How Many Cylinders Does the Changan CS55 Engine Have?

2 Answers
Victor
07/29/25 4:09pm
2019 Changan CS55 models are all equipped with a 1.5-liter turbocharged four-cylinder engine. The Changan CS55 is a compact SUV. Here are the relevant details: 1. The 1.5-liter turbocharged engine in the Changan CS55 has a maximum power of 115 kW, a maximum torque of 225 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed ranging from 2000 to 4000 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 6-speed manual transmission or a 6-speed automatic transmission. 2. The front suspension of the CS55 uses a MacPherson strut independent suspension, while the rear suspension employs a multi-link independent suspension.
Was this review help?
16
3
Share
AbelLee
08/15/25 4:35am
I recently tested the Changan CS55 SUV, which features a four-cylinder engine, specifically a 1.5-liter turbocharged version. The four-cylinder engine strikes an excellent balance between fuel consumption and performance. It provides smooth starts in daily driving, powerful acceleration on highways, and decent noise control without the noticeable vibrations typical of three-cylinder engines. The turbo kicks in quickly, delivering direct power response, though there is a slight jerk at low speeds. Overall, it meets the needs of family use well. In terms of fuel consumption, it averages around 8L in urban areas and drops to 6L on highways, making it economical for long-term use. Currently, SUVs commonly use four-cylinder engines because they are lighter and more fuel-efficient than six-cylinder ones, while being more stable and reliable than three-cylinder engines.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

What to Do When a Car Engine Gets Submerged in Water?

This article introduces the situation of a car engine getting submerged in water from three aspects. Below are the handling methods for a submerged car engine: 1. Driving: Do not restart the engine after it stalls. Be very cautious about the depth of road surface water while driving. If the water depth exceeds 20 centimeters (some high-clearance models like SUVs can pass through water up to 30 centimeters deep), do not attempt to drive through. This is especially important for older models, as their lower air intake and exhaust ports can cause water to be sucked back into the engine through the exhaust pipe, leading to stalling. 2. Parking: Understand the drainage situation of the parking area in advance. If water levels are rising, seek help from several passersby to push the car to a water-free area and wait for a tow truck. 3. Repair: After water submersion, the entire vehicle's wiring needs inspection. First, check the electrical circuits, as muddy water is an excellent conductor and can cause short circuits when it comes into contact with wiring. Next, inspect whether the braking system has been compromised by water. Due to the strong absorption capability of the braking system, water can easily enter the brake fluid, affecting braking performance and potentially leading to brake failure in severe cases. It is recommended to have the vehicle inspected at a professional repair shop.
5
1
Share

What are the reasons for hitting the left line during parallel parking?

Reasons for hitting the left line during parallel parking: 1. Technical reasons: When reversing from the right to the center, hitting the left line is due to turning the steering wheel too late. If reversing from the left to the center, hitting the left line is due to turning the steering wheel too early. 2. Other reasons: (1) Issues with reference points: The reference points in the driving school practice area and the test site cannot be exactly the same. If you rigidly memorize certain points to turn the steering wheel fully, etc., you won't know how to make slight adjustments when facing a slightly different test site. (2) Vehicle issues: Unlike the driving school's training car, the test car requires you to adjust the seat, mirrors, etc., and get used to the clutch. Additionally, due to wear and tear, the height of the wiper line, which is a key reference point, will definitely not be consistent with that during practice, indirectly leading to inaccurate reference point alignment.
7
5
Share

How is the BYD grading system divided?

BYD is divided into nine major levels: A, B, C, D, E, F, G, H, and I. Each major level is further divided into three sub-levels. A represents the president, B represents vice presidents and chief engineers, C represents heads of business divisions, D represents department managers, E represents section chiefs, F and G represent engineers, H represents technical staff, and I represents general workers. More details about BYD's grading system are as follows: 1. 211 university graduates: 3-month probation period, level 1 or above. 2. Non-211 university graduates: 1-year probation period, F12 level, meaning 12 months without performance-based salary. 3. University graduates without a CET-4 certificate: Treated as college graduates, G1 level, with a probation period of 3 months or 1 year, determined by leadership.
18
1
Share

What Are the Solutions for a Diesel Vehicle That Won't Start?

Diesel engine not starting solutions are as follows: 1. Check and clean the air filter for blockages, as a clogged air filter can obstruct engine airflow and affect ignition. 2. Inspect the spark plugs; their performance directly impacts the vehicle's overall operation and efficiency. 3. Verify if there is fuel in the high-pressure line. If there is no fuel, check for fuel line blockages or fuel pump malfunctions. If fuel is present, examine the injector's atomization performance. 4. In winter, diesel vehicles may fail to start due to wax solidification in diesel fuel at low temperatures, reducing fluidity. Solutions include heating the diesel to restore fluidity or switching to appropriate diesel grades in advance. For older diesel vehicles, when the ambient temperature is around 0°C, it is recommended to switch to -10 diesel; when the temperature drops below -5°C, use -20 diesel; and for even lower temperatures, switch to -30 diesel.
6
4
Share

How to Turn Off Buick SYNC?

Buick GL8's SYNC function is a multi-zone climate control feature that doesn't require manual deactivation. This function automatically disables when passengers in other zones adjust their own air conditioning settings, and only reactivates when the driver needs to operate temperature adjustments for other zones by pressing the button. Below are relevant details about dual-zone automatic climate control: 1. SYNC refers to the synchronization button for dual-zone automatic climate control. When the button light is on, both sides of the vehicle's air vents maintain the same temperature with synchronized adjustments - changing one side's temperature affects both vents equally. 2. Dual-zone automatic climate control features two independent temperature zones, allowing separate temperature regulation for left and right front seating areas. Vehicles equipped with this system can accommodate different temperature preferences for occupants in two positions, enabling free adjustment between temperature differentials.
7
0
Share

Why does the Buick Excelle keep triggering false alarms?

Reasons for frequent false alarms in Buick Excelle: 1. Overly sensitive settings in the built-in anti-theft system. 2. Loose sensors under the hood. 3. Possible short circuits in wiring, or issues like worn control key contacts or weak springs. 4. Problems with the two small buttons near the front hood - try tightening the hood upwards. 5. Damaged door sensor button on the driver's side, which may require replacement at a 4S shop. 6. Malfunctioning alarm system - deactivate it temporarily to identify and troubleshoot the root cause. The quickest and most effective solution is to visit an authorized service center for diagnosis and repair. Below are specific troubleshooting methods: 1. Open the hood and locate the black rubber door control trigger switch near the left headlight. Use double-sided tape to thicken the contact area between the switch and hood, reducing its travel distance. 2. Use automotive diagnostic equipment to read fault codes and address issues accordingly. 3. Visit a service station where the TECH2 tool's special function can pinpoint the exact source of anti-theft alerts, allowing technicians to perform repairs based on computer data.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.