How Long is the Shelf Life of Engine Oil?

Should ECON Be Turned On for Winter Heating?

Winter heating does not require turning on ECON. ECON only takes effect when the air conditioning is set to cooling mode, as ECON represents the air conditioning's economy mode. Below is its related introduction: When to turn on ECON: It is recommended to turn on ECON during traffic jams, but not when the road is clear. ECON is controlled by the vehicle's onboard computer. When this function is selected, the onboard computer controls fuel injection volume, transmission shift timing, etc., based on pre-programmed data. When to turn off ECON: When the vehicle speed is very high (reaching 100KM/h), the vehicle requires better dynamic performance during high-speed driving. At this time, the acceleration effect of ECO is not good, requiring a deeper press on the accelerator, but the fuel-saving effect is not obvious. Moreover, even if ECO is turned on, the onboard computer will prioritize speed, and the ECON mode automatically becomes ineffective. When high torque output is needed, such as when climbing a slope, the engine computer will prioritize ensuring sufficient power to drive the vehicle, and the ECON mode will not work either.

2

4

Share

What is the method to repair a dent on a car hood?

The method to repair a dent on a car hood is: 1. First, use a marker to identify the dent on the hood; 2. Then spray some cleaner to prevent dust around the dent from affecting the repair; 3. Find a suction cup that matches the size of the dent and apply some glue to the back of the suction cup; 4. Fix the suction cup on the dent of the hood and leave it for a while until the glue solidifies; 5. Use a pry tool to remove the suction cup, and when the suction cup is lifted, it will pull up the dented area. The method to open the car's engine hood is: 1. Press the engine hood button on the left side of the steering wheel; 2. Get out of the car, walk to the front, gently lift the engine hood, and support it with the rod. The method to close the engine hood is: 1. Remove the support rod and slowly lower the hood with both hands; 2. When the hood is about 20cm from the closing point, release both hands and let the hood fall freely, and you will hear a crisp closing sound.

15

2

Share

What Do Engine Power, Torque, and Horsepower Mean?

Here are the detailed explanations of engine power, torque, and horsepower: 1. Power: Power refers to the work done by an object per unit of time. The higher the power, the higher the rotational speed, and the higher the maximum speed of the car. Maximum power is commonly used to describe a car's dynamic performance. 2. Horsepower: Maximum power is usually expressed in horsepower (PS) or kilowatts (kW), with 1 horsepower equal to 0.735 kilowatts. 3. Torque: Torque is an important parameter of engine performance, referring to the average moment output from the crankshaft during engine operation. The greater the torque, the higher the engine output, and the faster the crankshaft speed changes, improving the car's climbing ability, starting speed, and acceleration. Maximum torque generally occurs in the medium to low-speed range of the engine and tends to decrease as the speed increases. The unit of torque is Newton-meters (N·m) or kilogram-meters (Kg·m).

9

5

Share

Where is the seat heating in the old model Koleos?

The specific location of the seat heating switch in the old model Koleos is on the lower left side of the driver's seat cushion. The button is marked with a seat icon featuring three or four vertical lines. Below is an analysis of reasons why the Koleos may not start: 1. No fuel: If the fuel gauge shows below the red line, the car naturally won't start. 2. Dead battery: This could be due to a drained battery from leaving headlights on for too long or the battery reaching the end of its lifespan. It's generally recommended to replace the battery every 2 years. Additionally, installing xenon headlights, high-power audio systems, or DVD players can also cause vehicle circuit malfunctions. 3. Incorrect gear position: For automatic transmission vehicles, the gear must be in P or N to start. If it's in R or D, the car won't start. Some manual transmission cars may also fail to start if the clutch isn't depressed. 4. Vehicle usage issues: Using improper fuel, not adding antifreeze, or excessive carbon buildup can cause starting issues. Beyond human operational errors, potential causes include motor failure, fuel pump or injector problems, or sensor malfunctions. These more complex situations require professional attention.

17

3

Share

What brand are the original tires on the Focus?

Depending on the model configuration and manufacturing batch, the Focus may be equipped with tires from different brands, such as well-known brands like Goodyear, Michelin, and Continental. Tire Introduction: Tires are ring-shaped elastic rubber products mounted on various vehicles or machinery for ground contact and rolling. They are typically installed on metal rims to support the vehicle body, absorb external shocks, ensure contact with the road surface, and maintain driving performance. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and extreme temperatures during operation. Therefore, they must possess high load-bearing capacity, traction performance, and shock absorption. Additionally, they require high wear resistance, flexibility, and low rolling resistance with minimal heat generation. Focus Introduction: The Ford Focus family is built on Ford's new mid-size car platform, integrating the company's strong R&D capabilities and the collective expertise of its global engineering team. With world-leading powertrain technology, racing-grade chassis tuning, stylish and sporty exterior design, and cutting-edge smart technology, the Focus delivers exhilarating driving pleasure, setting a new benchmark for mid-size car driving enjoyment.

3

0

Share

What does MIC mean on a car?

MIC in a car stands for Microphone. Inside the vehicle, the microphone is primarily used for Bluetooth hands-free calling and navigation voice playback, among other functions. The technical term for a microphone is actually 'transducer,' which is a device that converts sound signals into electrical signals, derived directly from the English word 'Microphone.' Wireless microphones can generally be categorized into three frequency bands, as follows: 1. FM Band: Since FM radios operate between 88-108MHz, and FM band wireless microphones operate above 108MHz, typically between 110-120MHz, FM radio signals do not interfere with FM band wireless microphones. This type of wireless microphone is simple in structure and low-cost, but the sound quality is relatively poor. 2. VHF Band: The VHF band, commonly referred to as the V band, operates between 180-280MHz. Due to its higher frequency, it experiences less interference and uses crystal frequency locking for more stable reception performance. 3. UHF Band: The UHF band, commonly referred to as the U band, operates between 700-900MHz. At such high frequencies, there is almost no interference from other external frequencies. Additionally, U band devices often use surface-mount components, resulting in very stable performance and excellent sound quality.

19

1

Share

How Long is the Shelf Life of Engine Oil?

Should ECON Be Turned On for Winter Heating?

What is the method to repair a dent on a car hood?

What Do Engine Power, Torque, and Horsepower Mean?

Where is the seat heating in the old model Koleos?

What brand are the original tires on the Focus?

What does MIC mean on a car?

Can Driving Schools Provide Practice Driving?

What is the Difference Between an Automobile Sales Service Company and a 4S Store?

What brand is Savana?

How many points are deducted for touching the yellow dashed line during parallel parking?