How many brands has BYD acquired?

What is the function of the car AC?

The AC button is the air conditioning cooling switch. The functions of the AC button are as follows: 1. Pressing the AC button activates the air conditioning cooling compressor, which blows out cold air. During hot summer weather, it is necessary to turn on the A/C button, at which point the car's compressor will start working and blow cold air. Car air conditioning heating has nothing to do with the compressor; the heat source for heating is not obtained from the air conditioning itself (meaning there will be warm air even without pressing the A/C button) but is provided by the car's radiator, relying on the heat generated by the engine. The heat is then blown into the car by the blower, with almost no energy consumption, so there is no need to turn on the A/C button. 2. When using the air conditioning for heating in winter, the A/C light being on does not help with heating at all. Instead, it causes unnecessary power loss due to the operation of the compressor. Therefore, when using the air conditioning for heating in northern winters, the A/C can be completely turned off without any impact on the heating function.

15

5

Share

Can I Drive Immediately After Getting My Driver's License?

You can drive immediately after getting your driver's license. Familiarize Yourself with the Vehicle: Before officially hitting the road, it's essential to familiarize yourself with the basic operations of commonly used functions, such as using the windshield wipers, turning on the lights, and defogging the air conditioning. If a beginner is not familiar with these functions while driving, they may easily panic in critical moments. Have an Experienced Driver Accompany You: During the initial stages of driving on the road, beginners can choose to have an experienced driver accompany them. This provides a sense of security, as the experienced driver can offer correct advice in case of emergencies. Choose Traffic Conditions: Try to select areas with less traffic, which provides an excellent practice environment for new drivers. Once you become proficient, you can then venture into areas with heavier traffic.

16

2

Share

What are the symptoms of a broken transmission mount pad?

Engine mount pad failure symptoms include idle steering wheel vibration, body vibration, and loud body resonance noise. The engine mount pad is an elastic structure that connects the engine to the frame, significantly reducing the transmission of engine vibration to the vehicle body, which can cause passenger discomfort. Function of engine mount pads: Engine mount pads serve as the connection between the powertrain and the vehicle body. Their main purposes are to support the powertrain, reduce the impact of powertrain vibration on the vehicle, limit powertrain vibration amplitude, and play a crucial role in the vehicle's NVH performance. The mount pads are used to install the engine on the frame, isolating engine resonance and primarily serving as vibration dampers. Lifespan of mount pads: Under normal use, engine mount pads can last over 6 years with no specific replacement interval. However, they must be replaced immediately if inspection reveals signs of cracking, aging, or corrosion. Generally, mount pads are replaced after exceeding 150,000 kilometers, with some vehicles not requiring replacement until over 200,000 kilometers or even longer.

4

3

Share

How Many Years Should Tires Be Replaced?

Tires generally need to be replaced after 4-5 years or 60,000-80,000 kilometers. How to determine if tires need replacement: When many fine cracks appear on the tire surface, which typically occur after about three years of use, regular inspections should be conducted to monitor any changes in the cracks. If the cracks become too long, too deep, or appear on the sidewall, the tires should be replaced. Incorrect tire usage: Both overinflation and underinflation can damage tires and affect the vehicle's driving performance. Frequent acceleration and sudden braking during driving will accelerate tire wear, so it is advisable to slow down and drive cautiously on roads with complex conditions.

15

1

Share

What Causes an Air Pump to Fail to Build Pressure?

An air pump's failure to build pressure can be caused by motor phase loss, damaged pump seals, or excessively low pressure limits. The specific reasons are as follows: Motor Phase Loss: Motor phase loss prevents the motor from delivering its rated power, thereby limiting the air pump's maximum output pressure (as pump pressure increases, motor load gradually rises, and power consumption increases accordingly). In this case, the electrical circuit should be inspected. Damaged Air Pump Seals: Particularly, piston head seal damage can cause air leakage between high- and low-pressure chambers. Most common air pumps are piston-type, resembling hydraulic cylinder structures. The piston head is equipped with seals, which over time can fail due to normal wear or aging, allowing air to bypass between high- and low-pressure chambers and preventing pressure buildup. This requires disassembling the air compressor and replacing the seals. This is the most common cause of air pump pressure failure. Excessively Low Pressure Limit Setting: For safety, pressure relief valves are installed at the output to prevent dangerous overpressure situations. If the valve's pressure setting is too low, the pump will automatically shut off each time pressure reaches the limit, manifesting as an inability to build pressure. However, the pump continues to operate normally otherwise.

1

0

Share

How long after passing Subject 3 will Subject 4 expire if not taken?

After passing Subject 3, the validity period is 3 years. If Subject 4 is not taken within 3 years, it will expire. Definition of Subject 4: After the implementation of the "Ministry of Public Security of the People's Republic of China Order No. 139", Subject 3 examination was divided into two parts. In addition to the road test, a safety and civilization knowledge test was added, commonly known as "Subject 4". Since this test is conducted after Subject 3, it is commonly referred to as the Subject 4 examination. Content of Subject 4 examination: Subject 4 mainly includes requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and knowledge of handling traffic accidents.

17

1

Share

How many brands has BYD acquired?

What is the function of the car AC?

Can I Drive Immediately After Getting My Driver's License?

What are the symptoms of a broken transmission mount pad?

How Many Years Should Tires Be Replaced?

What Causes an Air Pump to Fail to Build Pressure?

How long after passing Subject 3 will Subject 4 expire if not taken?

What is a Vehicle Certificate of Conformity?

What are the disadvantages of turning the steering wheel to full lock?

Does Tire Pressure Automatically Decrease in Winter?

What are the symptoms of a damaged shock absorber top mount?