How Many Chances Are There for a Makeup Test in Driving Test Subject 2?

1 Answers
VanCody
07/30/25 3:47am
For Subject 2 of the driving test, if the initial test is failed, one makeup test is allowed. If the applicant does not take the makeup test or fails the makeup test, the current test session is terminated, and the applicant must reschedule the test after ten days. Within the validity period of the driving skills test permit, the number of rescheduled tests for Subject 2 and Subject 3 (road driving skills test) must not exceed five times. If the fifth rescheduled test is still failed, the passing scores of other subjects already taken will be invalidated. The full score for Subject 2 is 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is considered passed if the following conditions are met: ① For applicants of large buses, tractors, city buses, medium buses, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. For large vehicles (A1, A2, A3, B1, B2), the test items include: pole test, hill start, parallel parking, single-plank bridge, curve driving, right-angle turn, narrow gate, continuous obstacles, bumpy road, narrow road U-turn, and simulations of highway driving, continuous sharp turns on mountain roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling. For small vehicles (C1, C2), the test items include: reverse parking, parallel parking, hill start (canceled for C2), right-angle turn, curve driving (commonly known as S-turn) as the five mandatory items (some regions include a sixth item: highway toll card collection).
Was this review help?
5
3
Share
More Forum Discussions

Can a 17-digit VIN be registered with a white license plate?

Electric vehicles with a 17-digit VIN cannot be registered with a white license plate. Such electric vehicles are classified as motor vehicles and can only be registered with motor vehicle license plates, not electric vehicle license plates. Registration method for 17-digit VIN vehicles: These vehicles are classified as electric motorcycles, and the registration process is the same as that for ordinary motorcycles. Registration must be completed at the vehicle management office or the vehicle management branches of various traffic police departments. However, a driver's license is required: a lightweight motorcycle requires an F-class license and is registered with a blue plate, while an electric motorcycle requires an E-class license and is registered with a yellow plate. Notes for registering a 17-digit VIN vehicle: Registering a 17-digit VIN vehicle requires purchasing compulsory traffic insurance (vehicle and vessel tax) and undergoing annual inspections. These vehicles are classified as motor vehicles, and the license plate issued is a motor vehicle plate, requiring the use of motor vehicle lanes. Motor vehicle registration requires corresponding production qualifications and a motor vehicle compliance certificate.
1
1
Share

What items are generally included in car maintenance?

Common maintenance items include: engine oil, oil filter, fuel filter, air filter, and cabin air filter. Maintenance items and intervals: Automobile manufacturers provide a "Regular Maintenance Schedule" with each vehicle upon delivery. The maintenance items and intervals are typically determined based on mileage, aiming to achieve optimal performance and extend the vehicle's service life through regular maintenance. Different manufacturers and vehicle models may have varying maintenance items and intervals. Therefore, it's essential to refer to the vehicle's maintenance schedule for proper care. Car maintenance precautions: Avoid directly wiping the paint surface with a dry cloth. Rinse off dirt and soil from the car's surface with clean water, then dry with a clean absorbent cloth. Try to avoid air-drying after washing. When parking, consider avoiding prolonged exposure to sunlight, especially for white and non-metallic paint finishes. Minimize car washing frequency and avoid unnecessary waxing and polishing.
16
5
Share

What is the function of the choke valve?

The function of the choke valve is to appropriately close part of the air intake during cold engine starts, increasing the gasoline concentration in the mixture entering the cylinders to improve engine starting performance. After the engine is running normally, the choke valve should be fully opened; otherwise, an overly rich mixture can cause the engine to operate abnormally and lead to excessive fuel consumption. Definition of the choke valve: The choke valve is a component of a gasoline engine's carburetor, typically located at the carburetor's air intake, and is operated via a control knob installed on the dashboard. Usage of the choke valve: When starting the engine, the driver pulls out the choke knob on the dashboard, which closes the choke valve via a cable, causing the carburetor to supply a very rich mixture to facilitate engine starting. After starting, the driver should push the choke knob back to a nearly fully open position. At the same time, the throttle should be slightly opened to increase engine speed, shortening the warm-up time. Once the engine is warmed up, the choke knob should be fully pushed back.
13
3
Share

Can a new car be driven on the road without license plates?

A new car without license plates can be driven on the road if it has temporary license plates, but it is prohibited to drive without temporary license plates. Below is more information about temporary license plates: Types of temporary license plates: There are two types of temporary license plates. One has a sky-blue background with black characters and black borders, which is only valid for driving within the city, known as local temporary license plates. The other has a brown-yellow background with black characters and black borders, which can be used for driving across cities, known as non-local temporary license plates. Rules for using temporary license plates: Before the official license plates are issued, only temporary license plates should be used. Once the official license plates have been issued, even if the temporary license plates are still within their validity period, they cannot be used anymore. If caught by traffic police, corresponding penalties will be imposed.
6
3
Share

Why does the engine malfunction indicator light sometimes turn on and off?

It may be due to poor gasoline atomization and combustion efficiency when starting the engine cold, as the engine temperature is low. Engine malfunction indicator light intermittently turning on and off: This phenomenon occurs more frequently in winter, but generally requires no special attention. Within the first 5-10 minutes of starting, the engine malfunction light may flicker on and off, and the symptom will disappear once the coolant temperature normalizes. Vehicle self-diagnosis system: When a vehicle malfunction occurs, the malfunction indicator light on the dashboard will illuminate to alert the owner of potential issues. Pressing a button will display the fault code on the dashboard. Simultaneously, this fault signal will be stored in memory. Even after turning off the ignition switch, resolving the fault, or the indicator light turning off, the fault signal remains stored in memory to assist technicians in diagnosing the vehicle's problem.
12
4
Share

What are the penalties for turning over a solid yellow line?

Turning over a solid yellow line will result in a fine of 200 yuan and 3 demerit points. Below is detailed information on safe turning: 1. Use turn signals: Always use turn signals when turning; otherwise, other drivers may misjudge your actions, leading to unnecessary casualties. 2. Turn the steering wheel slowly: When turning, reduce your speed and avoid turning the steering wheel too sharply to prevent excessive centrifugal force that could cause the car to skid. If the car skids, immediately release the accelerator pedal. Turn the steering wheel toward the side of the skidding rear wheel, and once the car resumes straight movement, straighten the steering wheel to continue driving. 3. Avoid neutral gear when turning: Try not to enter a turn in neutral gear, especially for U-turns. In neutral, the engine cannot control the wheels' rotation, meaning the car is moving by inertia. All braking and steering operations become significantly less effective under these conditions, creating safety hazards.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.