How many cylinders does the Bestune T77 have?

Steps for Removing and Installing the Air Filter for the 2020 A6L

Regarding the removal and installation of the air filter for the A6L, there are seven steps as follows: 1. First, open the glove compartment cover located behind the front passenger seat. 2. Locate the fixing clip on the right side of the glove compartment and pull it outward firmly. 3. Remove the fixing clip of the glove compartment cover to detach it. 4. Use both hands to squeeze the sides of the glove compartment inward to take it off. 5. After removing the glove compartment, you will see the air filter cover. Press the fixing clips on both sides of the cover firmly to remove it. 6. Pull the old air filter outward. 7. Insert the new air filter and restore everything to its original position in the reverse order of removal (pay attention to the installation direction of the air filter).

3

Share

Why was the Yusheng S350 discontinued?

The Yusheng S350 has not been discontinued. Below is a related introduction to the Yusheng S350: 1. In terms of appearance, the Jiangling Yusheng S350's front face, adorned with rugged lower surrounds and large headlights, exudes a strong sense of power, making it very attractive. Paired with a wide body design, it aptly highlights the reliability of the Yusheng S350 as a hardcore SUV. 2. The rear design, much like the front, is very steady, aligning well with the aesthetic preferences of most consumers. In comparison, the Nissan Terra is relatively simpler, with LED headlights that offer excellent low-beam effects, though the high beams are somewhat scattered and don't illuminate as far. 3. The Jiangling Yusheng S350 is equipped with BorgWarner's TOD on-demand four-wheel-drive system. The ECU of this system can continuously calculate the optimal torque distribution ratio between the front and rear axles based on the driver's operational intent and the vehicle's road conditions, automatically distributing torque accordingly. 4. The Jiangling Yusheng S350 also comes with an Eaton mechanical rear differential lock. When there's a significant speed difference between the left and right wheels, the Eaton differential lock can automatically lock both wheels, enhancing the vehicle's safety in rain, snow, and various complex road conditions, while also lowering the driving threshold for off-road beginners.

8

0

Share

How to Use the Grand Cherokee 4WD System?

The Grand Cherokee 4WD is electronically controlled and does not require manual operation. Simply activate the 4WD system by pulling the 4WD mode switch located in the center console to engage 4WD mode. The Jeep Grand Cherokee's full-time 4WD system can comprehensively adapt to various road conditions. Introduction to the Grand Cherokee 4WD system: 1. The Grand Cherokee 4WD system is the Quadra-Trac II full-time 4WD. 2. It features a multi-plate clutch-type limited-slip differential at the center, with each wheel achieving lock through electronic assistance. 3. The transfer case includes a torque amplification gear, providing greater torque when needed to ensure the vehicle's self-recovery capability.

18

5

Share

How to Activate Cruise Control on the Sagitar?

The cruise control switch for the Sagitar is located on the left stalk of the steering column. When the vehicle is stationary or in motion, turn the cruise switch from OFF to ON. At this point, a green cruise control icon will appear on the speedometer, indicating that the cruise function is activated. Press the SET/- area of button A to control the speed. Cruise control function: When the cruise control button is pressed, the car will maintain the set speed. Depressing the brake pedal will immediately deactivate this function. In addition to using the brake pedal to deactivate, there are other deactivation methods such as the parking brake, clutch (M/T), and speed adjustment lever (A/T). How to use cruise control: 1. Turn on GRA. Move switch B to the ON position. The system is activated, but no speed is stored or regulated yet. 2. Activate GRA. Press the SET/- area of button A. The current speed is stored as the cruising speed and the speed is controlled. 3. Temporarily deactivate GRA adjustment. Move switch B to the CANCEL position. Alternatively: Depress the brake pedal or clutch pedal. The speed control function is temporarily deactivated. The set speed remains stored in memory. 4. Reactivate GRA adjustment. Press the SET+ area of button A. The stored speed is recalled and the speed is controlled. 5. Turn off GRA. Move switch B to the OFF position. The system is turned off. The stored speed is deleted.

9

1

Share

How to align the timing of the new Santana?

New Santana timing method: 1. Align the crankshaft according to the marks on the crankshaft timing pulley, generally requiring the No. 1 cylinder piston to be at top dead center position. 2. Install the camshaft timing pulley marks to align the camshaft, with dual camshafts aligning both camshaft positions respectively. 3. Install the timing belt/chain properly. Below are detailed instructions: The engine timing gears only have marks on the camshaft gear, with no marks on the other gears. First, rotate the engine to bring cylinders 1 and 6 to top dead center. Then assemble all gears except the camshaft gear, observing the marks on the engine block to align the camshaft gear mark with this mark. Next, rotate the engine to about 22 degrees before top dead center, adjust the fuel injection pump to the state where the No. 1 cylinder just starts to discharge fuel, and tighten the screws.

13

2

Share

Do National IV vehicles have three-way catalytic converters?

National IV vehicles have three-way catalytic converters. Definition of three-way catalytic converter: The three-way catalytic converter is the most important external purification device installed in the automobile exhaust system. It can convert harmful gases such as CO, HC, and NOx emitted by automobile exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction. Principle of three-way catalytic converter: When high-temperature automobile exhaust passes through the purification device, the purifying agent in the three-way catalytic converter will enhance the activity of the three gases CO, HC, and NOx, promoting certain oxidation-reduction chemical reactions, among which CO is oxidized into colorless at high temperature.

16

3

Share

How many cylinders does the Bestune T77 have?

Steps for Removing and Installing the Air Filter for the 2020 A6L

Why was the Yusheng S350 discontinued?

How to Use the Grand Cherokee 4WD System?

How to Activate Cruise Control on the Sagitar?

How to align the timing of the new Santana?

Do National IV vehicles have three-way catalytic converters?

Severe Jerking in First Gear with Volkswagen DSG?

Geely 7-Speed Dual Clutch Transmission Review?

What is the small black stick on the dashboard of the 10th-generation Civic for?

How to Activate the Horn Sound When Locking a Volkswagen?