···
Log in / Register

How Many Bentley 4S Stores Are There Nationwide in China?

3 Answers
Everly
09/02/25 4:49am
Bentley currently has 14 4S stores nationwide in China. Below is the relevant information: Locations: Beijing Xinyuan Changsheng Auto Sales, Beijing Tianzhong Guangbo Auto Trading, Beijing Huatong Luhua Auto Trading, Beijing Tongze Jiaye Auto Sales, Beijing Baoli Xing Auto Sales, Beijing Xinrong Wangda Auto Sales, Beijing Zhongqi Guangda Auto Sales, Zhongxing Beifang (Beijing) Auto Sales, Beijing Zhongqi Kan Auto Trading, Shenzhen Jiahong Trading Development Co., Ltd., Tianjin Shoukai International Trading Co., Ltd., Beijing Hongzhan Auto Sales, Zhejiang Bentley Auto Sales & Service Co., Ltd., and Suzhou Best Choice Auto Sales Co., Ltd. Brand Introduction: Bentley (Bentley Motors Limited), a British luxury car brand, is headquartered in Crewe, UK. In 1919, Mr. W.O. Bentley founded Bentley Motors. "To build a fast car, a good car, the best in its class." was the original pursuit of excellence in car manufacturing by the founder, Mr. Walter Owen Bentley.
Was this review help?
12
0
Share
DelJameson
09/14/25 7:01am
I previously looked into Bentley's dealer network, and currently there are around 20-plus Bentley 4S stores nationwide, though the exact number may adjust annually. In mega-first-tier cities like Beijing, Shanghai, Guangzhou, and Shenzhen, there are typically two or three dealerships each. Emerging first-tier cities such as Hangzhou and Nanjing also host flagship stores. Provincial capitals in economically strong regions like Chengdu and Shenyang are covered, though the western regions have relatively fewer. I recommend checking the dealer map directly on Bentley China's official website—they recently opened new showrooms in Chongqing and Xiamen. If you're buying a car, don’t just focus on quantity; prioritize evaluating the store’s repair equipment and maintenance services. After all, poor after-sales service for a multi-million-dollar car would be quite frustrating.
Was this review help?
7
0
Share
Expand All
FaithLee
10/28/25 7:42am
To be honest, I can't remember the exact number of Bentley's 4S stores, but it's estimated to fluctuate around 25. In big cities like Shanghai's Lujiazui, there are ultra-luxury showrooms, and the one in Beijing's Sanlitun even offers customization services. Interestingly, some prospective buyers specifically fly from third-tier cities to purchase cars, as not every province has an authorized dealer. However, their after-sales service is quite good; even if there's no store in your city, you can find partnered luxury car repair centers in emergencies. Actually, it's more convenient now to schedule test drives through the official website—just enter your address to display the nearest store location.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

How Often Should Honda Transmission Fluid Be Changed?

When a Honda reaches approximately 40,000-60,000 kilometers in mileage or has been in use for about 2 years, it is necessary to change the vehicle's transmission fluid. However, the specific replacement interval should be determined based on the owner's driving frequency and habits. Below is relevant information: 1. Replacement Methods: When changing the transmission fluid, owners can choose between two methods—gravity drain and flush or machine-assisted fluid exchange. 2. Before replacing the fluid: The old transmission fluid must be completely drained, and the container should be thoroughly cleaned before adding new fluid. 3. If choosing the gravity drain method: First, loosen the drain plug at the bottom of the vehicle to allow the old fluid to drain out by gravity. After cleaning, new fluid can be added. The most direct advantage of this method is the simplicity of the entire process; however, the biggest drawback is that it cannot fully remove all the old fluid, leaving residual fluid inside the container.
9
2
Share

Why Does the Lavida Transmission Jerk?

The reasons for the Lavida transmission jerking include torque converter failure and transmission oil pump failure. Torque Converter Failure: Power transmission in the torque converter is interrupted, meaning there is no driving response when the torque converter engages any gear. This phenomenon is usually caused by two reasons: First, there is no working fluid in the torque converter. Since there is no mechanical connection between the pump wheel and the turbine in the torque converter, power is transmitted through the fluid as a medium. Without fluid, power naturally cannot be transmitted. Second, the turbine is loosened or stuck with the turbine shaft. Transmission Oil Pump Failure: Intake system leakage, excessively lean air-fuel mixture; incorrect timing, improper ignition advance angle; throttle position sensor or air flow meter failure; low fuel pressure; injector malfunction.
3
4
Share

Where is the ABS fuse located in the Mercedes-Benz B200?

The fuse box for the Mercedes-Benz B200 circuit is located under the hood, in the engine compartment, next to the battery. Fuse Overview: Automotive fuses are a type of current fuse. When the circuit current exceeds twice the rated current of the fuse, it will blow within seconds to protect the circuit. They are commonly used for overcurrent protection in automotive circuits and also for industrial equipment. Fuse Classification: Fuses can be divided into: mini blade fuses, small automotive fuses, medium automotive fuses, and large automotive fuses. The rated current ranges from 1-40 amperes (A) to large fuses of 30-120 amperes (A), with a rated voltage of 32 volts (V).
12
0
Share

What Causes the Noise When Starting a GAC Trumpchi?

GAC Trumpchi starting with noise is due to brake noise, especially for new cars or newly replaced brake pads. The brake discs and pads need to break in, and noise is quite common. Brake Principle: The working principle of brakes mainly comes from friction. By utilizing the friction between the brake pads and brake discs (or drums), as well as between the tires and the ground, the kinetic energy of the moving vehicle is converted into heat energy through friction, bringing the car to a stop. A good and efficient braking system must provide stable, sufficient, and controllable braking force, along with excellent hydraulic transmission and heat dissipation capabilities. This ensures that the force applied by the driver on the brake pedal is effectively transmitted to the master cylinder and each wheel cylinder, while avoiding hydraulic failure and brake fade caused by excessive heat. Maintenance Methods: Under normal driving conditions, inspect the brake shoes every 5,000 kilometers. Not only should the remaining thickness be checked, but also the wear state of the shoes, whether the wear on both sides is even, and whether they return freely. Any abnormal conditions must be addressed immediately.
11
5
Share

Why does the front left wheel of the Geely Geometry C make abnormal noises when passing over bumps?

The reason why the front left wheel of the Geely Geometry C makes abnormal noises when passing over bumps is due to deformation of the subframe. Effects of subframe deformation: Minor deformation of the subframe is a relatively serious issue. If the subframe is deformed, the wheel alignment data will be affected, which in turn impacts the vehicle's handling and driving stability. Function of the subframe: The subframe can be considered as the skeleton of the front and rear axles, forming part of their structure. The subframe is not a complete chassis but rather a bracket that supports the front and rear axles and suspension, connecting them to the "main frame," hence commonly referred to as the "subframe." The purpose of the subframe is to block vibrations and noise, reducing their direct transmission into the cabin. Therefore, subframes are mostly found in luxury sedans and SUVs, with some vehicles even equipping subframes for the engine. In traditional unibody designs without subframes, the suspension is directly connected to the body panels.
1
0
Share

What is the appropriate tire pressure for the Macan?

According to the international GBT2978-2008 standard, the tire pressure for different Macan tires is as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar. Tire pressure, strictly speaking, refers to the air pressure inside the tire. Normal tire pressure in winter: In winter, the tire pressure should be based on the standard tire pressure of the car, with an appropriate increase of about 0.2 bar. Normal tire pressure in summer: Generally, the lower limit of the standard tire pressure is sufficient. For example, the lower limit for standard tires is 2.4 bar. If the car is often parked outdoors, the tire pressure can generally be about 0.1 bar lower than the standard to avoid tire blowouts due to high temperatures.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.