How Many Cylinders Does the FAW Bestune T77 Engine Have?

2 Answers
Doreen
07/29/25 4:44am
FAW Bestune T77 is equipped with the CA4G12TD Blue Road series 1.2T inline four-cylinder turbocharged engine, independently developed by FAW Group. The same engine is also used in the Junpai series models. The engine technologies include direct injection and DVCT, among others. The Bestune T77 is a compact SUV, powered by a 1.5T 169 horsepower L4 engine with a maximum power output of 105KW and a peak torque of 204NM, paired with a 6-speed manual transmission. The vehicle dimensions are 4525mm in length, 1845mm in width, and 1615mm in height, with a top speed of 192KM/h.
Was this review help?
9
0
Share
Ramos
08/12/25 8:25am
The Bestune T77 is generally equipped with a 4-cylinder engine, including its 1.2T and 1.5T turbocharged models, which both feature a four-cylinder design. Why use a four-cylinder engine? Nowadays, automobiles are pursuing energy efficiency and environmental protection. Four-cylinder engines are lighter and more fuel-efficient than six-cylinder ones, providing smooth and economical performance for city driving. As a family-oriented SUV brand, Bestune aims for practicality and affordability, and the four-cylinder engine strikes a balance between power and efficiency. If you've driven this car, you'll notice smooth acceleration, minimal noise during speed increases, and reliable performance on highways. Maintenance is also straightforward, requiring only regular oil and filter changes, unlike high-displacement vehicles that demand more attention. If you're on a budget and looking for an SUV, the Bestune T77's four-cylinder configuration is worth considering for its high cost-performance ratio.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

How to Activate the One-Touch Up/Down Feature for the Vezel's Car Key?

Press the button downward to the first detent and release it when the window reaches the desired position. Press slightly harder to the second detent, and the window will automatically lower. Pull the switch up to the first detent and hold it until the window moves to the required position. Pull the button harder to reach the second detent position.
7
0
Share

How to Start a WM Motor Vehicle?

Check whether the vehicle is safe and properly configured. Before starting the drive motor, fasten the seat belt and ensure the gear is in the N position. After starting the vehicle, press the brake pedal, shift from N to D for forward movement, or from N to R for reverse. Release the handbrake, control the driving speed, and observe the mirrors while driving. This will allow the vehicle to start properly.
6
3
Share

How to replace the battery in a Wuling Hongguang mini key?

Find a coin and insert it into the key slot to use as a tool to pry open the key cover. With the side bearing the logo facing upwards, gently lever it open using the tool. To replace the battery in the key, use a flathead screwdriver to carefully pry the slot area, lifting the casing. Follow the gap created by prying to fully open it.
2
3
Share

How to Turn Off the Rear Wiper on the Teramont?

Briefly turn the ignition on and off, then push the wiper control lever downward to the intermittent wiping position to enter maintenance mode. Lift the wiper arm away from the windshield. Press and hold the square unlock button at the connection point between the wiper arm and the wiper blade, then pull the wiper blade upward to remove it.
8
0
Share

How to Operate the Gear Shift in a Small Car?

Press the clutch pedal all the way down, shift the gear into first gear, slowly release the clutch pedal until the engine speed shows a noticeable drop, then quickly release the handbrake. Press the clutch pedal, shift the gear into neutral, release the clutch, step on the accelerator to rev the engine briefly, and quickly press the clutch pedal again after the brief revving.
6
4
Share

How to adjust the rearview mirrors on a 2012 Buick LaCrosse?

Buick LaCrosse's rearview mirrors are adjusted at the door armrest. The driver should first select the mirror to be adjusted, then adjust the angle of the corresponding mirror. The correct method to adjust the center rearview mirror is to align it parallel to the horizon, with the horizon positioned at the 1/2 point of the mirror's center.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.