How long is the Toyota Highlander?

Is a 13-year-old car still exempt from inspection in 2019?

A 13-year-old car in 2019 needs to undergo an inspection at the testing station, as new cars are exempt from inspection for the first six years. Here is the relevant information: 1. During the annual inspection, the car must go through the testing station, where professional staff and equipment are responsible for checking the vehicle. The inspection includes testing exhaust emissions, the lighting system, the braking system, the chassis, and the exterior. 2. If the exterior has been modified, the car will not pass the inspection. Therefore, avoid making unauthorized modifications to your vehicle during regular use. 3. Before the annual inspection, check the car's lighting system in advance. If any lights are damaged, repair them beforehand to avoid complications. 4. If the car has not been serviced for a long time, consider getting it serviced before the inspection. During regular use, avoid using low-quality gasoline, as it can lead to increased carbon deposits in the engine, which is harmful to the engine.

6

5

Share

Is the 2021 X-Trail transmission the same as the 2020 model?

2021 X-Trail transmission is the same as the 2020 model. The function of the transmission: to change the transmission ratio to expand the range of torque and speed changes of the driving wheels, adapt to frequently changing driving conditions, and allow the engine to operate under favorable working conditions. The following is a related introduction to the X-Trail: 1. The length, width, and height of the X-Trail are 4675mm, 1820mm, and 1722mm respectively, with a wheelbase of 2706mm, a minimum ground clearance of 208mm, and a fuel tank capacity of 65 liters. 2. In terms of power, the X-Trail is equipped with a 2.0L naturally aspirated engine, with a maximum power of 111kW and a maximum torque of 194Nm, paired with a CVT continuously variable transmission.

13

2

Share

How to Exit Cruise Control?

Press the cruise control switch (control) button to turn off the cruise control function. The cruise control buttons are usually located near the steering wheel and mainly come in three types: lever-style, steering wheel button-style, and steering wheel control group-style. The specific operation methods are as follows: 1. Press the power button to activate the system, and the cruise control indicator light on the dashboard will illuminate; 2. Accelerate to the desired speed and press the SET button. At this point, you can release the accelerator pedal with your right foot, and the speed will be maintained at the current level; 3. You can fine-tune the speed using the "RES+" and "SET-" buttons; 4. There are three ways to deactivate cruise control: stepping on the brake, pressing the cancel (CANCEL) button, or pressing the power (ON/OFF) button; 5. If cruise control is canceled by stepping on the brake or pressing the cancel button, you can press the RES button to resume the previous cruise control speed.

8

2

Share

What is the fuel consumption of the Haval F7x 2.0?

The comprehensive fuel consumption of the Haval F7x 2.0 is 7.1-7.8L/100km. There are currently three models of the Haval F7x 2.0 on sale: the two-wheel-drive Extreme Intelligence Trend Edition, the two-wheel-drive Extreme Intelligence Technology Edition, with a comprehensive fuel consumption of 7.1L/100km. The four-wheel-drive Extreme Intelligence Performance Edition has a comprehensive fuel consumption of 7.8L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 8.0-9.0L/100km. The level of a car's fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when encountering a red light, can increase fuel consumption. The car itself: Cars with larger displacements consume more fuel than those with smaller displacements because larger displacements generally mean higher power, requiring more gasoline to burn and perform work. Cars with greater weight have higher fuel consumption because greater weight requires more driving torque. Road conditions: Dirt roads, muddy roads, soft surfaces, mountain roads, etc., where driving resistance is high, can increase fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low during a cold start, the injected gasoline is less likely to atomize, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. At the same time, low temperatures cause the engine computer to control the engine to run at higher speeds to warm up, which also increases fuel consumption.

5

2

Share

What does the e-gear mean?

e-gear means the energy-saving gear. Like the d-gear, it is used for moving forward, but it can save 10% to 30% of electricity. Turning the gear knob to the e-gear starts the energy recovery mode. This mode converts the kinetic energy generated by the car itself into electrical energy. Generally, vehicle transmissions have P, R, N, D, 3, 2, and 1 gears: P-gear is the parking gear, and the selector lever must be moved to the P position when the car is parked; R-gear is the reverse gear; N-gear is the neutral gear, which can be used when starting or towing; D-gear is the forward gear, and when driving normally, the selector lever is placed in the D position, allowing the car to automatically shift between gears 1 to 3 or 4 and 5.

3

5

Share

What are the dangers of excessive tire pressure?

The dangers of excessive tire pressure: 1. The friction and adhesion of the tire will decrease, affecting braking performance; 2. It can cause steering wheel vibration and deviation, reducing driving comfort; 3. Accelerates localized wear of the tread pattern in the center of the tire, shortening tire lifespan; 4. Increases body vibration, indirectly affecting the lifespan of other components; 5. Causes excessive stretching deformation of the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; 6. Reduces the tire's resistance to punctures, making it easier for sharp objects like nails or glass on the road to penetrate the tire, leading to internal cracks, blowouts, and potential tire bursts.

8

0

Share

How long is the Toyota Highlander?

Is a 13-year-old car still exempt from inspection in 2019?

Is the 2021 X-Trail transmission the same as the 2020 model?

How to Exit Cruise Control?

What is the fuel consumption of the Haval F7x 2.0?

What does the e-gear mean?

What are the dangers of excessive tire pressure?

Is Polishing Necessary After Car Painting?

How to Install a Car Wash Water Gun?

How to Identify if a Used Car is an Accident Vehicle?

What are the reasons for compressor failure?