···
Log in / Register

How Many Colors Does the Lynk & Co 03 Have?

1 Answers
StKyle
09/06/25 5:57am

The Lynk & Co 03 is available in five colors: white, red, black, blue, and gold. The Lynk & Co 03 is a compact car with body dimensions of 4639mm in length, 1840mm in width, and 1472mm in height, with a wheelbase of 2730mm. The front suspension of the Lynk & Co 03 uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. In terms of power, the Lynk & Co 03 is equipped with a 1.5T inline 3-cylinder turbocharged engine, delivering a maximum horsepower of 156PS, a maximum torque of 245Nm, and a maximum power of 115kW, paired with a 6-speed manual transmission.

Was this review help?
8
3
Share
More Forum Discussions

What is the tire size of the Avancier?

The Avancier is equipped with 19-inch tires both front and rear, all using 245/55R19 tires. The Avancier is a mid-size SUV produced by GAC Honda, with a body length of 4858 mm, width of 1942 mm, height of 1670 mm, and a wheelbase of 2820 mm. The front suspension type used in the Avancier is a MacPherson independent suspension, and the rear suspension type is a multi-link independent suspension. In terms of transmission: the 1.5-liter version of the Avancier is equipped with a CVT continuously variable transmission across all models; the 2.0-liter version of the Avancier is equipped with a 9-speed automatic manual transmission across all models. Drive system: the 1.5-liter version of the Avancier is front-wheel drive across all models; the 2.0-liter version of the Avancier offers both front-wheel drive and four-wheel drive options.
1
2
Share

What Causes Multiple Cylinder Misfires in Cars?

Reasons for multiple cylinder misfires in cars are as follows: 1. Electrical wiring issues. 1.1 Aging or leaking electrical wiring, causing intermittent ignition faults. 1.2 Faulty ignition coils or spark plugs, resulting in poor ignition or conduction. 1.3 Loose wiring, exposed wires grounding, etc. 2. Fuel system issues. 2.1 Insufficient fuel injection pressure due to faulty electronic fuel pump. 2.2 Blocked or contaminated fuel lines, leading to poor fuel supply. 2.3 Faulty or clogged fuel injectors. 3. Engine-related issues. 3.1 Wear and aging, delayed maintenance, or use of substandard or low-quality engine oil. 3.2 Excessive wear causing cylinder pressure to fall below normal values. 3.3 Aging belts or incorrect ignition timing.
18
0
Share

How long does it take to replace an engine timing belt?

The engine timing belt is generally replaced every 3 to 5 years or approximately 80,000 to 100,000 kilometers. The specific replacement interval depends on the actual usage of the vehicle. Details are as follows: 1. If the vehicle is often driven with light loads, the belt can be inspected around 80,000 kilometers. If no issues are found, it can continue to be used until replacement is needed at 100,000 to 130,000 kilometers. 2. If the vehicle is frequently driven under heavy loads, leading to greater belt wear, it should be inspected around 60,000 to 80,000 kilometers and replaced at 100,000 kilometers. Below is a brief introduction to the automotive timing belt: The timing belt is a rubber component with a limited service life. Over time, it naturally ages, hardens, and develops surface cracks. Additionally, since the timing belt operates continuously at high speeds, it is prone to wear and more likely to develop issues.
14
1
Share

Should You Press the Brake When Shifting from D to N in an Automatic Transmission?

Shifting from D to N in an automatic transmission requires pressing the brake. Doing so will not cause any damage to the transmission. If you do not press the brake, the vehicle will coast in neutral, which can not only damage the car but also pose life-threatening risks. Below are the relevant details: Impact on Braking Performance: In neutral, there is no engine braking force, so the braking system must work entirely on its own. This can easily lead to overheating of the brakes, causing thermal fade and reducing braking performance. Risk of Shortening Transmission Lifespan: Neutral gear cuts off the power connection between the engine and the transmission, leaving the transmission in an independent state without the engine's power output. This causes the transmission fluid pressure to drop rapidly. Insufficient fluid pressure can lead to poor lubrication between internal components, increasing the transmission's internal temperature and friction between parts. Over time, this accelerates the aging of the transmission, reducing its lifespan.
11
2
Share

How to Activate the Snow Mode in the Honda Avancier?

The method to activate the snow mode in the Honda Avancier: There is a 'snow' button on the left side of the gear shift button in the Avancier, which is the switch for the snow mode. Press this button to activate the snow mode. The snow mode forces the car to start in 2nd gear during initial acceleration, preventing wheel slippage caused by excessive torque. The front center armrest of this vehicle features multiple adjustment methods. Pulling it backward reveals cup holders, and both sides can be opened separately. Additionally, the storage space is highly flexible. The cup holders have two adjustable depths to accommodate bottles of different sizes, and the armrest compartment is conveniently partitioned for storing various items. This car measures 4816 mm in length, 1942 mm in width, and 1669 mm in height, with a wheelbase of 2820 mm, placing it in the midsize SUV category. While most SUVs of similar size are seven-seaters, the Avancier is a five-seater SUV.
9
5
Share

Can an Automatic Transmission Car Stall When Starting?

An automatic transmission car without faults generally will not stall when starting, unless it has been used for a relatively long time. Fault reasons include issues with the throttle valve, spark plugs, engine oil, etc. Methods to handle stalling in automatic transmission cars: Automatic transmission cars that have been used for a slightly longer period may experience unexplained stalling while driving. In such cases, the owner should take immediate and correct action or promptly visit a specialized automatic transmission repair shop for an inspection. Operating principle of automatic transmission cars: The driver only needs to control the accelerator pedal to regulate the speed. Automatic transmission cars can automatically adjust speed and torque based on road conditions, allowing the driver to focus entirely on road traffic without being distracted by gear shifting or stalling due to sudden braking. Inspection and handling: If the throttle valve is dirty, clean it and match the vehicle's computer; check the spark plugs and replace them if necessary; for engine oil issues, inspect and replace the oil; if the fuel injectors or fuel lines are dirty, clean the fuel lines and use standard fuel products.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.