How many 6-cylinder engine models are available around 300,000 yuan?

1 Answers
VonCorbin
07/29/25 4:43pm
Currently, there are relatively few models on the market around 300,000 yuan equipped with six-cylinder engines, such as the Palisade, Hongqi H7, Hongqi HS74, and Beijing BJ80. The following is extended information about six-cylinder engines: 1. Displacement range: The displacement of inline six-cylinder engines equipped in cars mostly ranges between 2 to 5 liters (120 to 310 cubic inches). Although there are inline six-cylinder engines with smaller displacements, the smoothness they offer cannot offset the high design and production costs, making them extremely rare. 2. Balance: A MAN-built 6S60MC inline six-cylinder low-speed diesel engine. This engine is used in a 70,000-ton bulk carrier, with a single unit capable of outputting 9,014.8 kilowatts of power and 703,130 pound-feet of torque (at 90.3 rpm). 3. Definition: An inline six-cylinder engine (English: Straight-six engine), abbreviated as straight-six, I6, or L6, refers to an engine structure with six cylinders arranged in a straight line.
Was this review help?
18
5
Share
More Forum Discussions

Where is the engine of the Rich 6 produced?

The engine of the Rich 6 is produced and supplied by Mianyang Xinchen, all domestically made. Power of the Rich 6: The Rich 6 has been upgraded with the same M9T model 2.3T diesel engine as the overseas version of the Navara, with a maximum power of 120kW and a peak torque of 380Nm. This engine has 163 horsepower, four cylinders, a maximum power speed of 3500rpm, and a peak torque speed range of 1500-2500rpm. Design of the Rich 6: The highlight of the Rich 6 is the newly introduced 2.3T diesel engine, codenamed M9T, developed by the Renault-Nissan Alliance. It is also used in the overseas version of the Navara and the Mercedes-Benz X-Class, featuring technologies such as electronically controlled high-pressure direct injection and turbocharged intercooling.
11
4
Share

What Causes Consistently Low Tire Pressure in One Wheel?

The reasons for low tire pressure in a car tire are as follows: 1. Air leakage from the tire or valve stem, which requires inspection at a tire shop. 2. Wheel rim deformation, leading to reduced tire sealing performance. 3. Long-term overloading of the vehicle, causing uneven tire stress. 4. Thermal expansion and contraction; due to manufacturing variations in tires, thermal expansion and contraction may result in insufficient tire pressure. Below are the dangers of low tire pressure, remedies, and an explanation of the principle behind low tire pressure: The danger of low tire pressure lies in the increased risk of a blowout. It is advisable to observe all four wheels when exiting the vehicle; low air pressure can often be seen visually. If not visible, please visit an auto repair shop to measure the air pressure. When driving with low tire pressure, the tire's sidewall repeatedly folds and unfolds significantly during rotation, generating substantial heat. Additionally, the sidewall structure becomes more prone to fatigue, leading to broken cords and tire body rupture, which can cause a blowout.
14
5
Share

What are the pros and cons of car cruise control?

The pros and cons of car cruise control are as follows: 1. Pros: There is no need to control the accelerator pedal, which reduces fatigue and unnecessary speed changes, thereby saving fuel. 2. Cons: When using cruise control, many drivers take their feet off the brake pedal. In case of an emergency, the braking time will be slower than when the foot is on the brake, significantly increasing the risk of a collision. Information about cruise control is as follows: 1. Cruise Control (CRUISE-CONTROL-SYSTEM): Also known as a speed control system or autonomous driving system, its function is to automatically maintain the vehicle speed as set by the driver without the need to press the accelerator pedal, allowing the vehicle to travel at a fixed speed. 2. How the cruise control system works: The cruise control component reads the pulse signal from the vehicle speed sensor and compares it with the set speed, then issues commands to the servo mechanism to adjust the throttle opening to increase or decrease, ensuring the vehicle maintains the set speed.
17
1
Share

How many years after license revocation can one retake the test?

If a hit-and-run traffic accident constitutes a crime leading to license revocation, the driver is permanently banned from obtaining a license again. Below are the relevant requirements for applying for a motor vehicle driver's license: 1. Age requirements: Applicants for small cars, small automatic transmission cars, small automatic transmission passenger cars for the disabled, or light motorcycles must be between 18 and 70 years old. Applicants for low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery must be between 18 and 60 years old. 2. Physical requirements: Height: Applicants for large buses, tractors, city buses, large trucks, or trolleybuses must be at least 155 cm tall. Applicants for medium-sized buses must be at least 150 cm tall. Vision: Applicants for large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, or trams must have uncorrected or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart.
16
3
Share

What Causes the Abnormal Noise When a Volkswagen Goes Over Speed Bumps in Winter?

Abnormal noises when a Volkswagen goes over speed bumps in winter are usually caused by aging or cracked components near the stabilizer bar, or by faulty shock absorbers. In such cases, it is recommended to seek professional maintenance personnel for inspection and repair. If abnormal noises occur when going over speed bumps, you can park the car on level ground and have one person stand on each side of the car, vigorously shaking it from side to side. If a creaking noise is heard, the rubber buffer blocks on the stabilizer bar may be the issue. In this case, it is advisable to repair the stabilizer bar or replace the components. If there has been no rain or car washing, check the shock absorber housing or dust cover for any oil leakage. Alternatively, during low-speed driving, if the wheels pass over road bumps or experience slight vibrations accompanied by a 'kong kong' sound, this indicates abnormal noise caused by damaged shock absorbers. If the shock absorbers are faulty, they can only be replaced and cannot be repaired.
11
4
Share

How many meters away should the warning sign be placed from the direction of oncoming traffic for a broken-down vehicle?

When a motor vehicle breaks down on the highway, the warning sign should be placed 150 meters away from the direction of oncoming traffic. Below is a detailed introduction to the placement of accident warning signs: 1. Relevant laws and regulations: According to Article 68 of the Road Traffic Safety Law of the People's Republic of China, when a motor vehicle breaks down on the highway, the provisions of Article 52 of this Law shall apply. However, the warning sign should be placed 150 meters away from the direction of oncoming traffic, and the occupants should quickly move to the right shoulder or emergency lane and promptly call the police. 2. Accident handling measures: When a motor vehicle breaks down on the road and needs to be stopped to fix the issue, the driver should immediately turn on the hazard warning lights and move the vehicle to a place where it does not obstruct traffic. For vehicles that are difficult to move, the hazard warning lights should remain on, and warning signs should be placed in the direction of oncoming traffic to increase the warning distance. If necessary, the police should be called promptly.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.