How many cylinders does the Dongfeng Honda Civic have?

1 Answers
Kinsley
07/29/25 11:25pm
The Civic is equipped with two engines in total: one is a 1.0-liter turbocharged engine, which is a three-cylinder engine, and the other is a 1.5-liter turbocharged engine, which is a four-cylinder engine. Below is an introduction to the Civic: 1. In terms of appearance, the Civic incorporates a large number of black elements, such as the black front grille, side skirts, newly added small spoiler, and black glossy alloy wheels. The new model offers two exterior designs, with the main adjustments compared to the current model being the body color scheme and front bumper styling, further enhancing the sporty feel. The body dimensions are 4658/1800/1416mm, with a wheelbase of 2700mm. In terms of body colors, the new model will be available in six options: Flash Yellow, Platinum White Pearl, Dark Blue, Rallye Red, Brilliant Sporty Blue, and Crystal White Pearl. The interior will offer three color combinations: black, beige, and brown. 2. In terms of power, the Civic provides two engine options: a 1.0T and a 1.5T. The 1.5T engine can deliver a peak torque of 220N·m and a maximum power output of 130kW (177PS). The 1.5T model paired with a CVT transmission can accelerate from 0-100km/h in just 7.62 seconds, demonstrating excellent performance.
Was this review help?
1
5
Share
More Forum Discussions

Can a Cracked Front Bumper Be Repaired?

A cracked front bumper can be repaired. The repair method for a cracked front bumper is as follows: 1. Remove the bumper; 2. Align the crack on the bumper and secure it with transparent tape; 3. Plug in the soldering iron, flip the bumper over, inspect the internal crack, and once the soldering iron reaches the appropriate temperature, use it to melt and fix the internal crack along its direction; 4. Weld the crack with a PP welding rod using a plastic welding gun; 5. Remove the transparent tape used for the bumper crack, run the soldering iron along the crack again, sand the area with 400-grit coarse sandpaper to smooth it out, apply putty, and let it dry; 6. Sand with wet coarse sandpaper, then use fine sandpaper to achieve a smooth finish, rinse with water, and dry with a clean cloth; 7. After painting, reinstall the front bumper panel.
2
3
Share

What is the method for removing the low beam headlight of the Lavida?

Lavida low beam headlight removal method is: 1. Open the front hood; 2. Remove the fixing screws of the low beam headlight guard plate; 3. Remove the fixing screws between the low beam headlight and the radiator frame; 4. Remove the fixing screws between the low beam headlight and the front bumper guide channel, then grasp the edge of the low beam headlight with your hand to pull it out. Taking the 2019 Lavida as an example, it is equipped with a 1.2T inline 4-cylinder turbocharged engine, with a maximum horsepower of 116ps, maximum torque of 200Nm, and maximum power of 85kW. The 2021 Lavida has body dimensions of: length 4670mm, width 1806mm, height 1474mm, and a wheelbase of 2688mm.
20
0
Share

What are the functions of the braking system?

The functions of the braking system are: 1. To decelerate and stop a moving vehicle; 2. To maintain stable speed for a vehicle driving downhill. Common faults of the braking system: 1. Poor braking performance; 2. Faulty wheel cylinder; 3. Faulty brake; 4. Air infiltration in the brake pipeline. Maintenance methods for the braking system: 1. Use brake disc cleaner to remove dust and oil stains, then wipe clean with a clean towel; 2. Apply lubricant evenly on the surface of the brake caliper guide pin and inside the guide pin groove; 3. Apply high-temperature protectant on the back of the brake pads and inside the sliding grooves at both ends of the brake pads; 4. Apply lubricant on each tire screw rod and the metal contact surfaces between the wheel rim and the hub.
19
3
Share

What is the replacement method for the Buick Excelle's reverse light?

The replacement method for the Buick Excelle's reverse light is: 1. Open the decorative cover at the right end of the rear trunk and remove it; 2. Remove the fixing screw, take out the bulb, and replace it. The car reverse light, installed at the rear of the vehicle, is used to illuminate the road behind the car when reversing and serves to alert vehicles and pedestrians behind. The Buick Excelle has a body length, width, and height of 4609mm, 1798mm, and 1464mm respectively, with a wheelbase of 2460mm and a fuel tank capacity of 44 liters. The Buick Excelle is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 113PS, a maximum power of 83kW, a maximum torque of 141Nm, and is paired with a 7-speed automatic manual transmission.
13
0
Share

How to reset the tire pressure warning on a BMW X1?

Method to reset the tire pressure warning on a BMW X1: Close all doors; Insert the key; Press the start button (without pressing the brake pedal); Allow the computer to complete self-check; Press and hold the odometer reset button on the dashboard until the maintenance reset indicator appears; Use the information switch button on the turn signal lever to select the maintenance item to be reset; Press and hold the information switch button to complete the reset. Introduction to the BMW X1: 1. Exterior: The front bumper design has been slightly adjusted for a more sporty appearance; The rear taillights feature a smoked treatment for a more premium visual effect, and even the base model adopts a dual-exhaust layout for better visual balance. 2. Features: The 17-inch wheels have been upgraded to 18-inch; The center console screen size has been increased from 6.5 inches to 8.8 inches with touch support; The ambient lighting has been upgraded from dual-color to 6-color; The headlights have been upgraded from halogen to LED sources.
11
3
Share

What functions does the Kia K5 center control screen have?

Kia K5 center control screen functions include tire pressure monitoring, remaining maintenance mileage, reverse camera, navigation, and media playback. Apart from the hybrid dial replacing the traditional tachometer dial, other designs of the Kia K5 are very minimalist, with a black and white screen that displays clearly. When coasting, the vehicle can enter the kinetic energy recovery phase, and the recovery speed increases during braking. The following are the functions of the Kia K5 center control screen: 1. When there is a problem with tire pressure, the tire pressure monitoring can show which tire is damaged. 2. The remaining mileage and time for maintenance can be displayed, allowing you to schedule time in advance. 3. When reversing out of a parking space, the blind spots on both sides at the rear are large, and the vehicle radar can detect and prompt in time. 4. After ignition, the seat will automatically reset, and when the engine is turned off, the seat can also automatically move back. If you are petite and do not need too much space, you can switch to a small range.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.