How Long is the Warranty Period for Cadillac?

1 Answers
DiHadley
07/30/25 5:15am
The warranty period is calculated based on the invoice date. The vehicle quality assurance period is 3 years with unlimited mileage. For all Cadillac 'China VI' models, the powertrain warranty is extended to 8 years or 160,000 kilometers. Here is some additional information: Cadillac: The famous wreath and crest emblem chosen by Cadillac symbolizes its leadership position in the automotive industry. This profound and exquisite emblem also represents the Cadillac family's historical status as royal nobility, reflecting the courage and honor of the ancestors of Detroit's founders. The wreath emblem is derived from the coat of arms used by Mr. Cadillac. Although the Cadillac emblem was not registered as a trademark until 1906.
Was this review help?
5
4
Share
More Forum Discussions

What does the car mode mean?

The mode button in the car represents a mode and is used to switch multimedia modes. Here is more information about mode: Mode translates to mode or direction, and the mode button is commonly found on multifunction steering wheels and center consoles. If the mode is on the multifunction steering wheel, it is basically a button that controls the switching of car multimedia, used to switch between FM radio, AM radio, CD, or USB modes. If the mode button is located in the air conditioning control area of the center console, it is used to switch the car's air conditioning air outlet mode, generally switching between foot blowing, head blowing, and windshield blowing modes. Mode is used to switch multimedia modes, specifically switching between AM, FM, and USB modes. Generally, cars have working modes, such as sports mode, snow mode, off-road mode, etc.
5
3
Share

What does fault code B133029 mean?

Fault code B133029 means: The vehicle anti-theft alarm system has an intermittent alarm, and the anti-theft alarm sensor has an unreliable signal. Below is an extended introduction to the fault code: After troubleshooting the vehicle, it is often necessary to clear the fault code. When clearing the fault code, it is essential to strictly follow the specific method designated for the particular vehicle model. Under no circumstances should the negative battery terminal be disconnected as a simple and arbitrary method to clear the fault code. Otherwise, it may lead to the following two issues: 1. Some vehicle models' control computers may lose "historical records." Most vehicle models' central computers have memory functions. If the negative battery terminal is disconnected, the engine operation data stored in RAM (random access memory) will be automatically cleared. This is why some people find that after maintenance and clearing, the vehicle's performance remains poor for a long time, or the previous fault code reappears shortly after driving. 2. It may cause the loss of normal functions. A common example is the audio lock function. In such cases, a complicated repair procedure is required to decrypt the audio system before its original functionality can be restored.
9
5
Share

Is Passing Through After the Yellow Light Comes On Considered Running a Red Light?

Yes, it is considered running a red light. Both running a yellow light and running a red light fall under the same traffic violation—driving a motor vehicle in violation of traffic signal regulations. According to Article 90 of the "Road Traffic Safety Law," drivers who fail to obey traffic signals will be penalized with 6 demerit points and a fine of 200 yuan. The "Road Traffic Safety Law of the People's Republic of China," Article 26, stipulates: Traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. The "Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China," Article 38, specifies the meanings of motor vehicle and non-motor vehicle traffic signals: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motor vehicle or pedestrian crossing signals, non-motor vehicles and pedestrians should follow the motor vehicle traffic signals. When the red light is on, right-turning vehicles may proceed if they do not obstruct the passage of other vehicles or pedestrians. Electronic surveillance captures red-light violations based on the following three photos, which are reviewed by traffic police to determine whether a violation occurred: An image of the vehicle not having passed the stop line when the red light is on. An image of the vehicle's front wheels crossing the stop line. An image of the vehicle's entire body having crossed the stop line. If these three photos show that the vehicle moved beyond the stop line while the red light was on, the traffic police can confirm it as a red-light violation during review. To avoid running a yellow light: Slow down when approaching an intersection, maintain a speed of 20–30 km/h, keep a safe distance from the vehicle ahead, and avoid tailgating or rushing through the yellow light. Alternatively, pay attention to the traffic signals in advance—observe the duration of the green light when it is on. If traffic is light and the green light has been on for a long time, prepare to slow down.
11
2
Share

When is the Best Time to Change Engine Oil?

The optimal time for changing engine oil depends on the type of oil used. Here are the details: 1. Mineral oil should generally be changed every six months or approximately 5,000 kilometers. 2. Semi-synthetic oil should be changed every 7 to 8 months or around 7,500 kilometers. 3. Full synthetic oil should be changed annually or approximately every 10,000 kilometers. Below are the steps for changing engine oil: 1. Run the engine until it reaches operating temperature. 2. Engage the handbrake and lift the vehicle. 3. Unscrew the oil filter and drain the old oil. 4. Apply new oil to the gasket of the new oil filter. 5. Pour the new oil into the oil pan. 6. Check for leaks underneath the engine. 7. Lower the vehicle, check the oil dipstick, and start the engine. 8. Turn off the engine and recheck the oil level.
20
2
Share

What are the differences between the C-Class and E-Class?

The differences between the C-Class and E-Class are as follows: 1. Exterior and interior. The dimensions of the Mercedes-Benz C-Class and E-Class differ first. The E-Class is more spacious in all dimensions compared to the C-Class, especially in terms of wheelbase and overall length. The interior of the E-Class differs significantly from the C-Class and can be distinguished almost at a glance. The E-Class features many configurations from the S-Class, such as dual 12.3-inch LCD displays, holographic intelligent headlights, etc., making it worthy of being called a "mini S-Class." In high-end models, the central console and instrument panel are equipped with 12.3-inch dual LCD displays with a resolution of 1920*720, offering a strong sense of technology. 2. Positioning. The E-Class is a mid-to-high-end executive sedan, competing with the BMW 5 Series and Audi A6 Series. It comes in sedan and wagon versions. It mainly targets successful business executives, individuals who prefer mid-sized cars for both work and personal use, those who appreciate the advantages of five-door wagons (seven seats), people who want to maintain a sedan's character, and professionals. Depending on the production year, its chassis evolved from the WDB124—210—211 series. The C-Class series includes commercial and family vehicles, offering four-door and five-door versions, with three styles available for each model. The main buyers are those who want to drive a safe, high-quality, and comfortable compact car, modern women, and fashion-forward young people. Depending on the production year, its chassis evolved from the WDB202—203 series.
20
5
Share

Does Insurance Need to Be Transferred When Transferring Vehicle Ownership?

When transferring vehicle ownership, the insurance also needs to undergo transfer procedures. According to relevant provisions of the Insurance Law, during the validity period of the insurance, if the vehicle is sold, transferred, gifted to others, or its use is changed, the insured must notify the insurance company in writing and apply for policy endorsement. Otherwise, the insurance company has the right to refuse compensation. Therefore, when transferring vehicle ownership, the auto insurance must either be transferred or canceled. Auto insurance is divided into compulsory traffic insurance (CTI) and commercial insurance, and the transfer procedures for these two types of insurance differ. CTI Transfer: According to the "Compulsory Traffic Insurance Regulations," CTI cannot be canceled in principle during the sale of a used vehicle. The only exception is when the vehicle is sold in a different location, in which case the new owner can purchase a new CTI policy in the new registration area. In this scenario, the new owner must bring their ID card, new vehicle license, used vehicle transfer documents, and the newly issued CTI policy to the original owner's insurance company to cancel the old policy. Commercial Insurance Timely Transfer: After transferring ownership of a used vehicle, it is essential not only to focus on the CTI transfer but also to pay attention to the commercial insurance. For locally purchased used vehicles, the transfer requires both the new and original owners to bring the original policy, ID cards, new vehicle license, and transfer certificate to the original insurance company for processing. Documents required from the original owner for the transfer include the vehicle registration certificate, vehicle license, and ID card. The buyer needs to provide an ID card, and if they are from another region, a residence permit or temporary residence certificate is also required. Vehicle transfer first requires a vehicle evaluation. The evaluation fee is generally 1%-2% of the assessed vehicle price, and other costs include license plate and vehicle license fees. The original owner's commercial insurance can be canceled (CTI cannot be canceled), or the insurance can be transferred to the new owner at the insurance company. Precautions for Buying Used Vehicles: Incomplete documentation: Complete documentation for a used vehicle includes the vehicle registration certificate (or original purchase invoice), vehicle license, vehicle purchase tax payment certificate, road maintenance fee records, and CTI. Missing vehicle registration certificates or licenses, or unpaid CTI or road maintenance fees, can cause endless trouble for the buyer. Therefore, if the seller cannot provide complete documentation, the buyer should be particularly cautious. Tampering with the odometer: Most consumers judge a vehicle's condition based on the odometer, and sellers often take advantage of this by tampering with it. The odometer is not just a record of usage intensity but also an indicator for the maintenance and replacement of other vehicle components. If the buyer follows maintenance schedules based on a tampered odometer, it can lead to a series of potential safety hazards. New paint covering "injuries": When purchasing a used vehicle, if the car has been repainted and there are signs of repairs around the front, rear, or A, B, and C pillars, the vehicle may have been involved in a major accident. "Tuning the heart" to raise the price: Many consumers focus too much on the vehicle's "heart" (engine) and neglect the health of the car body. Sellers exploit this by replacing engine components to make the vehicle's "heart" appear younger, thereby inflating the price.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.