···
Log in / Register

How Long is the Warranty for the Focus Battery?

3 Answers
CarolineAnn
09/01/25 4:32am
The warranty for the Focus battery is one year. The Focus is a compact sedan under Changan Ford. Taking the 2021 Focus Automatic Fengyue model as an example, its body dimensions are: length 4647 mm, width 1810 mm, height 1468 mm, with a wheelbase of 2705 mm. The 2021 Focus Automatic Fengyue model is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 90 kW, with the maximum power achieved at 6500 rpm, and a maximum torque of 153 Nm, with the maximum torque achieved at 4500 rpm. It features a MacPherson independent front suspension and a torsion beam non-independent rear suspension.
Was this review help?
4
0
Share
Alexandra
09/13/25 7:17am
I remember the battery warranty for the Ford Focus is usually around two years, which is pretty standard for many friends' new cars. As an owner, I think it's crucial to be aware of this because replacing a dead battery can be a significant expense. Within the first two years, if the battery fails, the manufacturer typically replaces it for free, but after the warranty expires, you'll have to pay out of pocket. A battery's lifespan is generally three to four years, so it's best to avoid leaving the car turned off with electronics running for extended periods to prolong its life. Also, regularly check and clean the battery terminals to prevent corrosion, and pay extra attention to keeping it warm in winter. My car's battery died after three years, but fortunately, I had checked the warranty card beforehand and avoided unnecessary costs. The warranty details are all written in the vehicle's manual, so I recommend giving it a read as soon as you get the car to avoid any hassle when it matters most.
Was this review help?
13
3
Share
Expand All
JocelynMarie
10/27/25 8:05am
I've been driving a Focus for the past few years, and the battery warranty is standard for two years. I think it's quite cost-effective since you don't have to worry about issues in the first two years. Batteries tend to fail in extreme weather, like during summer heat or winter cold—don't overlook this detail; proper maintenance can save you a lot of hassle. Replacing a new battery costs a few hundred bucks, and a standard model will do just fine—don't get tricked into buying an expensive one. Nowadays, many car batteries have short lifespans; my neighbor's car battery died after just one year, and he ended up paying out of pocket because he didn't check the warranty. Remember to start the car regularly to avoid deep discharge from long-term parking. Using a charger for routine maintenance is simple and extends the battery's lifespan.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

Where is the temperature display on the BMW X3?

The BMW X3 is not equipped with a water temperature gauge, so the water temperature cannot be viewed. If the water temperature is too high, a high-temperature warning will be displayed on the dashboard. The dashboard only has an oil temperature gauge, and an oil temperature between 100~120 degrees is considered normal. Causes of rising water temperature: Poor engine cooling. Prolonged use without cleaning the internal and external dirt of the radiator affects the circulation and cooling of the radiator coolant. Fan damage or failure of other cooling components to assist the radiator in cooling in a timely manner, among other issues, can cause the coolant in the radiator to reach boiling point. Solutions for high water temperature: If the temperature is too high or the temperature indicator light keeps flashing, stop the vehicle to check whether the radiator coolant is normal and inspect the radiator, hoses, and all connections for leaks. If no abnormalities are found during the external inspection, you can replenish the coolant as required and continue driving.
5
5
Share

What causes the Volkswagen Lavida to shake when accelerating to 60 mph?

The reasons why the Volkswagen Lavida shakes when accelerating to 60 mph are as follows: Dirty throttle body or excessive carbon buildup in fuel injectors: After driving for a certain mileage, a dirty throttle body can cause it not to close properly or the idle stepper motor to get stuck, both of which can lead to high engine idle speed. Carbon buildup generated during engine operation can also cause vehicle shaking. Solution: When the vehicle experiences shaking, the first step is to inspect the throttle body and fuel injectors. If excessive dirt or carbon buildup is found, they should be cleaned promptly. Worn engine mounts: Vehicle shaking can sometimes be related to aging engine mounts. Engine mounts are essentially the shock absorption system of the engine, responsible for absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations can transfer to the steering wheel and the cabin, causing shaking at idle. Solution: If the shaking at idle does not decrease when the vehicle's air conditioning compressor is running, this type of shaking is likely caused by worn engine mounts, and they should be replaced promptly.
12
1
Share

What Causes Transmission Noise in a Bentley?

Transmission noise is typically caused by low or deteriorated transmission fluid levels, excessive or insufficient gear meshing clearance, poor gear engagement, excessive bearing clearance, or looseness between the bearing inner race and shaft or outer race and transmission housing. It is recommended to visit an authorized 4S dealership for immediate inspection and repair. Transmission Classification: Automotive transmissions primarily fall into two categories: manual and automatic. Manual transmissions consist mainly of gears and shafts, achieving speed and torque variation through different gear combinations. Automatic transmissions (AT), on the other hand, comprise a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system, utilizing hydraulic power transmission and gear combinations to achieve speed and torque variation. Maintenance Notes: For automatic transmission fluid replacement, owners must visit authorized service centers or specialized automatic transmission repair shops. Under normal circumstances, an automatic transmission vehicle should undergo cleaning and maintenance every 20,000 to 25,000 kilometers, or whenever symptoms such as transmission slippage, elevated engine temperature, delayed shifting, or system leakage occur.
10
0
Share

How to turn on the high beam of Trumpchi GS4?

To turn on the high beam of Trumpchi GS4, follow these steps: 1. Turn the ignition switch or start switch to the ON position. 2. Rotate the control lever on the lower left side of the steering wheel to the low beam position. 3. Push the control lever forward to activate the high beam headlights, and the corresponding indicator light will illuminate on the instrument cluster. The functions of the high beam are as follows: (1) It enhances the lighting effect. (2) It helps accurately judge path deviations, but the high beam does not always provide better visibility in all road conditions. In rainy or snowy weather, using the high beam can cause light scattering, and it is recommended to use fog lights instead.
19
4
Share

What car model is syv?

There is no car model called syv, only SUV models. SUV stands for Sport Utility Vehicle or Suburban Utility Vehicle, which refers to a suburban utility vehicle. It is a type of vehicle that combines the space functionality of a station wagon with the off-road capability of a pickup truck. Below are some characteristics of SUV models: (1) Strong power, off-road capability, spacious comfort, and excellent cargo and passenger-carrying functions. (2) Outstanding seating space performance, whether in the front or back row, passengers can sit comfortably in the car.
7
1
Share

What is the reason why the GAC Trumpchi key cannot be detected?

GAC Trumpchi key cannot be detected because the order of parking and turning off the engine is incorrect. You should shift to P gear first, then turn off the engine. If the order is reversed, the key cannot be detected and the car cannot be locked. Solution: Without stepping on the brake, press the start button to power on, then press the start button again to power off. If the auto-unlock function upon shutdown is set, you will hear the unlocking sound, and the issue of the key not being detected will not occur. Key usage precautions: The key contains an electronic circuit that triggers the anti-theft engine immobilizer system. If the circuit is damaged, the key may fail to start the engine. Avoid exposing the key to direct sunlight, high temperatures, or humid environments. Avoid dropping the key from a height or placing heavy objects on it. Avoid contact with liquids; if the key gets wet, immediately dry it with a soft cloth.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.