluid level causes rotating components to agitate the oil, leading to the formation of bubbles. When this aerated oil enters the oil pump, the pump cannot establish the required oil pressure. Overfilling the transmission fluid beyond the maximum limit makes it easier for the oil to foam during gear rotation. 4. Reduces the cooling function and transmission efficiency of the transmission: The main functions of transmission fluid are lubrication and cooling. The fluid dissipates heat through the transmission housing and the transmission cooler. If too much oil is added, gear rotation encounters greater resistance, reducing the transmission's cooling function and efficiency. This requires the engine to consume more fuel, decreasing the vehicle's fuel economy. Additionally, this energy loss is converted into heat within the transmission, causing its temperature to rise continuously. Ultimately, this leads to premature wear of bearings and burning of friction plates inside the transmission, both of which are expensive to replace or repair. In summary, the fluid level should neither be too high nor too low.
20
1
Share

How Many Spark Plugs Should Be Replaced Each Time?

Four spark plugs need to be replaced at a time in a car. Theoretically, even if you replace one spark plug with the same brand and model, the discharge gap and resistance value between the new and old spark plugs will differ. Not replacing all of them may result in issues such as engine shaking, difficulty in acceleration, and increased fuel consumption. Steps for replacing spark plugs: Open the engine hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires according to the firing order, then secure the cover. If a spark plug is damaged, it can directly cause issues such as leakage in the vehicle's ignition system, increased fuel consumption, and reduced power. The most critical issue is difficulty in ignition, affecting the vehicle's normal operation. Severe spark plug erosion, such as scarring at the top, electrode melting, or burning, indicates that the spark plug is damaged and should be replaced.
5
4
Share

What causes the loose and noisy brake caliper pin?

Pin loosening, in this case, replacing the brake caliper pin will solve the issue. Below is relevant information about the brake caliper: Overview: The brake caliper is an indispensable chassis braking component in the braking system. Its primary function is to push the brake pad, which then rubs against the brake drum, reducing the vehicle's speed or bringing it to a stop. When the brake pedal is pressed, the master cylinder generates thrust to push hydraulic fluid to the caliper. The piston inside the caliper moves under hydraulic pressure, pushing the brake pad. Classification: Automobile brakes are divided into air brakes and hydraulic brakes. The air brake system consists of an air compressor, at least two air reservoirs, one master cylinder, one quick-release valve for the front wheels, and one relay valve for the rear wheels. The hydraulic brake system consists of a master cylinder (hydraulic brake pump) and a brake fluid reservoir.
3
0
Share

What is Toyota Evans?

Evans is not an automobile brand, but a waterless antifreeze. Also known as waterless coolant, waterless cooling oil, or automotive cooling oil, it is a new type of automotive consumer product and a 'revolution' in automotive history. It completely eliminates the long-standing issues of corrosion, scale, cavitation, and overheating in the cooling system caused by traditional coolants, thereby extending the engine's lifespan. Below are the main benefits of waterless antifreeze: 1. Anti-corrosion: Prevents internal engine rust, keeping the radiator and cooling system as good as new; 2. No or minimal pressure: The cooling system operates under no or minimal pressure, allowing the radiator cap to be opened at any time; 3. Increased power: Eliminates the steam insulation layer, resolves local overheating of the engine, and releases engine power; 4. Faster acceleration: Shorter acceleration distance, smoother acceleration, and more seamless gear shifting; 5. Fuel savings: Provides an ideal working temperature environment for the engine, ensuring more complete and efficient combustion; 6. High boiling point, low freezing point: Resolves issues of ice expansion at low temperatures and overheating at high temperatures; 7. Thermal balance: Exceptional heat conductivity, with viscosity changing according to temperature, balancing the internal temperature of the engine; 8. Reduced emissions: Improved engine operation leads to more complete combustion, lower emissions, and reduced engine noise; 9. Less maintenance: Prevents corrosion inside the engine cooling system, reduces maintenance needs, and extends engine lifespan; 10. Slower cooling: Delays uneven engine heat dissipation.
11
1
Share

How to reset the maintenance light on a 2017 Haval H6?

17 Haval H6 maintenance light reset method: 1. Insert the key and keep the engine off; 2. Press the reset button once to display the system that needs to be reset, each press will switch to the next system; 3. Select the system that needs to be reset, and hold the reset button for about 3 seconds; 4. The multifunction display on the instrument panel shows the relevant icon, indicating the maintenance light has been successfully reset. The Haval H6 has a length, width, and height of 4640mm, 1825mm, and 1690mm respectively, with a wheelbase of 2738mm. The Haval H6 is positioned as a city SUV, and in terms of drive form, it has two modes: two-wheel drive and four-wheel drive. The H6 is built on a new platform different from the previous H3 and H5, characterized by the use of a unibody structure. The four-wheel-drive model of the H6 uses an on-demand four-wheel-drive system, unlike the body-on-frame structure and part-time four-wheel-drive system adopted by the H3 and H5. Although this may affect the H6's off-road performance to some extent, the advantage is that it can reduce body weight, improve fuel economy, and provide better ride comfort.
9
0
Share

How many points are deducted for reversing or driving against traffic on the highway?

Reversing or driving against traffic on the highway will result in a deduction of 12 points. Here are the relevant details: Follow lane discipline: When driving on the highway, vehicles must adhere to traffic regulations, with different vehicle types staying in their designated lanes. Except under special circumstances, avoid driving in lanes not assigned to your vehicle type for extended periods. Avoid unnecessary lane changes: Do not change lanes arbitrarily while driving on the highway. If overtaking is necessary, always signal in advance and only overtake in the adjacent lane. Do not perform consecutive overtakes, and return to your original lane promptly after overtaking, ensuring you do not cross lane markings.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.