How many cylinders does the Cruze engine have?

1 Answers
VonSamuel
07/29/25 7:32pm
The Cruze engine has three cylinders, and it utilizes two types of three-cylinder engines: one is a 1.0-liter turbocharged engine, and the other is a 1.3-liter turbocharged engine. The 1.0-liter turbocharged engine of the Cruze has a maximum power output of 92 kW and a maximum torque of 170 Nm, while the 1.3-liter turbocharged engine delivers a maximum power of 120 kW and a maximum torque of 230 Nm. The Cruze is a compact sedan under the Chevrolet brand. In terms of body dimensions, it measures 4614 mm (4630 mm) in length, 1798 mm in width, and 1485 mm in height, with a wheelbase of 2640 mm.
Was this review help?
17
3
Share
More Forum Discussions

Is it mandatory to wear a seatbelt in the front passenger seat?

It is mandatory for the front passenger to wear a seatbelt while the vehicle is in motion. Traffic cameras at intersections will capture violations, and a fine of 50 RMB will be imposed if the front passenger is found not wearing a seatbelt, with no penalty points deducted. However, driving without a seatbelt will result in both a fine and penalty points. The details are as follows: 1. If the driver fails to wear a seatbelt as required while driving on a highway, a fine of 50 RMB and 2 penalty points will be imposed. 2. If the driver fails to wear a seatbelt as required while driving on an urban expressway, a fine of 50 RMB and 2 penalty points will be imposed. 3. If a passenger fails to wear a seatbelt as required while the vehicle is on a highway, a fine of 20 RMB will be imposed. 4. If the driver fails to wear a seatbelt as required while driving on roads other than highways or urban expressways, a fine of 50 RMB will be imposed, with no penalty points deducted.
17
0
Share

Can You Still Drive with a Fuel Tank Leak?

It is not advisable to continue driving if your car's fuel tank is leaking. Below are the relevant details about fuel tank leaks: 1. Causes of Leakage: Fuel leaks in cars are usually caused by overfilling the tank, which prevents excess fuel from burning off as vapor. Another common cause is improper installation during fuel filter replacement. Since the fuel filter is located under the car, it's possible for hoses to not be securely connected during replacement, leading to leaks underneath the vehicle. Additionally, if the fuel pump seal is not properly installed after refueling or if the fuel lines are damaged, leaks may occur, especially on rough roads. 2. Handling Methods: After all passengers exit the vehicle, do not close the doors—keep at least one door open to ensure proper ventilation and prevent high concentrations of gasoline vapors from causing accidents. Move away from the car and stand off the road, ensuring safety before calling for assistance.
2
4
Share

Can the ignition coil of Haval H6 be replaced by yourself?

Haval H6 ignition coil can be replaced by yourself, but it is necessary to ensure that the vehicle is turned off and cooled down before replacement. Here is the relevant introduction about the ignition coil: 1. The ignition coil, as the name suggests, is the most critical part of the engine's operation, providing power for the ignition step to ignite the compressed mixed fuel. The most obvious symptom of ignition coil failure is cylinder misfire. At idle, there may be a noticeable 'popping' sound, which is most obvious when feeling the exhaust pipe with your hand, accompanied by severe engine vibration. 2. Simply put, the ignition coil is the part that allows the spark plug to 'generate sparks' and ignite the mixed gas in the cylinder. In fact, it is a transformer responsible for converting the vehicle's low-voltage current into high-voltage electricity. Normally, each cylinder is equipped with a set of ignition coil and spark plug. The ignition coil generally needs to be replaced at 100,000 kilometers or even longer.
18
3
Share

How to reset the maintenance light on GAC Trumpchi GS8?

The specific steps to reset the maintenance light on GAC Trumpchi GS8 are as follows: 1. Turn off the ignition switch. Simultaneously press and hold the two arrow buttons, then turn on the ignition switch. 2. After about 3 seconds, release the two arrow buttons. The maintenance menu will appear, asking if you want to reset. 3. Press and hold the SET button for more than 3 seconds. Press the MODE button. Turn off the ignition switch to complete the reset. Below is an introduction to the maintenance light: 1. As driving time increases, the wear and tear on internal vehicle components gradually becomes more severe. To ensure normal operation of the car, manufacturers have set up some reminder indicator lights during production. After reaching a certain mileage, owners must promptly replace the components. After successful replacement, the car maintenance light also needs to be reset. 2. The function of the maintenance light is to record the usage mileage of some important components, much like a timer in a sprint race, serving to remind both the car owner and automotive maintenance personnel.
12
3
Share

What to Do When a Vehicle Runs Out of Battery?

Push-start the vehicle. Below are detailed instructions for dealing with a vehicle running out of battery: 1. Signs of a dead battery: The best way to prevent sudden battery failure is to pay attention to the 'distress signals' your vehicle normally emits. There are three main signs of insufficient battery power: first, the starter motor either doesn't turn or turns weakly, making it unable to start the engine; second, the headlights are dimmer than usual; third, the horn sounds weak or doesn't sound at all. 2. Methods to prevent battery drain: To minimize the vehicle's power consumption, avoid leaving lights on for extended periods when the engine is off. Even if the engine is running, if the vehicle is parked for a long time, turn off the power to unnecessary electrical devices (such as interior and exterior lights, audio systems, navigation systems, etc.).
15
3
Share

What Should You Pay Attention to When Driving at Night?

Turn on the lights, and in case of a breakdown at night, promptly place the warning sign. Below are specific instructions on precautions for driving at night: 1. Turn on the lights: Besides illumination, turning on the lights is to make other vehicles notice you. 2. Usage of lights: Do not use high beams when meeting other vehicles. Different lights also have functions beyond illumination; sometimes, you can use headlights to judge the distance between vehicles. If the distance is too close, it may cause reflection. (There are several situations to be cautious about: when passing through intersections, residential areas, or schools where there are many pedestrians and the lighting is not very bright, be sure to slow down, don't rush, safety is the most important.) 3. In case of a breakdown at night, promptly place the warning sign: At night, if your car breaks down on the road, the first step is to turn on the hazard lights and properly place the warning sign. The warning sign must be placed 150 meters behind the vehicle and under the lights to be more visible and safer.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.