How many brake lights does the Axela have?

1 Answers
HaileyLynn
07/29/25 10:29pm
The Axela has 3 brake lights. Brake lights are generally installed at the rear of the vehicle, with the main body color being red to enhance the penetration of the light source. This allows vehicles behind to easily detect when the front vehicle is braking, even in low visibility conditions, helping to prevent rear-end collisions. In terms of body dimensions, the sedan version of the Axela measures 4582mm in length, 1795mm in width, and 1458mm in height, with a wheelbase of 2700mm. For powertrain, the Axela is equipped with two Skyactiv technology engines: a 1.5L and a 2.0L naturally aspirated engine.
Was this review help?
16
2
Share
More Forum Discussions

Does the AC also turn on when the car's automatic air conditioning is set to warm air?

When using the car's automatic air conditioning for warm air, the AC does not need to be turned on. This is because the car's heating system utilizes the heat generated by the engine to produce warm air, achieving the heating effect. The AC is the cooling switch for the car's air conditioning. Precautions to take when using the car's heater: 1. Avoid directing the warm air straight at the head, as prolonged exposure can cause driver fatigue and affect driving safety; 2. Never leave the heater on continuously while sleeping in the car, as this can easily lead to carbon monoxide poisoning; 3. When the heater is on, the car becomes an enclosed space, creating an ideal environment for bacteria to grow and spread. If someone smokes in the car, the amine and nicotine in the smoke can adhere to the surface of the evaporator. Under conditions where the air conditioning is not frequently used or during rainy weather, bacteria can proliferate extensively on the evaporator surface, leading to air pollution inside the car when the air conditioning is turned on again.
5
5
Share

What is the tire model of the Roewe 350?

The tire model of the Roewe 350 is 205/55R16, featuring a five-spoke wheel design. The tires are typically made of wear-resistant rubber material, and can be categorized into solid tires and pneumatic tires. Pneumatic tires consist of an inner tube and an outer tire. Generally, it is recommended to check the tire pressure at least once a month and adjust it with each seasonal change. The Roewe 350 has a body size of 4521mm in length, 1788mm in width, and 1492mm in height, with a wheelbase of 2650mm. The interior of the Roewe 350 follows the family-style T-shaped layout, eschewing excessive embellishments in favor of a simple yet sporty design. The upper part of the center console features a matte black finish with chrome trim, giving it a premium look. The central LCD screen integrates functions such as navigation, six-disc CD audio control, and a rearview camera.
12
5
Share

How to Remove the Taillight of a Geely Emgrand?

The method to remove the taillight of a Geely Emgrand: 1. The taillights are mainly located on both sides of the rear of the vehicle, with the fastening screws inside the car; 2. Open the tailgate to see two plastic fastening clips inside, and use a tool to remove them; 3. Lift the interior trim panel to see the fastening screws inside, then remove them directly; 4. When taking out the taillight, be careful not to break the wiring harness, and place the old taillight properly. The Geely Emgrand is a compact car with body dimensions of 4632mm in length, 1789mm in width, and 1470mm in height, and a wheelbase of 2650mm. The front suspension of the Geely Emgrand is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. It is equipped with a 1.5L naturally aspirated engine, paired with a 5-speed manual transmission.
15
2
Share

How Long Can a Car Key Be Used After the Low Battery Warning?

After the low battery warning, a car key can typically be used for about 3 more hours. The method to replace the car key battery is as follows: 1. Press the circular button on the side of the key to remove the mechanical key; 2. Insert a tool into the gap at the top of the key and pry open the back cover; 3. Push the battery to one side to remove and replace it. The car key utilizes the wireless remote control function of the central locking system, allowing doors to be unlocked and locked from a distance without inserting the key into the lock. If the key runs out of battery, the starting method is: 1. Press the button on the side of the remote key to remove the mechanical key; 2. Insert the key into the door handle of the driver's side and open the door; 3. Place the car key near the lower right corner of the steering wheel and press the start button.
3
1
Share

What Oil Does a DSG Transmission Use?

DSG transmissions use ATF (Automatic Transmission Fluid), not gear oil. The transmission fluid in a DSG should be changed every 40,000 to 60,000 kilometers. The replacement method is as follows: 1. Start the engine and warm it up to normal operating temperature; 2. Remove the drain plug to allow the transmission fluid to flow out; 3. After the old transmission fluid has completely drained, screw the plug back in; 4. Add new transmission fluid; 5. Start the car and perform gear shifting operations; 6. Check if the transmission fluid level is normal. The functions of transmission fluid are: 1. Keeping the shifting system clean; 2. Extending the service life of the transmission components; 3. Providing effective lubrication even at low temperatures; 4. Reducing fluid loss under severe operating conditions.
11
1
Share

Can Automatic Headlights Stay On All the Time?

Automatic headlights can stay on all the time. The correct way to use automatic headlights is: adjust the light combination switch to 'auto' to turn on the automatic headlights. At night, the automatic headlights will automatically turn on to ensure good driving visibility. When driving and encountering a sudden drop in light, the environmental headlights will automatically turn on, and they will automatically turn off when there is sufficient light. Additionally, they will automatically switch between high and low beams during nighttime encounters with other vehicles. The working principle of automatic headlights is: through the photosensitive sensor, a voltage signal is formed based on changes in external light, which is then fed back to the automatic headlight control module. After data analysis, it determines whether the lights should be turned on. The maintenance methods for automatic headlights are: 1. Regularly check the light cover to avoid water droplets; 2. Prevent impacts from foreign objects.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.