How many cylinders does the Fengdu MX6 engine have?

What Causes Wheel Noise?

The causes of wheel noise are as follows: Thin brake pads: If you hear a screeching sound from the tires, it is a warning that the brake pads are too thin and need to be replaced. The rear wheel brake pads have a mechanical warning indicator that emits a screeching noise when the pads are too thin, especially when braking. The sound can be very harsh, and it is essential to visit a repair shop immediately to replace the brake pads. Continuing to drive under such conditions is highly dangerous. Bearing failure: If you hear a humming sound from the tires, be alert. This type of wheel noise is often caused by a faulty bearing. Since the bearing supports the tire, it must be inspected and repaired at a 4S shop immediately to avoid accidents. Abnormal tire pressure: While driving, it is common to hear tire noise, but there is a normal range for tire noise, around 2.4 bar. If you hear excessive tire noise while driving and the steering feels lighter or unstable, it indicates that the tire pressure is too high. In this case, some air should be released from the tires. Excessively high tire pressure is very dangerous, especially when driving on highways, as it can lead to a tire blowout.

8

3

Share

What Does Loss Assessment Mean? Isn't It Reimbursed Based on the Actual Repair Costs?

Loss assessment refers to the process where, after an accident occurs, the insurance company covering the vehicle assigns an assessor to the scene to verify and price the accident damage. Generally, the insurance company will compensate the amount assessed by the loss assessor after the vehicle is involved in an accident, rather than reimbursing the actual repair costs. Below is relevant information about vehicle loss assessment: 1. Conditions for vehicle loss assessment: Currently, auto insurance policies in the market include a self-service inspection and claim settlement feature for small amounts. Only when the loss exceeds a certain amount will the policyholder's report trigger an on-site inspection and assessment by a loss assessor. However, there may be exceptional cases involving small amounts that still require an on-site assessment by a loss assessor. 2. On-site loss assessment for vehicle accidents: Insurance company personnel arrive at the scene and issue an "Inspection Report"; simultaneously, traffic police will also arrive and issue an "Accident Determination Certificate." The vehicle owner only needs to take the loss assessment report and the accident determination certificate to the repair shop for vehicle repairs.

2

1

Share

Should eyebrows be visible in driver's license photos?

Eyebrows should be visible in driver's license photos. Driver's license photos are considered official ID photos. The requirements are: front-facing photo without headwear (no hats), where both ear contours and the equivalent of an Adam's apple for men should normally be visible. Background colors are mostly red, blue, or white, with sizes typically being 1-inch or 2-inch. Below are detailed photo requirements: 1. Take a front-facing, bareheaded color photo without uniform-style clothing. Avoid wearing clothes similar to the background color; dark-colored clothing is preferred. 2. Hair should not cover eyebrows, eyes, or cheeks. Obvious jewelry should be avoided in ID photos. 3. Maintain a natural expression, avoiding indifferent looks, stiff smiles, or exaggerated expressions. 4. The subject should sit upright facing forward, with head up and chest out, hands naturally placed on the thighs, maintaining a stable posture. Avoid sideways poses, tilted faces, slanted shoulders, raised heads, or hunched backs. 5. The photo should be a recent front-facing, bareheaded color half-body ID photo. Government employees should not wear uniforms, and children should not wear red scarves. 6. Use white background photos; the photo background must be white. 7. The photo should have clear facial features, distinct outlines, rich layers, natural expression, and dark-colored upper clothing.

10

2

Share

What is the difference between Dongfang Shishang Theory Test Center 1 and 2?

Dongfang Shishang Theory Test Center 1 and 2 differ only in their test locations, with virtually no other distinctions. Below are some relevant details about the driver's license subject one exam: 1. Practice extensively: Current test preparation software has question banks nearly identical to the actual exam, and the testing mode fully replicates the real exam—just keep practicing. 2. Exam format: Each test-taker's questions are randomly selected from the question bank in proportion, totaling 100 questions worth one point each. A passing score is 90 points, and the exam duration is 45 minutes. 3. Retake: If you fail the first attempt, you can retake the exam immediately. If you fail again, the exam is considered a complete failure, and you must reschedule. 4. Validity period: Rescheduling does not require redoing online study hours; simply apply through the online platform. After enrolling for the driver's license, you will receive a learning to drive permit, valid for three years, during which you can schedule the subject one exam an unlimited number of times.

1

4

Share

Do Turbocharged Cars Suffer from Altitude Sickness in Tibet?

Turbocharged cars can certainly go to Tibet, and turbocharging is more suitable for the high-altitude climate of Tibet. Whether in terms of performance or fuel consumption, they perform much better than on plains. Turbocharged models are essentially designed specifically for high-altitude conditions, much like airplanes—the higher they fly, the stronger the power and the more fuel-efficient they become. Therefore, turbocharged models in Tibet do not experience the altitude sickness that naturally aspirated engines do. More relevant information is as follows: Note 1: Simply put, for every 1 kilometer increase in altitude above sea level, atmospheric pressure decreases by about 10%. For a typical naturally aspirated engine, power output will correspondingly drop by about 10%. However, modern engines use electronic throttle control, and the ECU will make flexible adjustments based on actual atmospheric pressure. Note 2: Turbocharged engines thrive in high-altitude conditions. In high-altitude operation, the exhaust volume and pressure before the turbo remain the same as in plains operation. However, due to lower atmospheric pressure, the pressure after the turbo is also lower. In plains, the exhaust gas volume can drive the turbo, but when suddenly transitioning to a low-pressure environment, the lower pressure inevitably causes further expansion of the exhaust gas. This effectively increases the exhaust gas volume (due to expansion), resulting in higher turbo expansion ratios and output power in high-altitude conditions compared to plains.

5

1

Share

What is the Principle of Audi's Fatigue Driving Reminder?

The fatigue driving monitoring system is a set of vehicle fatigue driving solutions based on advanced image intelligent recognition and analysis technology, which detects the driver's head movement, eyelid movement, eye closure frequency, gaze direction, yawning frequency and other facial information in real time, and carries out monitoring and data analysis. Extended content, the introduction of fatigue driving reminder is as follows: 1. The fatigue monitoring system commonly equipped in the fatigue driving prompt system is called the 'fatigue driving prompt system'. It is based on the driver's physiological image response and consists of two major modules, ECU and camera. It uses the driver's facial features, eye signals, head movement, etc. to infer the driver's fatigue state, and gives an alarm prompt and takes corresponding measures. It provides active and intelligent safety protection for drivers and passengers. 2. Driver Safety Warning System In addition, some fatigue monitoring systems are called 'driver safety warning systems'. This system is activated when the vehicle enters a straight and flat road that easily makes the driver enter a relaxed state, an environment that easily makes the driver distracted and doze off, and when the speed exceeds 65 km/h. The driver safety warning system consists of a camera, several sensors and a control unit. 3. Fatigue Recognition System Introduction Other fatigue monitoring systems equipped in cars are called fatigue recognition systems (which record the driver's operation behavior from the beginning of driving) and can judge the driver's fatigue level by identifying changes in driving operations during long-distance travel. 4. Attention Assist System Introduction Some other cars are equipped with fatigue monitoring systems called 'attention assist systems'. This system continuously detects the driver's driving style. There are 71 sensors on the vehicle that detect the steering wheel and pedal sensors of longitudinal and lateral acceleration in the speed range of 80-180 km/h. The system can sense that the driver is driving tiredly and then prompt that it is appropriate to take a rest.

14

4

Share

How many cylinders does the Fengdu MX6 engine have?

What Causes Wheel Noise?

What Does Loss Assessment Mean? Isn't It Reimbursed Based on the Actual Repair Costs?

Should eyebrows be visible in driver's license photos?

What is the difference between Dongfang Shishang Theory Test Center 1 and 2?

Do Turbocharged Cars Suffer from Altitude Sickness in Tibet?

What is the Principle of Audi's Fatigue Driving Reminder?

Is the Diesel Car Unable to Shut Off Due to a Malfunction?

What is the reason for abnormal noise in the engine when the car's air conditioning is turned on?

Is maintenance necessary for the oilinsp Sagitar?

What Sound Does a Car Make?