How long is the warranty for Mercedes-Benz air conditioning compressors?

2 Answers
McRachel
07/24/25 12:05am
Mercedes-Benz air conditioning compressors generally come with a warranty of 3 years or 100,000 kilometers. Choose the appropriate air conditioning fan speed setting: During normal vehicle operation, to prevent excessive frosting of the evaporator and ensure the proper functioning of the air conditioning system, the air supply speed and temperature control should not be set to the lowest setting for extended periods. When the vehicle speed is below 25 km/h, the fan speed switch should be set to the low-speed setting to avoid insufficient power generation and inadequate cooling. Duration of single air conditioning use: If the interior temperature has reached a comfortable level, the air conditioning can be turned off or intermittently used. Prolonged use of the air conditioning can cause excessive pressure on the condenser, leading to wear and tear on the cooling system. Therefore, it is advisable not to use the air conditioning for too long at a time.
Was this review help?
16
5
Share
DeKendra
08/10/25 7:52pm
As a Mercedes-Benz owner, I personally experienced an air conditioning issue. The compressor failed in the third year, and Mercedes' standard warranty covers 3 years with unlimited mileage, typically including the air conditioning system as long as there are no modifications or improper maintenance. I went to the 4S dealership and got the part replaced for free—the whole process was hassle-free and cost-effective. I recommend regular air conditioning maintenance, such as cleaning the filter and recharging the refrigerant, to prevent debris from damaging the compressor. Address any issues during the warranty period promptly; don’t wait until summer heat exposes the problem, as driving without AC can be uncomfortable and even dangerous. Always check the owner’s manual for specifics, as details may vary slightly by model, but most new vehicles come with this coverage.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

Can I pass the driver's license renewal with color weakness?

Driver's license renewal with color weakness can be passed as long as it is not red-green color blindness. Generally, if the color weakness is mild and the person can distinguish red and green, the license can be renewed. However, if the color weakness is severe, a hospital examination and evaluation are required to determine whether the driver's license can continue to be used. Below are the regulations from the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": 1. Vision: For applicants of large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or trams, the naked or corrected vision of both eyes must reach 5.0 or above on the logarithmic visual acuity chart. For other vehicle types, the naked or corrected vision of both eyes must reach 4.9 or above. 2. Color discrimination: Only color blindness disqualifies one from obtaining a driver's license, and specifically, only red-green color blindness disqualifies one, while other types of color blindness do not. How to determine color blindness or color weakness using color blindness test charts. "For example, the number 98, seen normally as 98 by those with normal color vision, can also be seen as 98 by those with color weakness, while those with color blindness may see it as 6. Color weakness is not checked during the examination.
7
1
Share

Can a Driver's License Be Used to Apply for a Mobile Phone Card?

A driver's license cannot be used to apply for a mobile phone card. Below are the specific details about driver's licenses: C1 License: Permitted vehicle type: small cars. This is an entry-level license, held by the majority of drivers, and allows driving vehicles with 9 seats or fewer. B1 License: Permitted vehicle type: medium-sized buses. This is an intermediate technical license, typically used for commercial vehicles such as urban minibuses and rural passenger minibuses. Fewer people hold this license. A3 License: Permitted vehicle type: city buses. This is an advanced professional license, specifically for operating commercial vehicles, exclusively for city buses, and includes the most basic permitted vehicle types. A2 License: Permitted vehicle type: tractor-trailers. This is an advanced, high-level license that allows driving a wide range of vehicles. A1 License: Permitted vehicle type: large buses. This is an advanced, high-level license for drivers with top-tier driving skills.
9
1
Share

What is the Scrap Life of a Family Car?

For private passenger vehicles, family 5-seat sedans and 7-seat SUVs, as well as non-commercial small and mini vehicles, there is no usage lifespan limit. When the normal driving mileage reaches 600,000 kilometers, the state will guide the vehicle to be scrapped. In addition to the above-mentioned vehicles, small and mini non-commercial passenger vehicles, large non-commercial sedans, and wheeled special machinery vehicles also have no usage lifespan limit. Motor vehicle scrapping process: 1. The car owner applying for scrapping and renewal should fill out the "Motor Vehicle Change, Transfer, Modification, Suspension, and Scrapping Approval Application Form" in duplicate and affix the owner's seal. 2. Apply at the registration acceptance counter. For vehicles that have reached the scrapping age, the "Vehicle Scrapping Notice" will be issued. For vehicles that have not reached the scrapping age, after inspection and confirmation by the motor vehicle inspection counter that they meet the scrapping standards, the "Vehicle Scrapping Notice" will be issued. 3. The vehicle owner can choose a qualified recycling company to send the vehicle for dismantling with the "Notice". 4. After verifying the "Notice", the recycling company will dismantle the vehicle and take photos. The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. 5. The vehicle owner should submit the "Change Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the motor vehicle inspection counter for verification and signature. The license plates and certificates will be reclaimed, and the application will be submitted for approval according to regulations to complete the scrapping registration.
17
0
Share

How to Deal with Stains on Car Paint?

It is particularly important to promptly address stains on car paint. If detected early, they can be wiped off directly with a cloth. However, if paint or grease stains have been present for a long time, the paint surface may develop wrinkles, bubbles, cracks, or the so-called "orange peel" effect. In such cases, simply waxing is no longer sufficient. It is necessary to use sandpaper specifically designed for car cleaning to remove the paint or grease stains, followed by waxing to restore the shine of the car surface. Below are solutions for yellowing white car paint: 1. Wash the car frequently: Most cars are parked outdoors, exposed to wind, rain, and sunlight, which can oxidize the paint. Rainwater contains a large amount of acidic substances that can be corrosive. If not cleaned in time, the car will lose its shine and yellow more quickly. White cars are more susceptible to yellowing compared to other colors, so frequent washing is essential. 2. Waxing: Another reason white cars are prone to yellowing is that the paint surface has many tiny gaps, which are difficult to see with the naked eye but can absorb dust particles from the air, accelerating paint oxidation. Therefore, the best solution is to apply wax, which forms a protective film on the paint surface, effectively preventing yellowing. 3. Glaze sealing maintenance: Cars are inevitably prone to scratches, which can leave marks. Repainting can easily result in mismatched paint colors. Therefore, it is advisable to perform a glaze sealing treatment to maintain the paint's shine.
3
1
Share

How long after failing the driving test subject 2 can you retake it?

If you fail the subject 2 driving test, you need to wait ten days before you can reschedule. For the subject 2 test, if you fail the first attempt, you are allowed one retake. If you do not take the retake or fail the retake, the current test session is terminated, and the applicant must reschedule the test after ten days. Below are some important notes for the subject 2 driving test: 1. Fasten your seatbelt: Buckle up immediately after getting in the car. Make sure not to fasten it backward or to the passenger seat, as the system will directly deem the test a failure. Do not unfasten the seatbelt during the entire test. 2. Adjust the seat and mirrors: After entering the car, adjust the seat and mirrors, fasten the seatbelt, turn on the left turn signal, shift into first gear, and release the handbrake. These six steps are essential. Ensure all preparations are complete before starting. 3. No stopping during the test: There is no time limit for reversing into the parking space, but you must not stop during the process. If the wheels remain stationary for 3 seconds, the system will judge it as stopping midway. Therefore, controlling the speed is crucial. 4. The hill start time limit is 30 seconds: The time allowed for hill starts is 30 seconds, with a voice prompt every 10 seconds. Exceeding 30 seconds will result in an automatic failure.
2
4
Share

What Causes the Jerking Sensation When Shifting Gears in a Car?

Car gear shifting has a jerking sensation due to improper driver operation and mismatched engine speed with gear position. Below is a related introduction about jerking during car gear shifting: Improper driver operation: The intensity of the jerking sensation during gear shifting is closely related to the driver's control skills. If the timing of gear shifting is not well grasped, there will naturally be a jerking sensation. Gear position switching, including automatic transmission cars, has protection and interlock mechanisms. If switching from D gear to R gear or P gear is done incorrectly, it can be dangerous during driving. However, switching between D gear and N gear can be done freely, including while driving. Mismatch between engine speed and gear position: The jerking sensation during gear shifting is mainly caused by the mismatch between the car's engine speed and wheel speed. The main function of the transmission is to change the speed ratio between the engine and the wheels, expanding the range of speed changes to adapt to speed variations in different environments. Therefore, the transmission can reduce this jerking sensation to a certain extent, making the power output smoother. Generally, the better the transmission and engine are matched, the smaller this jerking sensation will be.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.