How many cylinders does the 2019 Buick Excelle have?

3 Answers
McDakota
07/29/25 9:19am
2019 Buick Excelle has three cylinders. The 2019 Buick Excelle is equipped with a three-cylinder engine. Here are the specific details about the Buick Excelle: 1. The Buick Excelle is a compact sedan launched by Buick. The newly redesigned model no longer uses a four-cylinder engine but instead adopts a new three-cylinder engine. 2. In terms of power, the car is equipped with 1.0T and 1.3T turbocharged engines. The 1.0T engine has a maximum power of 92 kW and a maximum torque of 170 Nm, while the 1.3T engine has a maximum power of 120 kW and a maximum torque of 230 Nm. The transmission system is paired with either a 6-speed dual-clutch transmission or a 6-speed automatic transmission. Since both engines are small-displacement turbocharged engines, they utilize Ecotec dual-injection turbocharging technology. During operation, the engines can deliver maximum torque at 1500-5200 rpm, offering superior performance compared to the engines used in the previous generation models.
Was this review help?
20
2
Share
VonCarlos
08/12/25 9:27am
As an average car owner, my 2019 Buick Excelle is equipped with a 1.3T three-cylinder engine—yes, just three cylinders. It drives quite smoothly with ample acceleration power, and the city fuel consumption is just over 6 liters, making it both fuel-efficient and cost-effective. Some people immediately worry about vibrations when they hear 'three-cylinder,' but Buick has employed advanced balancing technology, so the vibrations are minimal and hardly noticeable during daily driving. The cabin space is quite spacious, making it practical for family outings, and the trunk can hold a decent amount of luggage. I chose it primarily for its affordability—the price is reasonable, and maintenance is straightforward, unlike luxury cars that can be more complicated. In city traffic, the engine responds quickly, lane changes feel nimble, and even beginners can drive it with ease. If you're considering this car, don’t let the fewer cylinders scare you—the real-world experience is very reliable.
Was this review help?
18
4
Share
Expand All
HenryLynn
10/06/25 5:06am
I'm a tech enthusiast. The 2019 Buick Excelle is equipped with a 1.0T or 1.3T three-cylinder engine, totaling three cylinders. This design is lightweight, compact, and improves fuel efficiency, with an average fuel consumption 10% lower than four-cylinder engines. For vibration control, it uses a balance shaft and optimized ignition system, delivering good results, and the power output of 163 horsepower is sufficient. This engine meets the China VI emission standards, earning environmental points, and is also more cost-effective. Compared to the older four-cylinder engines, it's quieter and more energy-efficient. The downside? There might be slight vibrations during prolonged high-speed driving, but most people won't notice. Buick positions this car as practical, with simple maintenance, suitable for buyers who value technology.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

How to Set Up the Automatic Locking Function?

To set up the automatic locking function, follow these steps: shift the gear to P position, turn the key to the ON position, close all four doors, and press the lock button. You will see the hazard warning lights on the dashboard flash twice to confirm the setup. Below is an introduction to the automatic locking function: Function: The automatic locking feature serves as an anti-theft measure. It quickly locks the doors after driving, preventing door-pulling robberies during traffic jams or at red lights, thereby providing a certain level of security. Pros and Cons: Pros – It protects child passengers inside the car by preventing them from opening the door handles while the vehicle is in motion. Cons – It may hinder escape in emergencies.
19
2
Share

Will the antifreeze overflow if too much is added?

If too much antifreeze is added, it will overflow. It is best to use a syringe to extract the antifreeze that exceeds the maximum water level. Antifreeze prevents the coolant from freezing when the car is parked in cold winter, which can crack the radiator and damage the engine cylinder block. Its full name is antifreeze coolant. Many people think that antifreeze is only used in winter, but in fact, antifreeze is used all year round. There are many types of automotive antifreeze, such as calcium chloride in inorganic substances, methanol, ethanol, ethylene glycol, glycerin, lubricating oil in organic substances, as well as common sugar and honey in daily life, which can all be used as the base liquid for antifreeze. After adding an appropriate amount of pure soft water, it becomes antifreeze in the general sense.
19
3
Share

Which gear should be used when pushing an automatic transmission car?

Automatic transmission cars should be pushed in the N (Neutral) gear. Below is an introduction to automatic transmissions: Operating principle: The engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume 10% more fuel than manual transmissions. Whether manual or automatic, more gears mean better fuel efficiency. Driving technique: For manual transmission cars, upshifting should be done at higher RPMs. Engines are designed to operate at higher RPMs, with parameters like dynamic balance and rotational inertia optimized for high-speed operation. Prolonged operation at abnormal RPMs increases internal component stress and wear, often leading to vibration and knocking, which affects engine lifespan. Using 3000 RPM as the upshift point ensures post-shift operation at around 2300 RPM, keeping the engine within its healthy operating range.
7
5
Share

What is a position lamp? What is its function?

Position lamps, also known as clearance lamps, serve the purpose of allowing other drivers to judge the size and width of the vehicle ahead during dusk driving. When the light switch is turned to the first position, the small lamps that illuminate at the front and rear are the position lamps (also referred to as dusk driving lamps, which are turned on when it is not completely dark; the next position after the position lamps is the low beam, while the high beam refers to the main headlights). High and low beams are commonly known as headlights, which, as the eyes of the car, are closely related to safe driving at night or under bad weather conditions. The angle of the high beam is too high, easily dazzling the eyes of oncoming vehicles and pedestrians around, and it is considered an impolite driving behavior.
9
3
Share

Which country does NSK bearings belong to?

NSK bearings are from Japan. Since 1916, when NSK became the first company in Japan to manufacture bearings, it has served as a pioneer in the Japanese bearing industry, developing and providing various types of bearings, making significant contributions to industrial development and technological advancement. Here is additional information: NSK: NSK has developed numerous new types of bearings to meet the needs of users worldwide and has made substantial contributions to industrial development and technological progress. Leveraging its technical expertise in precision machining, NSK continues to develop high-precision products such as energy-efficient and high-performance bearings for home appliance motors, dental medical bearings, automotive components, and precision machinery parts. The company also actively engages in diversified operations in fields like electronic applications.
6
5
Share

What are the basic structural components of the ABS system?

ABS system mainly consists of 4 components: Wheel speed sensor, electronic control unit ECU, hydraulic unit, ABS warning light. The wheel speed sensor detects the motion state of the wheels and sends sinusoidal electronic pulse AC signals, which are then processed by the modulator to convert the pulses into digital signals and transmit them to the electronic control unit. The electronic central control unit ECU receives input signals from the wheel speed sensors, calculates the wheel speed, vehicle speed, and slip ratio based on these parameters, determines the wheel state according to the slip ratio, and issues control commands to the hydraulic unit. The hydraulic unit adjusts the pressure in the brake lines according to the control commands, with the adjustment process including pressure holding, pressure increase, and pressure decrease. The ABS warning light is used to alert the driver to system malfunctions, displaying a fault indicator light on the dashboard.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.