How Many Chances Are There for the Subject 2 Test?

1 Answers
McAiden
07/29/25 4:50pm
There are five chances for the Subject 2 test, meaning you can schedule the test five times, with two attempts each time. Subject 2, also known as the small road test, is a component of the motor vehicle driver's license examination. It is the abbreviation for the field driving skills test, which includes the following items: reversing into a garage, stopping and starting on a slope, turning at a right angle, driving along a curve, and parallel parking. The time limits for Subject 2 are as follows: 1. The completion time for reversing into a garage must not exceed 210 seconds; 2. The completion time for parallel parking must not exceed 90 seconds; 3. For stopping and starting on a slope, you must start and go up the slope within 30 seconds after stopping.
Was this review help?
9
0
Share
More Forum Discussions

What kind of glue should be used to repair a leaking gasoline tank?

Tank leaks can be repaired with stainless steel repair adhesive. After curing, stainless steel repair adhesive has high hardness and no shrinkage, and can undergo various mechanical processes. Introduction to automobile fuel tanks: Automobile fuel tank is the full name of car fuel tank. Currently, with the development of the automobile industry and the revitalization of the domestic automobile industry, the demand for automobile fuel tanks from major automobile manufacturers has shown a significant upward trend. Capacity of automobile fuel tanks: Generally, small cars have a fuel tank capacity of 35-45 liters, while medium-sized cars have a fuel tank capacity of about 55-75 liters. After filling up the fuel tank, it can usually run for about 500 kilometers. The size of the fuel tank depends on the car's displacement: cars with higher fuel consumption have larger tanks, while those with lower consumption have smaller tanks.
10
3
Share

What should be noted when replacing new tires?

When replacing new tires, pay attention to the following: 1. Distinguishing between new and old tires: There will be significant differences between new and old tires when placed together, with noticeable distinctions in tread depth and rubber color. The small particles on new tires and the tread hairs on the sidewalls indicate that the tire is brand new. 2. Tire orientation: The so-called tire orientation refers to which side should face outward. When installing the tire, ensure the side with numbers faces the front of the wheel hub. 3. Choosing the right tire: The specifications of the tire should match the other tire on the same axle. 4. Replace the valve stem as well: After replacing the tire, the aging cycles of the new tire and the valve stem differ, which may lead to issues with the valve stem. Therefore, replace the valve stem along with the tire. 5. It is recommended to perform a four-wheel alignment, specifically front wheel alignment, when installing new tires. This includes four items: caster angle, kingpin inclination angle, camber angle, and toe angle.
3
3
Share

How to Install Car Door Sill Plates?

Stainless steel welcome pedals are exquisitely crafted and rust-resistant, adding a three-dimensional and eye-catching appeal to your vehicle. Made from high-quality stainless steel through mold manufacturing, these pedals feature a smooth and glossy surface. They are easy to install and provide effective protection against collisions and scratches. Each sill plate is embossed with the vehicle's logo, ensuring a perfect match with your car. They not only protect your car's door sills from damage but also enhance its overall appearance.
15
2
Share

What are the reasons for Mercedes-Benz air suspension failure?

Mercedes-Benz air suspension failures are generally caused by leaks in the air suspension system or its connecting components; various sensor failures such as body height sensors and acceleration sensors; damaged pneumatic shock absorbers; air compressor malfunctions; or faults in the air suspension control unit/system power circuit. Working principle of air suspension: The air suspension system mainly consists of a control computer, air compressor, pressure storage tank, pneumatic front and rear shock absorbers, and an air distributor. Functions of air suspension: Body level control, body level adjustment, and ADS function work by using the air compressor to generate compressed air, which is then delivered to the air chambers of the springs and shock absorbers. Height sensors are installed near both front and rear wheels. Based on the output signals from these height sensors, the vehicle's computer determines changes in body height and controls the compressor and exhaust valves to compress or extend the springs, thereby achieving shock absorption effects and altering the vehicle's height.
12
1
Share

What are the precautions for spark plug installation?

Precautions for installing and replacing spark plugs: When removing the high-voltage distributor wires, mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. During removal, check for external debris such as leaves or dust and ensure thorough cleaning. Methods to determine if a spark plug is damaged: After removing the spark plug, observe its condition based on the following appearance colors. A normal spark plug's insulator skirt and electrodes should appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, an electrode gap between 0.8-0.9mm, and no signs of electrode burn. If the spark plug is contaminated with oil or deposits but not damaged, it can continue to be used after cleaning. If the spark plug is severely damaged—showing signs of blistering, black streaks, cracks, or melted electrodes—identify the cause of the damage, resolve the issue, and replace the spark plug. Additionally, if the spark plug appears black as if smoked, it indicates incorrect heat range selection, a rich air-fuel mixture, or oil leakage.
15
3
Share

What to do if the ETC is not responding?

The solutions for an unresponsive ETC are: 1. Do not drive too fast when passing through the ETC lane; 2. Check if the ETC device has become loose, fallen off, or been self-disassembled, causing the anti-tamper switch to pop out, and reset all data if necessary; 3. Charge the ETC device; 4. Verify if it is the correct ETC card for the vehicle. Additional information: The installation method for ETC is: 1. Inspect the ETC card and OBU for any damage, press the anti-tamper button on the OBU, a red light will briefly illuminate, and the OLED screen will display "Please insert card," indicating the device is functioning properly; 2. Clean the front windshield, ensuring the glass surface is dry, peel off the adhesive backing of the OBU, attach it to the installation position, and press firmly for 2 to 3 minutes; 3. Insert the ETC card with the front facing the driver and the back facing the windshield, inserting the chip into the device.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.