How many centimeters higher is the chassis of an SUV compared to a sedan?

2 Answers
MacTyler
07/24/25 3:44am
SUV chassis are approximately 30-40cm higher than sedans. Below are the specific differences between SUVs and sedans: 1. Visibility: Due to their higher chassis and open design, SUVs offer a better field of vision, while sedans, with their relatively lower chassis, have a narrower field of vision compared to SUVs. 2. Comfort: Sedans generally have longer seats and a more ergonomic design, allowing for a more relaxed seating position with back support, making them more comfortable than SUVs. 3. Fuel consumption: With the same engine displacement, SUVs tend to consume more fuel. SUVs are designed to be heavier and taller than sedans, resulting in poorer aerodynamics, which affects their fuel efficiency compared to sedans.
Was this review help?
10
0
Share
MacElaina
08/10/25 11:19pm
I remember when driving an SUV, the ground clearance was significantly higher than that of a sedan, roughly 15 to 25 centimeters. This is because SUVs are designed with off-road needs in mind, such as driving on rough and uneven dirt roads—higher ground clearance prevents scraping against rocks or potholes. Having used several SUV models, I feel this height difference provides a broader field of vision, allowing for a clearer view of the road ahead and reducing accident risks. Additionally, the higher ground clearance is particularly useful in rainy or snowy conditions when navigating waterlogged sections, preventing engine water ingress. However, the increased height also comes with some drawbacks, such as reduced stability during turns and a tendency to roll. Overall, this advantage of SUVs suits those who frequently drive to suburban areas. When considering a vehicle change, it’s important to choose based on daily road conditions rather than just following trends.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

What Causes Inaccurate Fuel Gauge Readings?

Reasons for inaccurate fuel gauge readings: 1. Fuel gauge issue: If you've confirmed the tank is full but the needle doesn't reach the top, there may be a malfunction in the fuel gauge display or fuel level indicator. 2. Design issue: Some vehicle models don't use linear fuel gauge designs, resulting in slower readings in the first half and faster readings in the second half due to different design approaches. 3. Fuel level sensor problem: A faulty fuel level sensor prevents the system from accurately detecting fuel height, affecting gauge accuracy. 4. Parking position: The parking angle can change the float ball height in the fuel tank, affecting level judgment. Always check fuel levels when the vehicle is on flat ground and driving straight.
1
4
Share

How to Adjust the Seats in Volkswagen Tiguan?

Methods to adjust the seats in Volkswagen Tiguan: 1. Pull the lumbar support button forward or backward to adjust the angle of lumbar support; 2. Move the seat position switch forward or backward to adjust the seat position, lift up or press down to raise or lower the seat; 3. Move the backrest switch forward or backward to adjust the backrest angle; 4. To adjust the headrest, firmly grasp both sides of the headrest with both hands, push forward or pull upward until it locks into the desired position. The Volkswagen Tiguan is a compact SUV produced by SAIC Volkswagen, with a body length, width, and height of 4506mm, 1809mm, and 1685mm respectively, and a wheelbase of 2684mm.
18
5
Share

How to Deal with Adhesive on Car Glass?

Methods for dealing with adhesive on car glass: 1. Vinegar Method: First, scrape off the adhesive on the glass with a small knife, then mix half vinegar and half water, put it in a spray bottle, spray it on the glass, and polish it with old newspaper; 2. Use an Eraser: First, repeatedly wipe the adhesive marks with an eraser, prepare one dry and one wet cloth, first wipe the glass surface with the wet cloth, then dip the dry cloth in a small amount of white wine and wipe the glass vigorously; 3. Turpentine Method: First, gently scrape off the plastic film with a small knife, then repeatedly wipe it with a steel wool ball dipped in turpentine, and finally wipe it clean with a dry cloth. Car glass is an indispensable part of the car body accessories, mainly serving a protective function. Car glass mainly includes laminated glass, tempered glass, and regional tempered glass, which can withstand strong impact forces.
16
5
Share

What are the steps to remove the front bumper of a Langdong?

Steps to remove the front bumper of a Langdong: 1. Remove the left and right inner liner clips and pry open the inner liner; 2. There is a screw on the inner side of each bumper corner. Apply slight force to pry it open, then open the hood; 3. Remove the clips on the top of the bumper, followed by the clips and screws at the bottom, to detach the front bumper. The car bumper is a safety device designed to absorb and mitigate external impacts, protecting the front and rear of the vehicle body. The Langdong is a compact sedan produced by Beijing Hyundai, with body dimensions of 4570mm in length, 1775mm in width, and 1445mm in height, and a wheelbase of 2700mm. The front suspension of this vehicle is a MacPherson strut independent suspension, while the rear suspension is a torsion beam non-independent suspension.
8
1
Share

What are the starting steps for a Mercedes-Benz?

Mercedes-Benz starting steps: First, close the door, insert the key, press the brake, and turn the key to start. For Mercedes-Benz vehicles with a keyless start system, simply carry the key into the car, ensure the gear is in P, press the brake pedal, and press the start button to ignite the engine. Do not release the brake pedal at this time; shift into P to drive. Mercedes-Benz is a German automotive brand, and the company also offers models such as the A-Class, B-Class, C-Class, E-Class, S-Class, CLA, CLS, GLA, and GLK. Taking the Mercedes-Benz E-Class as an example, its body dimensions are 5078mm in length, 1860mm in width, and 1484mm in height, with a wheelbase of 3079mm. Both the front and rear suspensions of this vehicle use multi-link independent suspension.
9
4
Share

What is the card placed in the car?

The card placed in the car refers to the slot for installing an SD memory card. SD memory cards are independent storage media used in devices such as mobile phones, cars, digital cameras, portable computers, and MP3 players. They offer the advantages of being compact, portable, and easy to use. Most memory cards have good compatibility, making it convenient to exchange data between different digital products. Steps to download files to a memory card: 1. First, select the desired file on the webpage; 2. Then, download the file to your computer; 3. Insert the memory card into a card reader and then connect it to the computer; 4. Move the downloaded file to the memory card.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.