How long should a new 72V battery be charged for the first time?

1 Answers
AlyssaLee
07/29/25 10:22pm
For the first charge of a 72V electric vehicle, it is recommended to charge it for 8 hours according to the manufacturer's advice, until the battery is fully charged. Range of a 72V electric vehicle: Taking a 72V24Ah battery with an 800W motor and an average speed of 45km/h as an example, the average current at constant speed is 11.1A (motor power/voltage), the theoretical driving time is 2.16h (battery capacity/average current), and the theoretical range is about 97 kilometers (theoretical driving time × average speed). Extending charging frequency: If the daily power consumption of the electric vehicle is not much, only about 10%, you can consider extending the charging frequency, such as charging once a week. When the daily power consumption is 20%-30%, you can consider charging every two or three days. If the daily power consumption is 40% or more, it is recommended to charge once a day, controlled at about 5-6 hours.
Was this review help?
20
0
Share
More Forum Discussions

How to Adjust Roewe Rearview Mirrors?

Adjust the left and right positions so that the left edge of the mirror just cuts off your right ear in the reflection. For the up and down positions, place the distant horizon in the center, and adjust the left and right positions so that the car body occupies 1/4 of the mirror's area. When adjusting the up and down positions of the right rearview mirror, ensure a larger ground area is visible. Similarly, adjust the left and right positions so that the car body occupies 1/4 of the area.
1
0
Share

How to Resolve the P0420 Trouble Code?

When the P0420 trouble code appears in a vehicle, it primarily indicates that the catalytic converter's efficiency is below the threshold value. The likely cause is a damaged catalytic converter. Here are three quick solutions to address the P0420 trouble code: 1. Replace the vehicle's original catalytic converter: Be sure to avoid aftermarket parts, as they may not last long and the warning light could reappear. 2. Install a component: Use parts like the TDTAS trouble code eliminator to repair the data and clear the P0420 warning light. 3. ECU backend deactivation: Access the engine ECU backend using a car diagnostic tool and disable the P0420 trouble code.
7
4
Share

What to Do About High Fuel Consumption in Nissan Sylphy?

First, check the oxygen content in the exhaust gases from the tailpipe. If there are no abnormalities, you may be able to rule out a faulty oxygen sensor. Always pay attention to the condition of your vehicle's spark plugs and replace them regularly. It could also be due to not cleaning the undercarriage for a long time, which increases driving resistance. The undercarriage should be thoroughly cleaned. If the tire pressure is too high or too low, it can also increase fuel consumption. Therefore, manufacturers generally provide users with the optimal tire pressure value.
3
0
Share

What to Do When Car Fuel Tank Pressure is Too High?

If the fuel tank cap pressure regulator valve is clogged, it can cause excessively high pressure inside the fuel tank. In this situation, it should be disassembled and thoroughly cleaned. If the fuel tank is overfilled during refueling, some fuel may evaporate and enter the carbon canister, forming particles inside that can cause blockages. If the solenoid valve is damaged, the engine's pipeline system cannot properly ventilate to form a circuit, preventing fuel vapor from being released and thus causing internal pressure to rise. When fuel tank pressure is too high, it is necessary to promptly clean the fuel lines or replace the filter. Fuel tank cleaning is divided into two steps: internal and external.
3
1
Share

What is the reason for the SYS warning light in a car?

The SYS warning light on the car dashboard indicates a minor fault in the engine system. It is generally caused by abnormal air intake or ignition issues. Below are the hazards of irregular car maintenance: 1. Clogged air filter: A blocked or excessively dirty air filter can cause poor engine air intake, allowing large amounts of dust to enter the cylinders. This accelerates carbon buildup in the cylinders, leading to poor ignition, reduced power, and naturally increased fuel consumption. 2. Increased sludge: There are many reasons for sludge buildup at the valves, including carbon deposits formed from fuel combustion exhaust at the throttle body, as well as impurities not filtered by the air cleaner that accumulate at the throttle body. Excessive sludge can cause air intake resistance, leading to increased fuel consumption.
4
4
Share

How much refrigerant should be added to the Baojun 730?

Baojun 730 requires approximately 4 to 5 bottles of refrigerant. The function of refrigerant is to utilize its physical changes to remove heat from the vehicle. Under high pressure, the refrigerant forms a liquid while releasing heat. The effects of overfilling refrigerant include: 1. Increased pressure in the air conditioning system, triggering high-pressure alarms and frequent compressor shutdowns; 2. Reduced cooling efficiency; 3. Damage to air conditioning components; 4. Risk of bursting air conditioning pipes. The method for discharging excess refrigerant is: 1. Prepare a car refrigerant recovery and filling machine along with a refrigerant tank; 2. Connect the machine's pipes to the high and low-pressure pipes of the car's air conditioning system; 3. Set the required refrigerant recovery capacity and initiate the recovery process.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.