How many cylinders does the BJ40 engine have?

1 Answers
ClaireFitz
07/29/25 5:15pm
The BJ40 is equipped with a four-cylinder engine. This model uses two types of engines: one is a 2.0-liter turbocharged diesel engine, and the other is a 2.3-liter turbocharged gasoline engine. Below is more information about this vehicle: 1. The 2.0-liter turbocharged diesel engine delivers a maximum power of 150 horsepower and a maximum torque of 350 Nm; the 2.3-liter turbocharged gasoline engine has a maximum power of 170 kW and a maximum torque of 345 Nm. The BJ40 is positioned as a rugged SUV. 2. In terms of body dimensions, the BJ40 measures 4350mm in length, 1843mm in width, and 1837mm in height, with a wheelbase of 2450mm. The BJ40 is equipped with a part-time four-wheel-drive system, uses a solid axle suspension, and features a body-on-frame design.
Was this review help?
3
2
Share
More Forum Discussions

What does it mean when the engine light comes on in a car?

There are two scenarios when the engine light comes on in a car. If the yellow engine light is on, it indicates that there is an issue with a certain part of the vehicle, but it is not too serious and the car can still be driven. In this case, you should drive to the nearest auto repair shop or 4S store as soon as possible for inspection and repair. If the red engine light is on, it means the problem is very serious, and you must stop the car immediately and not continue driving. If the warning light is on but there are no abnormal driving conditions, it may just be a sensor malfunction or a false fault. In this case, you can continue driving temporarily, but you should drive at low to medium speeds and immediately head to a repair shop for inspection. If the engine warning light comes on and the vehicle can still be driven but exhibits severe shaking, lack of acceleration, or other symptoms, it is not recommended to continue driving. Instead, you should call for help and wait for assistance.
2
5
Share

What are the effects of high engine intake air temperature?

The effects of high engine intake air temperature: 1. Excessive temperature of components can significantly reduce the mechanical properties of metal materials, leading to deformation and damage; 2. The normal gaps between various components will be disrupted due to thermal expansion of parts, preventing them from functioning properly; 3. It can cause engine oil viscosity to become thinner or even oxidize and deteriorate, reducing lubrication effectiveness and accelerating component wear; 4. The air charge in the cylinders decreases, resulting in reduced engine power. In gasoline engines, detonation may also occur. The normal operating temperature range for an automotive engine is between 85 to 105 degrees Celsius. Below 85 degrees, gasoline atomization is poor, lubricating oil flow is inadequate, and the engine is prone to wear and poor performance; above 105 degrees, the engine is susceptible to overheating; boiling may occur at temperatures above 110 degrees.
7
5
Share

What is the oil specification for the Honda Vezel?

Honda Vezel uses 0W20 specification engine oil. Below is additional information: Introduction to Honda Vezel oil usage: After 150,000 kilometers, 0W30 specification oil can be used. If frequent aggressive driving occurs, 0W30 specification oil can be directly used. Introduction to Honda Vezel: The Honda Vezel is Guangqi Honda's first SUV model, with body dimensions of 4294mm in length, 1772mm in width, 1605mm in height, and a wheelbase of 2610mm. The Vezel features a wing-shaped front grille design that integrates the grille with the headlight assembly. The LED headlights adopt dual-lamp positioning and combine with arc-shaped LED daytime running lights.
18
4
Share

Do Hybrid Vehicles Count as New Energy Vehicles?

Hybrid vehicles are considered new energy vehicles. Here is the extended content: Introduction to Hybrid Vehicles: They include hybrid electric vehicles, pure electric vehicles, fuel cell vehicles, hydrogen engine vehicles, as well as gas vehicles and alcohol ether vehicles. Hybrid electric vehicles combine fuel (gasoline, diesel) and electric energy, utilizing an electric motor as an auxiliary power source to drive the vehicle, representing a technology of complementary advantages. The primary power source of hybrid electric vehicles is the engine, supplemented by a secondary power source—the battery. The combination of these two sources enhances energy efficiency, and the electric motor assisting the engine can generate powerful and smooth driving force during normal operation. Advantages of Hybrid Vehicles: Hybrid vehicles offer high fuel efficiency and superior driving performance. Since they use fuel for the engine and benefit from the assistance of an electric motor during startup and acceleration, they consume less fuel. Simply put, compared to vehicles of the same size, hybrid vehicles incur lower fuel costs.
7
3
Share

Which Cars Have Run-Flat Tires?

Cars equipped with run-flat tires include: BMW, Volvo S60, Ford S-MAX, Volkswagen R36, Mercedes-Benz, Audi, and similar models. Run-flat tires are technically known as "Tire Pressure Monitoring System" tires, abbreviated as RSC. The inflated tire sidewall is the main part that supports the vehicle's weight, especially for tires with a larger aspect ratio, where the sidewall is very thick. In the event of a severe tire blowout, the sidewall can instantly collapse, causing the tire to lose support immediately and resulting in an abrupt change in the vehicle's center of gravity. This is particularly dangerous for front-wheel-drive vehicles if the front tire blows out, as the sudden shift in the center of gravity can easily lead to loss of control. The run-flat tire consists of an outer tire, a standard inner tube, a spare inner tube, a steel rim, a gas generator, a pressure sensor, and a control unit.
4
3
Share

How to Determine the Position of Left and Right Wheels?

Methods to determine the position of left and right wheels: 1. When the vehicle is driving normally in its lane, if the ground centerline overlaps with the left wiper nozzle on the hood, the left wheel will be on the centerline; 2. When the vehicle is driving normally in its lane, if the ground centerline overlaps with the right wiper nozzle on the hood, the right wheel will be on the centerline. Methods to judge the distance to the car in front: 1. When the driver sees the upper edge of the front car's bumper from the lower edge of the windshield, it indicates that the distance to the front car is only one meter, and the driver needs to control the distance; 2. When the driver sees the lower edge of the front car's bumper from the lower edge of the windshield, it indicates that the distance to the front car is two meters; 3. When the driver sees the lower edge of the front car's rear tire from the lower edge of the windshield, it indicates that the distance to the front car is approximately three meters.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.