How Many Cylinders Does the Borui Engine Have?

1 Answers
VanAbigail
07/30/25 6:08am
Borui has both three-cylinder and four-cylinder versions. Additional information: Borui uses two types of engines: 1. 1.5-liter turbocharged engine: The 1.5-liter turbocharged three-cylinder engine has a maximum power of 132 kW and a maximum torque of 265 Nm. The maximum power speed of this engine is 5500 rpm, and the maximum torque speed ranges from 1500 to 4000 rpm. This engine is equipped with a 48V mild hybrid system and direct fuel injection technology, and it uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 2. 1.8-liter turbocharged engine: The 1.8-liter turbocharged engine delivers 184 horsepower and a maximum torque of 300 Nm. The maximum power speed of this engine is 5500 rpm, and the maximum torque speed ranges from 1750 to 4000 rpm. This engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and a cast iron cylinder block.
Was this review help?
3
5
Share
More Forum Discussions

What Causes Moisture Inside the Car?

Moisture inside the car occurs because the outside weather is somewhat cold while the interior temperature is slightly higher, leading to condensation. Here are some moisture prevention tips: Essential desiccants and bamboo charcoal: If you find it troublesome to turn on the AC every time and the weather is still relatively cold, you can place desiccants or bamboo charcoal in areas prone to moisture accumulation, such as the car interior and trunk. However, note that these items need regular replacement and should be removed when no longer needed. Professional disinfection: Damp weather easily breeds bacteria, especially during special periods, making disinfection essential. Pay extra attention to cleaning commonly overlooked areas like air vents and seat corners. Utilize the sunroof more: If your car is equipped with a sunroof, open it frequently while driving to circulate air and maintain ventilation inside the vehicle. Note that you should avoid opening side windows simultaneously with the sunroof, as this would compromise optimal air exchange efficiency.
17
0
Share

What is the reason for the occasional black screen on the Audi A6 display?

Audi A6 display black screen reasons are as follows: 1. Poor line contact. It is necessary to check whether there is a loose connection in the line in time, and connect the loose part properly. 2. The power signal line is aging, you can try to replace it with a new one. 3. The screen has been used for too long, resulting in a failure of the power supply module. It is recommended to go to the 4S shop for inspection or replacement of the power supply module. 4. There is a defect in the circuit design. This is beyond the scope of your own ability to solve, so you need to go to the repair shop for inspection and repair or direct replacement. If it is under warranty, go for warranty; if it is not under warranty, go directly to the 4S shop for inspection and repair.
3
5
Share

Do New Energy Vehicles Really Have Radiation?

New energy vehicles do have radiation. More relevant information is as follows: 1. Electromagnetic radiation below 100 Tesla will not cause harm to the human body. According to tests, the radiation from commonly used household items includes: laptops at 10.69 Tesla, mobile phones while watching videos at 18.37 Tesla, the back of a hair dryer at 9.32 Tesla, power strips at 2.97 Tesla, and microwave oven panels at 19.78 Tesla. The radiation from these household appliances during operation is far below the alert threshold set by the World Health Organization, so daily use of these devices for work, entertainment, and living poses no harm to human health. 2. Taking common new energy vehicles as an example, tests on the electromagnetic field radiation of charging piles show that the electromagnetic radiation during operation is approximately 4 to 5 Tesla, while the radiation from the charging gun head and the vehicle's charging port is about 5 to 6 Tesla. During driving, the average radiation values are generally below 4 Tesla, with the radiation levels being related to parameters such as battery capacity and driving range.
20
2
Share

Should I Refuel When There Are Two Bars of Fuel Left?

You can refuel when there are two bars of fuel left; don't wait until the fuel tank warning light comes on. Precautions for refueling a car: Avoid overfilling: If the tank is overfilled, gasoline may overflow through the vent hole, which can lead to spontaneous combustion if exposed to an open flame, with unimaginable consequences. Additionally, gasoline overflowing through the vent hole may drip onto the car body, causing some corrosion. Refuel in advance: While driving, always pay attention to the fuel gauge. When the indicator shows a quarter of the fuel remaining, you should go to refuel. It's best not to wait until the fuel gauge light comes on before refueling. Modern cars use an electronic fuel pump, which requires gasoline for lubrication and cooling. If you frequently wait until the fuel light comes on to refuel, the fuel pump may not receive adequate lubrication and cooling, ultimately reducing its lifespan.
7
0
Share

How to Reset the Tire Pressure Warning on a Sagitar?

First, restore the tire pressure to the normal level; start the vehicle; find the tire option on the central control screen and press the reset button. If the tire is damaged, it needs to be replaced. The following describes the replacement method: 1. First, park the vehicle on a level road. If on the road, place a safety warning sign behind the vehicle, then loosen all the tire nuts. When removing the nuts, loosen them diagonally to avoid uneven force distribution on the wheel hub. 2. Place the jack directly under the support point, then slowly adjust the jack to raise the chassis. Once the tire is off the ground, it can be removed. 3. Position the new tire in place, then slowly lower the vehicle. Tighten the nuts with a special tool, ensuring to use the diagonal tightening method. The tightening operation should be performed when the wheel touches the ground.
16
3
Share

How to Upgrade the In-Car Multimedia System?

To upgrade the in-car multimedia system, first determine whether the system is factory-installed or aftermarket. If it's aftermarket, download the required system program onto a USB drive, then upgrade the system via the interface without interrupting the power supply. Additional details are as follows: 1. In-car multimedia systems in vehicles are divided into two types: one is factory-installed, and the other is aftermarket. The upgrade methods for these two systems differ. The factory-installed multimedia system can only be upgraded at an authorized 4S shop for system map updates. The aftermarket multimedia system can be upgraded simply via USB transfer. 2. During the upgrade, note that some vehicle models have a dedicated USB cable for the host unit, which is not universal across all models. During the upgrade process, the central control interface will display a 'Connecting for Upgrade' message—do not disconnect the power. Power interruption may cause upgrade errors, which can be troublesome. After the upgrade is complete, restart the vehicle to access the upgraded interface.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.