···
Log in / Register

How many chances are there for the reverse parking in Subject 2?

4 Answers
SanColeman
07/28/25 11:37am

There are two chances for the reverse parking test in Subject 2. If you fail the official test, you will have one more chance for a retake. Below is a detailed introduction to the main content of the reverse parking in Subject 2: 1. Right reverse parking: (1) After getting into the car, the driver needs to adjust the seat and rearview mirrors, fasten the seat belt, shift the car into reverse gear, release the parking brake lever, and start reversing at idle speed after the car starts. While driving, the driver can observe the garage through the right rear window. (2) When the black edge of the right rear window aligns with the right edge of the garage line, the steering wheel should be turned steadily to the right to the limit position. (3) After the car enters the garage, the driver should pay attention to the left rearview mirror. When the entire left edge of the garage is observed, the steering wheel should be immediately straightened. (4) When the left door handle is observed to be level with the bottom line of the garage in the left rearview mirror, stop immediately. 2. Left reverse parking: (1) Shift the car into reverse gear, keep the steering wheel turned to the left limit position, and reverse backward. (2) The driver should pay attention to the left rearview mirror and adjust the direction to reverse the rear of the car into the garage. (3) After the car enters the garage, the driver should pay attention to the right rearview mirror. When the entire right edge of the garage is observed, the steering wheel should be immediately straightened. (4) When the right door handle is observed to be level with the bottom line of the garage in the right rearview mirror, stop immediately.

Was this review help?
17
0
Share
GageLee
08/11/25 4:35pm

During the Subject 2 driving test, I was particularly nervous about the reverse parking section as a novice. The exam rules allow two attempts for each task. If you fail the first time (e.g., crossing lines or improper stopping), the examiner will remind you of your second chance, and you must retry immediately. Failing both attempts means failing the entire Subject 2 test, requiring rescheduling—which could take days or weeks—plus additional practice to avoid mistakes. I remember messing up my first try due to excessive speed, but passing on the second attempt by slowing down and carefully monitoring the rearview mirrors. So, practice simulations frequently, identify reference points like parking bay corners and marker lines, control the clutch smoothly without sudden braking, and maintain a calm mindset. Don’t take extra chances for granted—failing delays progress and incurs extra retake fees.

Was this review help?
15
2
Share
Expand All
Lynda
09/28/25 5:42am

As a coach who frequently mentors beginners, I emphasize that during the Subject 2 reverse parking test, each candidate only has two attempts. If the first attempt is unsuccessful, they immediately get a second try. If both attempts fail, the test ends, and they must re-register for the entire subject. This rule is in place to ensure solid skills and avoid last-minute cramming. During regular practice, it's essential to repeatedly drill parking techniques, such as adjusting the angle by checking the rearview mirror, reversing slowly to avoid crossing lines, and smoothly controlling the clutch to prevent stalling. It's advisable to simulate the test scenario a few times before the actual exam to adapt to real conditions. During the test, stay calm and don't let the first mistake affect your emotions. The opportunities are limited, but with proper handling, you can pass in one go, saving time and avoiding extra costs.

Was this review help?
6
2
Share
Expand All
EvanFitz
11/11/25 7:37am

Exam rules are clear: For the reversing into garage segment in Subject 2, you have two attempts. Failing the first attempt leads directly to the second try, and failing both requires rescheduling the entire Subject exam. This necessitates advance preparation—practice aligning reference points like rearview mirrors and controlling speed during training to avoid exceeding time limits or crossing lines. Failing and retaking consumes both time and money, so focused practice is essential to minimize trial and error.

Was this review help?
14
5
Share
Expand All
More Forum Discussions

How to turn on the air conditioning cooling for the Chevrolet Malibu?

Press to cycle between "Off", "Eco" and "Max" air conditioning modes. First press the AC button, then press the snowflake button, and then adjust the temperature. Malibu dual-zone automatic temperature control system. Driver and passenger temperature controls.
1
2
Share

How to Clean a New Car Without Floor Mats Getting Dirty?

When eating ketchup or other sauce-based foods in the car, if the car floor mats get accidentally stained, or if lipstick or other dyes leave marks on the car floor mats and seats. After cleaning, try using a little vinegar water to scrub, then wipe clean with a damp cloth, and everything can be restored to its original condition.
14
5
Share

What is the fuel tank capacity of the Binyue?

2021 Geely Binyue has a total of 6 models, all of which feature a fuel tank capacity of 45 liters. The entire lineup is equipped with either a 1.4L or 1.5L turbocharged engine, paired with one of three transmission options: a 6-speed manual transmission (MT), a 6-speed wet dual-clutch transmission (DCT), or a 7-speed wet dual-clutch transmission (DCT). All models adopt a front-engine, front-wheel-drive layout. In comparison to its peers, the Song has a fuel tank capacity of 63 liters, the Haval M6 offers 55 liters, and the Changan CS75 provides 58 liters. To check the remaining fuel level, owners can observe the fuel gauge on the right side of the instrument panel, marked with 'E' and 'F'. When the needle approaches 'E', it indicates low fuel, while nearing 'F' signifies sufficient fuel. Fuel tank maintenance includes: Draining accumulated water and sediment from the tank, and inspecting fuel line connections and valves for leaks. For tanks equipped with air and vapor valves, ensure the vent holes are unobstructed. The filler inlet filter should remain intact to prevent contaminants from entering the tank during refueling and clogging the fuel lines. The sealing gasket on the fuel filler cap must also be in good condition to avoid fuel spillage while driving.
6
4
Share

How to Remove Car Wiper Blades?

Lift the wiper blade cover. The blue arrow indicates the direction of force required to lift the wiper blade perpendicular to the windshield. Lift and remove the wiper blade. You can slightly adjust the angle of the wiper blade when applying force. The installation steps are the reverse of the removal steps. Replacing the rubber strip of a conventional wiper blade is straightforward. Simply pull out the old rubber strip with force. After removing the old rubber strip, remember to take out the metal strip inside. Insert the new rubber strip into the wiper blade. Start from the end without the clip and push it toward the clip. Use your right thumb and index fingernail to press the clip while using your left hand to push the rubber strip into place.
18
3
Share

How to Fix the Yellow Warning Light on the Dashboard?

When the yellow warning light on the dashboard illuminates during vehicle use, it indicates that the vehicle's engine requires maintenance or servicing. The issue can be diagnosed by connecting a computer to the OBD port to read the fault codes, which is especially useful if you are interested in the vehicle's mechanical or electronic systems.
3
2
Share

How to Quickly Repair a Flat Tire?

Simply insert a rubber strip using a nail to plug the puncture, and the tire can be used normally for a short period. However, this method is only suitable for emergency use. Cold patching involves thinning the puncture hole on the inner side of the tire, then applying a specialized rubber strip and repeatedly pressing it to restore the tire to normal use. Insert the strip into the puncture hole on the inner side of the tire and sand it down to perfectly fit with the tire. This is currently a very mainstream tire repair method. The initial steps of hot patching are quite similar to cold patching. The only difference is that in the final step, hot patching uses a heating device to melt the rubber strip, filling the puncture hole in the tire.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.