How long should I wait for the second attempt at Subject 1?

2 Answers
SavannahDella
07/24/25 6:39pm
A week to half a month later, you can make another appointment. 1. Make-up exam: Each subject is examined once, and if you fail, you can take a make-up exam once. If you do not take the make-up exam or still fail the make-up exam, the exam will be terminated, and the applicant should make a new appointment for the exam. 2. Subject 1: Refers to the driver's theory test, which is conducted at the vehicle management office and is a mandatory licensing exam for all driver's license applicants. The test content includes the most basic knowledge such as driving theory basics, road safety laws and regulations, traffic signals, traffic rules, as well as local regulations. The scheduling of the driver's theory test is arranged by the local vehicle management offices.
Was this review help?
6
3
Share
MichaelMarie
08/11/25 10:24am
Last time I failed the subject one test, and I have to wait 10 days before I can schedule a retake. This interval is quite considerate, just enough for me to review the key points of traffic regulations again. I downloaded the Driving Test Treasure App and practice mock questions every day, focusing on those tricky sections like yielding rules for turns and overtaking regulations. Don’t rush during the preparation stage—keeping a calm mindset and carefully reading each question during the exam will help avoid missing any options. Of course, regulations may vary in different cities, especially in metropolitan areas where the waiting time might be longer, so it’s best to check with the driving school in advance to confirm the specific interval. Don’t forget to bring your ID card—passing the test will give you peace of mind when driving. During my review, I also looked into some basic car maintenance knowledge, finding these interconnected topics even more useful.
Was this review help?
2
1
Share
Expand All
More Forum Discussions

Does the Jaguar F-Type have a supercharged model?

Jaguar F-Type does have a supercharged model, with the supercharged version featuring a 3.0L displacement, while the turbocharged model has a 2.0L displacement. The Jaguar F-Type is a two-door sports car under the Jaguar brand. Taking the 2021 Jaguar F-Type All-Wheel Drive Hardtop version as an example, its body dimensions are: length 4470mm, width 1923mm, height 13111mm, with a wheelbase of 2622mm. The 2021 Jaguar F-Type All-Wheel Drive Hardtop version is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 380PS and a maximum power of 280kW, paired with an 8-speed automatic manual transmission. Both the front and rear suspensions adopt a double-wishbone independent suspension system.
2
5
Share

What to Do When the Envision Runs Out of Power?

The Envision requires waiting for assistance from a 4S shop when it runs out of power because its battery is not a regular one but a specialized AGM battery for start-stop systems, which has a different charging method and cannot be charged independently. Taking the Envision 2021 2WD Leading Edition as an example, it is a 5-door, 5-seat SUV under SAIC-GM Buick, with body dimensions of 4694mm in length, 1839mm in width, and 1686mm in height, a wheelbase of 2750mm, and a fuel tank capacity of 66 liters. The Envision 2021 2WD Leading Edition is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169 PS and a maximum power of 124 kW.
19
0
Share

What does EPC mean when it appears on a vehicle?

The appearance of EPC on a vehicle indicates a malfunction in the mechanical and electronic systems. The possible causes of this fault are: 1. Intake system failure; 2. Dirty throttle body with excessive carbon deposits; 3. Use of substandard fuel; 4. Abnormal cylinder pressure; 5. Occasional faults or false alarms; 6. Valve failure. The solutions for EPC appearing on a vehicle are: 1. Clean the throttle body; 2. Inspect the brake switch and wiring. EPC on a vehicle stands for Electronic Power Control system. When a sensor fails or detects abnormal conditions, the control system will take appropriate measures according to the preset program.
2
2
Share

What transmission does the Toyota Prado 4000 use?

Toyota Prado 4000 uses a 6-speed automatic manual transmission produced by Aisin. The Toyota Prado 4000 is an SUV model with body dimensions of: length 4970mm, width 1875mm, height 1895mm, wheelbase of 2790mm, and a fuel tank capacity of 87 liters. The Toyota Prado 4000 is equipped with a 4.0L naturally aspirated engine, delivering a maximum horsepower of 243PS and a maximum torque of 376 Nm. Its front suspension adopts a double-wishbone independent suspension, and the rear suspension uses a four-link mechanism suspension. In terms of configuration, it features a power-adjustable suspension system, multi-terrain selection system, and low-speed control system.
19
2
Share

Is Skoda a Domestic or Joint Venture Car?

Skoda is a joint venture car, utilizing German production technology. It is a brand under SAIC Volkswagen, but all intellectual property rights belong to Volkswagen AG in Germany. Taking the Skoda Superb as an example, it is a 5-door, 5-seater midsize car with body dimensions of 4869mm in length, 1865mm in width, and 1489mm in height, with a wheelbase of 2841mm. The Skoda Superb is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110 kilowatts and a maximum torque of 250 Newton-meters. It features a front MacPherson independent suspension and a rear four-link independent suspension, paired with a 7-speed dual-clutch transmission.
2
1
Share

What are the precautions for clutch maintenance?

Precautions for clutch maintenance include: 1. Gasket: Replace paper sealing washers and O-rings; 2. Shim: Use a micrometer to measure the shim at multiple points to accurately determine the required thickness, check if the edges of the shim are damaged, and install a good shim; 3. Retaining ring and lock ring: Do not overstretch the retaining ring and lock ring, and ensure they are fully seated in the groove; 4. Bolts and nuts: Bolts and nuts for fixing covers and housings should be tightened and loosened in a cross pattern, and tightened to the specified torque; 5. Bearing: Install the needle bearing with the marked side facing the installation tool, and apply a layer of lubricating oil between the shaft and the bearing.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.