How Many Chances Are There for Subject Three Test?

1 Answers
Joanna
07/23/25 8:39pm
There are five chances for the Subject Three test. According to relevant regulations, within the validity period of the driving skill test permit, the number of scheduled tests for both Subject Two and Subject Three road driving skills tests must not exceed five. If the fifth scheduled driving test is still not passed, the results of other subjects that have been passed will be invalidated. Subject Three is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safe and civilized driving knowledge test subjects. The road driving skills test includes: vehicle preparation, light simulation test, starting, driving in a straight line, shifting gears, changing lanes, parking by the roadside, going straight through intersections, turning at intersections, meeting vehicles, overtaking, making U-turns, and driving at night. The test content varies for different types of vehicles eligible for driving.
Was this review help?
17
0
Share
More Forum Discussions

Where are the clutch and accelerator located?

Location of the clutch and accelerator: The clutch pedal in a car is generally on the far left, the accelerator pedal is on the far right, and the brake pedal is between the clutch pedal and the accelerator pedal. The clutch is part of the car's transmission system and is installed between the engine and the gearbox. Usage of the clutch and accelerator during driving: 1. During driving, the driver operates the clutch pedal, with the electromagnetic clutch engaging or disengaging based on the coil's power supply. 2. The accelerator controls the car's speed. Generally, the deeper the accelerator is pressed, the faster the car goes, and the lighter the press, the slower the speed. The coordination between the clutch and accelerator ensures the car's drivability and controllability.
10
1
Share

How often should new car tires be inflated?

Car tires generally need to be inflated every 1 to 2 months. About tires: 1. When the tire is already in a state of severe underinflation, the tire wall cannot get the proper support, which not only increases fuel consumption but also increases the tilt when turning, and there is a higher risk of overheating and tire blowout during high-speed driving. 2. During the use of tires, tire pressure is a very important indicator. It is necessary to ensure that the tire pressure matches the manufacturer's required pressure, otherwise, whether the tire pressure is too high or too low, it will cause great damage to the tire's lifespan.
6
0
Share

What Are the Causes of High Engine Coolant Temperature?

Reasons for high engine coolant temperature: 1. Insufficient coolant: Prolonged water circulation during engine operation can gradually deplete the coolant in the engine's cooling system, leading to a shortage of water in the radiator, which can easily cause the engine temperature to rise. 2. Radiator leakage: Broken or improperly connected radiator hoses can cause leaks, obstructing water circulation and, in severe cases, leading to engine "boiling over." 3. Cooling fan malfunction: A damaged cooling fan or a short circuit in the wiring can cause the fan to stop working or slow down, preventing the engine's heat from dissipating, which naturally raises the coolant temperature. 4. Thermostat failure: The thermostat controls the flow path of the coolant. If it becomes stuck or fails, it can affect the engine's cooling cycle, preventing the engine's heat from being effectively dissipated.
17
0
Share

What should be noted when changing lanes on the road?

Precautions for changing lanes: 1. Observe the side situation of the vehicle: When intending to change lanes, in addition to observing the rear of the vehicle, it is also necessary to observe the side situation of the vehicle to confirm whether there are parallel vehicles on the side of your vehicle. If there are parallel vehicles in the lane you intend to change to, you must not force a lane change. 2. Strengthen the observation of the rear situation: When preparing to change lanes, the driver must observe the situation behind the vehicle through the rearview mirror to confirm whether there are any vehicles and if it is safe. 3. Signal the lane change: After observation, if it is confirmed that there are no vehicles behind, to the side rear, and in the lane you intend to change to, and it is safe to change lanes, the driver should then signal the intention to change lanes. 4. Change lanes: The driver signals the intention to change lanes, waits for the driver of the vehicle in front to give a signal to yield, and makes a yielding gesture. After confirming safety, the driver should accelerate to pass, then continue to accelerate for a distance before returning to the original lane.
6
3
Share

Will I be fined if one headlight is not working?

A headlight not working will result in a fine. For safe driving considerations, according to Article 90 of the Road Traffic Law, the penalty for incomplete vehicle lighting is a fine of 100 yuan and one demerit point. Methods for using vehicle lights: 1. In foggy weather, you must turn on the running lights and front and rear fog lights, and you can also turn on the low beams. 2. Running lights, also called width-indicator lights, are used to make the four corners of the vehicle visible to others. They should be turned on during rainy weather, in dim light, or in underground parking lots. 3. Turn signals are used to indicate that the vehicle needs to turn. In situations where the vehicle needs to turn, the turn signal must be activated in advance. Only after confirming there are no vehicles approaching from behind can you turn. Avoid turning immediately after signaling without checking the situation behind you.
19
5
Share

Will driving straight over a solid white line result in demerit points?

Driving straight over a solid white line is strictly considered a violation of traffic rules, resulting in a fine of 100 yuan and a deduction of three points; crossing a dashed white line does not incur any penalty. The purpose of solid white lines is to separate lanes moving in the same direction, while single or double solid yellow lines prohibit vehicles from crossing or driving over them in both directions. Below is an introduction to lane demarcation lines: 1. Dashed white lines separate lanes moving in the same direction, allowing lane changes or overtaking when safe. 2. Solid white lines also separate lanes moving in the same direction but do not permit lane changes. 3. Solid yellow lines separate lanes moving in opposite directions and sometimes lanes moving in the same direction; they can serve as boundary lines or center lines, but lane changes are not allowed. 4. Dashed yellow lines can function as boundary lines or center lines.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.