How many colors are available for the Chevrolet Sail?

How to Adjust the Headlights of a Skoda Octavia?

To adjust the headlights of a Skoda Octavia, it is best to do so at night, with the headlights facing a wall. The light beam should be positioned slightly to the left. There are two adjustment screws for the headlights: one adjusts the height, and the other adjusts the left-right alignment. More information about the Skoda Octavia headlights is as follows: 1. Car headlights, also known as car front headlights or LED daytime running lights, are closely related to safe driving at night or in bad weather conditions. 2. The use and maintenance of car lights should not be overlooked. The headlight assembly also includes position lights, which are used during dusk or nighttime driving to make the vehicle's position visible and enhance safety during night driving. The headlights are installed in the middle of the headlight assembly. 3. A car headlight contains a bulb with filaments for both low and high beams, controlled by a switch to toggle between near and far light beams. Most modern vehicles are equipped with an automatic headlight controller in the headlight assembly, which can automatically adjust the light beam during oncoming traffic, improving driving safety.

4

2

Share

How to Reset the Maintenance Light on GAC Mitsubishi Outlander?

Steps to reset the maintenance light for the new GAC Mitsubishi Outlander: 1. Turn the ignition switch to "OFF" mode, repeatedly press the indicator selection button at the lower right of the dashboard until the information display switches to the maintenance cycle reminder. 2. Press and hold the indicator selection button for 6 seconds, and the maintenance light will be reset. Steps to reset the maintenance light for the old GAC Mitsubishi Outlander: 1. Turn the ignition switch to "OFF" mode, repeatedly press the "INFO" button until the information screen switches to the maintenance reminder. 2. Press and hold the "INFO" button for 3 seconds, when the maintenance light flashes, press the "INFO" button, and the display will change to "CLEAR".

7

4

Share

What is the recommended oil specification for Kia K3?

The Kia K3 engine can use both 5W20 and 5W30 oil specifications. For vehicles under 100,000 kilometers, it is recommended to use 5W20 oil viscosity as it has lower viscosity and less resistance. However, after exceeding 100,000 kilometers, 5W30 must be used as its higher viscosity helps form a better protective oil film on engine components. The Kia K3 requires engine oil with an API rating of SM grade or higher. Engine oil quality is typically indicated by API classifications. The "S" series represents gasoline engine oils, with specifications ranging from SA to SN. Each successive letter indicates improved performance and more protective additives for the engine. Methods for selecting engine oil: Choose oils from major brands or manufacturers: Examples include Shell, Mobil, Castrol, Caltex, Total, BP, Valvoline, Fuchs, GS, as well as domestic brands like Kunlun, Great Wall, and Longpan. Select by category: Engine oils are divided into gasoline (marked with "S" in API rating on packaging) and diesel (marked with "C") types. Regular passenger cars should use gasoline engine oil. API grade selection: For gasoline engines, lower-grade oils (mineral-based) suit commercial vehicles or older cars. SL grade oils are mostly mineral-based (some brands offer semi-synthetic), recommended for passenger cars over 5 years old. Seasonal selection: Common specifications include 5W-30, 5W-40, and 10W-40. Use 5W-30 in winter (0W in northern regions), 5W-40 for all-season use in most areas, and 10W-40 in summer.

7

0

Share

What are the power options for the Passat?

The Passat offers three engine options: a 1.4T and two 2.0T variants (low power and high power). The 1.4T version is labeled as 280TSI, delivering a maximum horsepower of 150 hp and a peak torque of 250 Nm, paired with a 7-speed dry dual-clutch transmission. The 2.0T low-power version is labeled as 330TSI, producing a maximum horsepower of 186 hp and a peak torque of 320 Nm, matched with a 7-speed wet dual-clutch transmission. The high-power version is labeled as 380TSI, offering a maximum horsepower of 220 hp and a peak torque of 350 Nm, also paired with a 7-speed wet dual-clutch transmission. In terms of exterior design, the new-generation Passat adopts Volkswagen's latest design philosophy. The front face features a flowing chrome trim, an evolved version of Volkswagen's signature grille, a dot-matrix horizontal grille, double-L-shaped full LED lens headlights, and a more robust engine hood, all contributing to a refreshed front appearance. For the interior, echoing the exterior, the large LCD display in the center console enhances the technological feel. The extensive use of soft materials and wood trim creates a comfortable and luxurious ambiance. The new-generation Passat also comes with a large 1000*870mm electric panoramic sunroof, allowing rear passengers to enjoy a panoramic view. Additionally, to prevent pinching incidents, the large electric panoramic sunroof is equipped with anti-pinch protection sensors, which automatically stop the closing process and slightly retract upon detecting obstacles. In terms of safety, the new-generation Passat features a newly developed body structure with an ultra-high-strength steel ratio of 84%. It is equipped with various systems including a HUD head-up display, RTA parking exit assist, Area-View panoramic imaging, PLA 3.0 intelligent parking assist, DLA dynamic light assist with road clarity, ACC adaptive cruise with stop-and-go function, Traffic Jam Assist, Lane Assist, Front Assist with pedestrian recognition & Pre-Crash preventive occupant protection, as well as BSD blind spot monitoring and intelligent fatigue detection.

7

0

Share

What is the reason for the discontinuation of the Haima M5?

The Haima M5 is not exactly discontinued; instead, it has been rebranded under the Haima Family series and officially renamed as the fourth-generation Family. The Haima M5 model had serious quality defects in its engine, requiring extensive repairs and replacements, which resulted in significant financial losses for Haima, leading to the discontinuation of this model. To adjust its strategy, the company transformed the Haima M5, making the new-generation Family M5 both the fourth-generation product of the Family brand and a new strategic model for Haima's 2.0 era. Below is an introduction to the new-generation Family M5: 1. Stylish and spacious full-size body. 2. Solid and stable handling performance. 3. Powerful and smooth powertrain combination. 4. 360-degree upgraded optimized configuration. It features a full-size body design with a length of 4698mm, providing a comfortable and premium space. The styling adopts the wind dynamic aesthetic design concept, effectively reducing the drag coefficient to 0.28, making driving more economical and environmentally friendly.

13

4

Share

How to Remove the Skoda Octavia Cigarette Lighter Socket?

There are six methods to remove the Skoda Octavia cigarette lighter socket: unscrewing the shell, removing screws, dismantling the panel, removing panel screws, detaching the panel box, and operating the inner and outer rings. Method 1: Unscrewing the Shell - Some car cigarette lighter sockets have a screwed-on shell at the back, which can be rotated counterclockwise to remove and clockwise to reinstall. Method 2: Removing Screws - Some car cigarette lighter sockets are fixed with screws at the back. Simply use a wrench to remove the screws to take it off, and reinstall by screwing them back in. Method 3: Dismantling the Panel - Remove the gear shift lever panel, which is held by plastic clips. You can pry one side up by hand or with a flathead screwdriver to remove the entire panel. Method 4: Removing Panel Screws - After removing the gear shift lever panel, the cigarette lighter panel door will open automatically, revealing two black screws. Use an M4 hex key to remove them. Method 5: Detaching the Panel Box - Pull the plastic panel box of the cigarette lighter out by hand. When it is about 10 cm out, disconnect the wiring before fully removing the entire box. Method 6: Operating the Inner and Outer Rings - The cigarette lighter consists of outer and inner rings. Press the inner ring in when using it, and it will automatically return to its original position when it reaches a certain temperature. Then, pull out the outer ring by hand.

13

4

Share

How many colors are available for the Chevrolet Sail?

How to Adjust the Headlights of a Skoda Octavia?

How to Reset the Maintenance Light on GAC Mitsubishi Outlander?

What is the recommended oil specification for Kia K3?

What are the power options for the Passat?

What is the reason for the discontinuation of the Haima M5?

How to Remove the Skoda Octavia Cigarette Lighter Socket?

What tires does the Roewe 360 use?

How to Reset the Maintenance Light on a Jetta?

Which Volkswagen model is the Motion?

Where is the cruise control on the Audi A3?