How many cylinders does the Chevrolet Malibu XL engine have?

2 Answers
SanCody
07/24/25 10:23pm
The Chevrolet Malibu XL is equipped with a 4-cylinder engine, which functions by converting the thermal energy of gasoline into mechanical energy through the combustion and expansion of gases within sealed cylinders, thereby driving the pistons to perform work. Taking the 2021 Chevrolet Malibu XL as an example, it belongs to the midsize car category with body dimensions of 4933mm in length, 1854mm in width, and 1472mm in height, a wheelbase of 2829mm, a fuel tank capacity of 55 liters, and a curb weight of 1430kg. The 2021 Chevrolet Malibu XL features a front MacPherson independent suspension and a rear multi-link independent suspension. It is powered by a 1.5L turbocharged engine delivering a maximum horsepower of 169ps, a maximum power of 124kW, and a peak torque of 250Nm, paired with a 9-speed automatic transmission.
Was this review help?
3
4
Share
OLayla
08/10/25 3:00pm
I've driven several Chevrolet models, and the Malibu XL is my daily driver. It's equipped with a 4-cylinder engine, which runs smoothly and is fuel-efficient. It's quick to start and accelerates without hesitation, making it perfect for navigating through city traffic, especially in congested conditions. The average fuel consumption is around 7L, much lower than those big V6 engines, saving me a lot on gas. It also performs well on long trips, with minimal engine noise and vibration, and remains stable at high speeds. Maintenance is straightforward—replacing spark plugs and oil is affordable, and over the years, repair costs have been minimal. Compared to my colleague's V6 car, it might lack a bit of punch at the start, but it's more than enough for daily errands like grocery shopping and picking up the kids, plus it's eco-friendly and reduces carbon emissions. If you're looking for a cost-effective driving experience, this setup is truly a bargain, and I highly recommend it for commuters.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

How to Replace a Lost Car Mechanical Key?

Replacing a car key can be done at a 4S shop, repair shop, auto parts market, or professional locksmith company. The specific details are as follows: At a 4S Shop: Getting a car key replaced at a 4S shop is the safest method. The process involves sending the vehicle's frame number, engine model, and other data to the car manufacturer. After confirming the key chip content, the manufacturer sends it back to the 4S shop, which then uses diagnostic equipment to match the key with the engine computer. However, this method is time-consuming and expensive, taking anywhere from a week to a month, and the cost increases with the car's level of advancement. At a Repair Shop: Generally, most repair shops do not offer car key replacement services because it requires specialized equipment and data. They can only handle a few simple car models. Auto Parts Market or Professional Locksmith Company: The advantage of these options is that they save time, effort, and money. In cases where all keys are lost, most cars can be processed in about two hours, and the cost is naturally much cheaper than at a 4S shop.
19
2
Share

Is it necessary to depress the clutch when starting a vehicle?

Starting a vehicle requires depressing the clutch pedal. The primary purpose of depressing the clutch is to prevent the car from suddenly lurching forward during startup, which could lead to accidents. This is especially crucial when starting on uphill or downhill slopes, where depressing the clutch is mandatory. Engaging the clutch during startup also protects the engine. If the clutch is not depressed, the engine may operate under excessive load, potentially causing damage. The clutch is a common component in mechanical transmissions, allowing the drivetrain to be disengaged or engaged as needed. Its fundamental requirements include smooth engagement, quick and complete disengagement, ease of adjustment and repair, compact size, lightweight, good wear resistance, sufficient heat dissipation capacity, and effortless operation. Common types include jaw clutches and friction clutches.
13
1
Share

What Causes the Steering Wheel to Make Noise When Turning Right?

The steering wheel making noise when turning right may be due to damaged pressure bearings or insufficient power steering fluid. The specific causes and solutions are as follows: Damaged Pressure Bearings: Pressure bearings maintain a flexible connection between the vehicle body and suspension, helping to filter out vibrations from uneven road surfaces during driving and reducing impact on the bearings and body. If the pressure bearings are damaged, the steering wheel may produce unusual noises. Solution: Replace the pressure bearings. Insufficient Power Steering Fluid: Low power steering fluid can make steering more difficult and may cause noise. Solution: Replace the power steering fluid.
3
0
Share

Does the Bentley Continental have a W12 engine?

The Bentley Continental is available with a W12 engine, but there are also models equipped with a V8 engine. The Continental's V8 engine has a displacement of 4.0 liters and is a twin-turbocharged engine, delivering a maximum power of 404 kW and a maximum torque of 770 Nm. The Continental's W12 engine is also a twin-turbocharged engine, producing a maximum power of 467 kW and a maximum torque of 900 Nm. The Continental's body dimensions are 4850 mm in length, 1954 mm in width, and 1405 mm in height, with a wheelbase of 2851 mm. The Continental features a front-engine, all-wheel-drive layout with a full-time four-wheel-drive system. The front suspension is a double-wishbone independent suspension, and the rear suspension is a multi-link independent suspension.
12
1
Share

What to Do When the Car Windshield Freezes?

Solutions for a frozen car windshield: 1. Drive the car for a few minutes and use the warm air to blow on the windshield, allowing the ice to melt naturally; 2. Pour lukewarm water (not scalding) to quickly remove the ice; 3. Park the car in a sunny spot to let the ice thaw. Car windshields are divided into laminated glass and tempered glass. Laminated glass involves placing a transparent adhesive plastic film between two or three layers of glass, combining the toughness of the plastic with the hardness of the glass to enhance the glass's resistance to breaking. Tempered glass is made by quenching ordinary glass to create internal stresses, thereby strengthening the glass. When impacted and broken, tempered glass shatters into small, blunt-edged fragments.
6
2
Share

What are the steps to turn on the air conditioning in an Accord?

The steps to turn on the air conditioning in an Accord are: Start the car and wait for the engine speed to stabilize, then press the AC button or a button with a snowflake symbol. Next, turn the rotary knob to the blue position to activate the cold air. After that, adjust the blower's airflow to control the intensity of the cold air. The Accord is a model under Honda, with body dimensions of 4930mm in length, 1845mm in width, and 1470mm in height, a wheelbase of 2775mm, and a fuel tank capacity of 65L. The Accord is equipped with a 1.5T turbocharged engine, while the hybrid version uses the third-generation iMMD hybrid system.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.