How Long is the Service Life of Passenger Car Tires?

What are the 'Three Slow Aunties' on the road?

Corolla, Levin, and Sylphy are jokingly referred to as the 'Three Slow Aunties' on the road due to their slightly slower speed. Extended information about Corolla, Levin, and Sylphy is as follows: 1. Configuration: None of the three models have rear air conditioning vents. The differences in comfort configurations are mainly reflected in the seats. The driver's seat of the Corolla is manually adjustable, while the Levin and Sylphy feature 6-way electric adjustment. Additionally, except for the Levin, which does not have full leather seats, the other two models come with full genuine leather seats. 2. Interior: The Corolla's interior is primarily beige, while the Levin adopts an all-black interior to emphasize a sporty style. The differences in interior design between these two models are minimal, with variations only in the dashboard and air conditioning panel designs. As for the Sylphy, its interior ambiance is similar to the Corolla, but it features wood-grain plastic trim panels in areas like the gear shift console, giving it a more homely feel.

16

4

Share

What does the EPS light in a vehicle mean?

When the EPS light is illuminated in a car, it indicates a malfunction in the Electric Power Steering system. Here is some information about EPS: 1. EPS stands for Electric-Power-Steering, which is the development direction of automotive steering systems. This system provides steering assistance directly through an electric motor, saving energy and being environmentally friendly. Due to these advantages, EPS, as a new steering technology, is challenging the well-known hydraulic steering system that has been in use for over 50 years. 2. Reasons for the EPS light to illuminate: (1) Possible damage to the steering sensor; (2) Or damage to the steering gear; (3) Or leakage of power steering fluid. 3. A malfunction in the EPS system may result in the car being unable to steer or steering abnormally, in which case it is necessary to go to a 4S shop for inspection and repair. If the EPS power steering system is damaged, it can significantly impact the driver.

15

3

Share

How to Turn on the Fog Lights on a Santana?

To turn on the fog lights on a Santana, you need to first activate the vehicle's lighting system by turning on the position lights. Then, locate the fog light symbol on the lighting control lever and rotate the control ring. Align the front fog light symbol with the activation point, and the dashboard will display the front fog light indicator, indicating that the front fog lights are on. Here is some information about fog lights: 1. Fog lights, generally referring to automotive fog lights, are installed at the front and rear of the vehicle. They are used because visibility is low in foggy conditions, limiting the driver's line of sight. 2. Front fog lights are mounted slightly lower than the headlights at the front of the car and are used to illuminate the road during rainy or foggy weather. Due to reduced visibility in fog, the driver's vision is restricted. Fog lights can increase the visibility distance, especially yellow anti-fog lights, which have strong light penetration. They enhance the visibility for the driver and other road users, allowing approaching vehicles and pedestrians to spot each other from a greater distance.

14

5

Share

Where to Add Windshield Washer Fluid for Toyota Camry?

The location to add windshield washer fluid for Toyota Camry is inside the black cover near the right headlight in the engine compartment. Windshield washer fluid, commonly known as car windshield cleaning fluid, is a consumable item in vehicle usage. There is a windshield washer fluid level indicator on the car's dashboard. When driving, if the windshield washer fluid is almost used up, this light will start flashing, reminding the owner to add more fluid. The Toyota Camry is a model under GAC Toyota, classified as a B-segment car according to national standards. In terms of body dimensions, the Toyota Camry measures 4885mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm.

11

1

Share

What lights to use when passing through an intersection ahead?

When driving straight through an intersection with traffic signals ahead, simply use the low beam. If passing through an intersection without traffic signals, you should alternately switch between high and low beams more than twice, slow down in advance, and use the alternating high and low beams to signal while closely monitoring the traffic conditions ahead. Here are the specific details: When overtaking: When overtaking at night, turn on the turn signal in advance and observe the vehicles behind. If the following vehicle is too close, it is not advisable to signal and overtake, as this may easily catch the following vehicle off guard. When changing lanes: To prevent the vehicle ahead from changing lanes during overtaking, it is essential to alert the other driver by honking or quickly switching between high and low beams. Observe the vehicle ahead; if there is no intention to change lanes, you can then accelerate to overtake. If the vehicle ahead turns on the left turn signal, it indicates an emergency situation ahead, making it an unsuitable time to overtake, as the vehicle also needs to change lanes.

4

0

Share

How to Properly Tune the Frequency of a Car Audio System?

How to adjust car audio frequency: (For those with an added equalizer, first set the main volume of the equalizer to approximately 75%) After the amplifier installation is complete, start by turning down the volume of both the head unit and the amplifier to "0". The crossover points and other functions of the amplifier: The front soundstage amplifier's crossover switch should be set to High Pass (HIGHPASS or HP): Adjust the crossover point between 80Hz-120Hz (usually starting with 90Hz as a reference). The rear soundstage amplifier should also be set to High Pass (HIGHPASS or HP): (If there is no rear soundstage configuration, this step can be omitted) Set the crossover point between 200Hz-400Hz. The subwoofer amplifier's crossover switch should be set to Low Pass (LOWPASS or LP): Adjust the crossover point between 80Hz-120Hz (The subwoofer amplifier, like the front soundstage amplifier, must have matching crossover points. If the front soundstage amplifier is set above 90Hz, the subwoofer amplifier must be set below 90Hz. Avoid settings like below 90Hz and above 120Hz, as this can cause certain audio frequencies to be missed, resulting in poor audio transitions).

6

2

Share

How Long is the Service Life of Passenger Car Tires?

What are the 'Three Slow Aunties' on the road?

What does the EPS light in a vehicle mean?

How to Turn on the Fog Lights on a Santana?

Where to Add Windshield Washer Fluid for Toyota Camry?

What lights to use when passing through an intersection ahead?

How to Properly Tune the Frequency of a Car Audio System?

What Causes the Ford Focus to Have Jerky and Weak Acceleration?

How to Use an Automatic Transmission?

What does the exclamation mark on the car steering wheel mean?

How many kilometers can you drive when the car fuel light comes on?