How many 7-seater models does Volvo have?

1 Answers
SanCaroline
07/30/25 3:53am
Volvo has only one 7-seater model, the Volvo XC90. This vehicle measures 4807mm in length, 1898mm in width, and 1784mm in height, with a wheelbase of 2857mm. It features full-time four-wheel drive, with a double-wishbone independent front suspension and a multi-link independent rear suspension. The Volvo XC90 is equipped with two engine options: a 2.0T low-power version and a 2.0T high-power version. The low-power 2.0T engine delivers a maximum power of 187kW and peak torque of 350Nm, while the high-power 2.0T engine produces 235kW maximum power and 400Nm maximum torque.
Was this review help?
6
0
Share
More Forum Discussions

Where are the drainage holes on the Volkswagen Lavida's doors?

Volkswagen Lavida's door drainage holes are located at the bottom of the door panel, approximately in the middle position. Generally, there are two drainage holes per door. The function of Lavida's door drainage holes: In addition to draining water, the door drainage holes also protect the electrical equipment inside the door and prevent rust inside the car door, which could damage components such as the door lock mechanism and latch. Dealing with clogged door drainage holes: Check if the door's sealing strip has failed or is damaged, as this can allow rainwater to easily enter the door interior, leading to damage of the waterproof membrane inside. Inspect whether the waterproof membrane is damaged. If it is, rainwater will flow through the gaps onto the door sill, and over time, the drainage holes may become clogged with dust. In this case, the waterproof membrane needs to be replaced. Check if the drainage holes are clogged. If they are, they need to be unclogged using a hard object like a wire to clear the blockage, or the door can be disassembled to clean the interior thoroughly.
11
1
Share

What is the reason for the inability to adjust the front seats of a Jaguar?

Jaguar front seats cannot be adjusted due to wiring issues. The following items were inspected and measured for this vehicle: 1. Inspection: Checked the fuse power supply and grounding of the right front seat, both normal; Upon removing the connector of the right front seat control unit, signs of water ingress and corrosion were observed, and visual inspection also revealed water ingress and corrosion on the right front seat control unit; Checked the air conditioning drain outlet, normal, and the sky drainage is normal; Inspected the front and rear carpets, no wetness or water accumulation found, and the right front door window lift operates normally; External gutter drainage is normal with no blockages, and a leak check at the right front door area showed no signs of water leakage. 2. Measurement: Measured the seat control unit wiring harness, no open or short circuits found, power supply and grounding are normal, CAN line is normal; Measured the right front seat adjustment switch wiring harness, no open or short circuits found, connector shows no corrosion, and pins are properly connected.
9
2
Share

What is the wading depth of the Honda Avancier?

The wading depth of the Honda Avancier is approximately 65cm. Below are specific details about the Honda Avancier: 1. Configuration: The Avancier is equipped with an ANC active noise cancellation system, a large-capacity sliding center console with dual-opening design for the front seats, and a rear central control system with audio control buttons. 2. Powertrain: It features two powertrain options - a 1.5T and a 2.0T engine. The mid-to-low trim models are equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 193Ps, maximum power of 142kW, peak torque of 243N.m, paired with a CVT continuously variable transmission. The high-end trim models come with a 2.0T direct-injection VTEC turbocharged engine, producing a maximum horsepower of 272Ps, maximum power of 200kW, peak torque of 370N.m, mated to a 9-speed automatic transmission.
18
3
Share

What type of fuel does the Mercedes-Benz B200 use?

Mercedes-Benz B200 uses 95 and 98 octane fuel. The actual fuel consumption of the 2020 Mercedes-Benz B200: The actual fuel consumption per 100 kilometers for the 2020 Mercedes-Benz B200 is 6.2 liters, which is relatively low. This engine has a small displacement and features cylinder deactivation for energy saving, making it a car with good fuel economy. Pros and cons of the Mercedes-Benz B200: The interior materials are of high quality, mainly soft and leather materials. In terms of driving quality, the steering wheel has no play, and the chassis is very stable. However, as an imported car, it offers guaranteed quality, though the suspension is on the stiff side, rear seat comfort is average, and the power is just adequate. Being a niche imported model with low ownership numbers, the maintenance costs in the long run are relatively high.
1
1
Share

How to Open the Panoramic Sunroof on Nissan X-Trail?

The sunroof switch of the X-Trail adopts the rotary knob-style switch commonly found in Nissan vehicles. The slider button offers three sunroof opening positions: small opening, half opening, and full opening. By sliding the knob, you can control the opening area of the sunroof and close it. Below is more information about the Nissan X-Trail: 1. The Nissan X-Trail, known as 'Qijun' in Chinese, was launched in Japan at the end of 2000, directly competing with rivals like the Toyota RAV4 and Honda CR-V. 2. The X-Trail has body dimensions of 4630/1785/1685mm (length/width/height) with a wheelbase of 2630mm. It is equipped with an intelligent all-mode 4WD system, allowing drivers to freely choose between 2WD, automatic, or locked 4WD modes to handle various road conditions. The 2WD mode effectively maintains low fuel consumption during daily driving.
5
2
Share

What is the working principle of the center differential?

The working principle of the center differential is as follows: 1. Power input of the differential: The driven gear (bevel gear) drives the rotation of the differential housing. 2. Power output of the differential: Two side gears, connected to the drive shafts (also known as half-shafts) on both sides, transmit power to the wheels on both sides. 3. Rotation of the planetary gears: This refers to the rotation of the planetary gears around the planetary gear shafts. 4. Revolution of the planetary gears: This refers to the rotation of the planetary gears around the axis of the side gears. Information about the center differential is as follows: 1. The function of the center differential is to transmit power to both half-shafts while allowing them to rotate at different speeds, ensuring that both wheels travel at varying distances in a pure rolling motion as much as possible, thereby reducing friction between the tires and the ground. 2. Common differential locks generally include the following types: forced locking type, high-friction self-locking type, jaw clutch type, Torsen type, and viscous coupling type.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.