How many cylinders does the BMW X3 engine have?

1 Answers
DianaLee
07/29/25 3:12pm
The BMW X3 uses a four-cylinder engine. This vehicle is equipped with three different engines in total: a low-power version 2.0-liter turbocharged engine, a medium-power version 2.0-liter turbocharged engine, and a high-power version 2.0-liter turbocharged engine. The BMW X3 is an SUV model. In terms of power, the BMW X3 is equipped with a B48-type 2.0T engine, with three different power outputs depending on the model: 184 horsepower (xDrive25i), 224 horsepower (xDrive28i), and 252 horsepower (xDrive30i). The transmission system is matched with an 8-speed automatic transmission, and the xDrive four-wheel-drive system is standard across all models.
Was this review help?
9
5
Share
More Forum Discussions

How to reset the maintenance reminder for the 2011 Lavida?

To reset the maintenance reminder for the 2011 Lavida, simply press the maintenance reset button located on the lower right side of the dashboard. The 2011 Lavida is a compact SUV with the following dimensions: length 4608mm, width 1743mm, height 1465mm, wheelbase 2610mm, fuel tank capacity 55L, and curb weight 1245kg. It features a MacPherson strut front suspension and a torsion beam rear suspension. The vehicle is powered by a 1.6L naturally aspirated engine, delivering a maximum horsepower of 105PS, maximum power of 77kW, and maximum torque of 155Nm, paired with a 5-speed manual transmission.
2
5
Share

What is the replacement interval for belts?

The replacement interval for belts is between 60,000 to 80,000 kilometers. When the vehicle exceeds 50,000 kilometers, the timing belt should be inspected to promptly identify any abnormal conditions. The function of automotive engine belts: Transmit the crankshaft's force to drive components such as the water pump and alternator. Steps for replacing automotive engine belts: 1. Lift the car with a jack; 2. Remove the engine undercover; 3. After removing the undercover, the alternator belt becomes visible; 4. Remove the exposed old alternator belt; 5. Install a new engine belt; 6. The engine belt replacement is complete.
18
3
Share

Do You Need to Press the Brake When Starting an Automatic Car?

Automatic cars require the brake to be pressed when starting to prevent the car from lurching or rolling during ignition. Situations where the brake needs to be pressed in an automatic car: 1. Shifting from P to other gears requires pressing the brake; 2. Shifting from N to D or R requires pressing the brake. Precautions for shifting gears in an automatic car: 1. Ensure the gear is in N or P before starting, and remember to press the brake during ignition; 2. Gear shifting should be timely, accurate, decisive, and quick—avoid hesitation; 3. Upshift after accelerating, downshift after decelerating; 4. Use D gear for driving on flat roads; 5. No need to press the shift button when switching between N, D, and 3 gears.
17
0
Share

How to set the time on the Corolla dashboard?

Method to set the time on the Corolla dashboard: First, locate the two protruding buttons on the Corolla dashboard. To adjust the time, use the left button. Press and hold the button, and the hour will start flashing. At this point, you can adjust the hour. Then press and hold the button again, and the minutes will flash, allowing you to adjust the minutes. Once the minutes are set, you're done. The Corolla is a car model under Toyota, with body dimensions of 4630mm in length, 1775mm in width, and 1480mm in height, and a wheelbase of 2700mm. In terms of interior, the Corolla features a simple overall style, a conventional center console design, spacious and comfortable seats, effective air conditioning, and good craftsmanship.
1
4
Share

Where is the memory card installed in the Trumpchi GS4?

The memory card in the Trumpchi GS4 is installed under the front passenger seat cushion. Below is relevant information about the dash cam recognizing the memory card: Damaged memory card: If the memory card is damaged and cannot store data, the dash cam will fail to recognize it during detection and will stop working. Solution: Replace the memory card for testing. Faulty card reader or peripheral components: Oxidation of the metal contacts inside the card reader may cause poor contact with the memory card; a damaged card reader may fail to read the memory card; damaged components in the card reader's peripheral circuit may interrupt power supply or signal transmission.
4
2
Share

How to Turn on the High Beam in a Corolla?

Method to turn on the high beam in a Corolla: When the low beam is on, push the light lever forward to activate the high beam. Pull the lever back to the middle position to turn off the high beam. Pull the lever toward yourself once to flash the high beam. The Corolla, formerly known as the 'Corolla' in Chinese, is a brand under Toyota. Its body dimensions are 4630mm in length, 1775mm in width, and 1480mm in height, with a wheelbase of 2700mm. In terms of exterior design, the Corolla features a balanced and dignified appearance, with no particularly striking highlights, making it well-suited for family use. The interior adopts a simple overall style, with a conventional dashboard design, spacious and comfortable seats, effective air conditioning, and good craftsmanship.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.